PA Holiday Turbo DEK Part Out
12-04-2010, 03:29 PM
#1
Holiday Turbo DEK Part Out
Ok so it's my turn and I am parting out the maxima. Everything it forsale but for I can move the car around something will be sold in stages. To learn more about the car you can read this thread.
http://forums.maxima.org/supercharge...rbo-build.html
http://www.cardomain.com/ride/250874...-nissan-maxima
I am parting out the entire car so if you need something let me know if you dont like the price let me know. BTW this is a 1997 pearl white gle 5-speed turbo dek
Items forsale shipping is not included:
Turbo Kit - sold
jwt ecu - sold
I have a custom tune for 550cc injectors, 7200 rev limit and 20degree's of timing not the standard 10
tan front leather seats : sold
pftb - sold
pftb adapter plate - sold
97 5-speed ecu - sold
wrapped shortie obx headers - sold
3inch mandrel exhaust with a 23inch resonator and muffler - Keeping
5-speed tranny with about 140k- sold
brand new starter from autozone with 3 cranks on it - Keeping
koyo radiator with about 10k miles- sold
ac condensor - Keeping
ac compressor - Keeping
ps pump - 5
front strut bar - sold
fans - Keeping
dek motor without the topend was told it has 57k -sold
3.0 timing equipement with upper and lower oil pan -sold
headlights - sold
clear bumper lights - sold
tail lights sold
act sprung 6 puck with hd psi plate -sold
Napa drivers side abs axle with about 5k miles -sold
oem passanger abs side axle - 35 remember no core needed
shell - sold
poly filled rear mount "the one near the firewall" -Sold
notched front motor mount with es insert - Sold
poly filled 5 speed tranny mount - Sold
Staggered 19inch G35c Rays with zero curb rash and tires - Keeping
slave cylinder - sold
one piece braided clutch line - sold
5-speed shifter trim and boot -sold
5-speed shift **** -Sold
flywheel and bolts - Sold
5.5gen bbk - Keeping
5.5gen calipers, brackets, pads and rotors
3.0 crank pulley - Sold
complete dek coolant log - 20
this includes the part that goes into the block
4gen coolant log - 15
dw 600cc injectors with about 36k miles - Sold
ichiba 15mm wheel spacers with hub rings - Sold
ichiba 25mm wheel spacers with the hub rings - Sold
power rod block off plate - Sold
2002 fuel rail - 5
tan leather I30 rears with headrest - Sold
18x8.5 rims with tires - Sold
dek lim - Sold
"swirl valves removed, holes welded shut, runners light ported to removed all casting marks and smoothed out"
3 dek/3.5 injector pigtails - 15
dek fuel rail - 5
6 dek injectors - 20
"2 are missing the plastic peice on the bottom"
rear dek valve cover - 25
front dek valve cover - 20
tein s-techs springs fronts are kyb gr2's and the rears are tokico illuminas 5way adjustables - Keeping
2002 front and rear valve covers - Sold
these are just some things off the top of my head if you can think of something let me know
the fastest way to reach me is text or email - inzom@yahoo.com or 215 280 7144
Sorry the hks bov "sold", injectors, turbo and wastegate are not forsale as I plan to use them to boost my G35c but if you really want them make me a offer
http://forums.maxima.org/supercharge...rbo-build.html
http://www.cardomain.com/ride/250874...-nissan-maxima
I am parting out the entire car so if you need something let me know if you dont like the price let me know. BTW this is a 1997 pearl white gle 5-speed turbo dek
Items forsale shipping is not included:
Turbo Kit - sold
jwt ecu - sold
I have a custom tune for 550cc injectors, 7200 rev limit and 20degree's of timing not the standard 10
tan front leather seats : sold
pftb - sold
pftb adapter plate - sold
97 5-speed ecu - sold
wrapped shortie obx headers - sold
3inch mandrel exhaust with a 23inch resonator and muffler - Keeping
5-speed tranny with about 140k- sold
brand new starter from autozone with 3 cranks on it - Keeping
koyo radiator with about 10k miles- sold
ac condensor - Keeping
ac compressor - Keeping
ps pump - 5
front strut bar - sold
fans - Keeping
dek motor without the topend was told it has 57k -sold
3.0 timing equipement with upper and lower oil pan -sold
headlights - sold
clear bumper lights - sold
tail lights sold
act sprung 6 puck with hd psi plate -sold
Napa drivers side abs axle with about 5k miles -sold
oem passanger abs side axle - 35 remember no core needed
shell - sold
poly filled rear mount "the one near the firewall" -Sold
notched front motor mount with es insert - Sold
poly filled 5 speed tranny mount - Sold
Staggered 19inch G35c Rays with zero curb rash and tires - Keeping
slave cylinder - sold
one piece braided clutch line - sold
5-speed shifter trim and boot -sold
5-speed shift **** -Sold
flywheel and bolts - Sold
5.5gen bbk - Keeping
5.5gen calipers, brackets, pads and rotors
3.0 crank pulley - Sold
complete dek coolant log - 20
this includes the part that goes into the block
4gen coolant log - 15
dw 600cc injectors with about 36k miles - Sold
ichiba 15mm wheel spacers with hub rings - Sold
ichiba 25mm wheel spacers with the hub rings - Sold
power rod block off plate - Sold
2002 fuel rail - 5
tan leather I30 rears with headrest - Sold
18x8.5 rims with tires - Sold
dek lim - Sold
"swirl valves removed, holes welded shut, runners light ported to removed all casting marks and smoothed out"
3 dek/3.5 injector pigtails - 15
dek fuel rail - 5
6 dek injectors - 20
"2 are missing the plastic peice on the bottom"
rear dek valve cover - 25
front dek valve cover - 20
tein s-techs springs fronts are kyb gr2's and the rears are tokico illuminas 5way adjustables - Keeping
2002 front and rear valve covers - Sold
these are just some things off the top of my head if you can think of something let me know
the fastest way to reach me is text or email - inzom@yahoo.com or 215 280 7144
Sorry the hks bov "sold", injectors, turbo and wastegate are not forsale as I plan to use them to boost my G35c but if you really want them make me a offer
Last edited by t6378tp; 05-16-2011 at 08:17 PM.
12-04-2010, 04:58 PM
#3
12-05-2010, 05:23 AM
#16
The are pic's on the 1st page of my build thread and some on my cardomain but they havn't been wrapped on those pic's
12-05-2010, 09:51 AM
#20
12-05-2010, 02:30 PM
#24
12-05-2010, 06:45 PM
#29
12-05-2010, 07:36 PM
#31
its just when u mentioned shorty obx i was thinking you meant the non equal length ones on ebay as opposed to the equal length ones every gets thats why i was confused but its all good. good luck with sale.
12-06-2010, 09:41 AM
#34
12-06-2010, 09:49 AM
#35
12-06-2010, 01:47 PM
#38
