Conversation Between Bonka and MadManMax-M3
Showing Visitor Messages 1 to 8 of 8
-
Ok Thanks, I will let you know my updates soon!
-
I didn't know that the spacers come in that size. OK sounds good, yeah that's a better idea. Could you explain what you mean? Are you saying that two 10mm will put more stress on the hub and its a better route for me just to get 20mm spacers?
Just to give you some background information. I currently will be redoing my 2002 maxima 17 inch rims. I would have just preferred to get wider tires like 235/ or 245 but it is recommended to just use 225/50/R17 with these rims since they are relative skinny in thickness. Since I will be pulling and rolling my fenders, I would like my stance to be more broad hence why I am looking to use the 20mm thickness from the spacers. Also, down the line when I am able to raise some funds, I plan to get 20 inch rims that are 8.5 in thickness and I will use 245/40/R20 tires. Originally I was thinking that I should get a bunch of 10mm spacers because I would have just used one 10mm spacer with the 20s and 2 10mm spacers per rim with the 17s.
-
Why couldn't you use 1x20mm spacers? Rather unsafe since you are putting stress on the hub.
For 20mm you would probably want 60mm extended lugs.
-
yes, that's correct. So total I would need 8 10mm spacers.
-
To clarify, you want to stack 2x10mm spacers per axle?
-
Thanks. OK cool. I would have gone coilovers too but the funds aren't there so I ill just do lowering springs for the time.
I asked about spacers because I would like to use two 10mm spacers per rim, do you know what length studs I would need to get?
-
Thanks for the compliments. Yup, familiar with spacers. I'm on Progress coilovers.
-
Hey, you did a really awesome job with you max! Are you familiar with using spacers? And also, are you on coilovers or just lowered springs?