FS:4 - 19x8.5 SSR Comps $350 - couple probs

*NCSU_MAX* · 10-01-2009, 10:31 AM

Up for sale are my 19x8.5 et38 SSR competitions. Pictures will be up later this afternoon.

Here's the deal with these. 1 wheel is immaculate, 1 wheel has very light curb rash, 1 wheel has a smudge/scrape on the face, and one wheel is pretty screwed up with a cracked lip. The car was run off the road and smacked into a curb. The other car caused the damage to the face, and the curb cased the damage to the front and the minor rash spot on the rear. I have been told by a couple sources that because the wheel/tire still maintains pressure, it can likely be fixed. I wouldn't necessarily drive hard on it, but I did for several weeks with the lip cracked and never lost tire pressure. If you were to find 1 new/used wheel then you would have an excellent set of wheels for dirt cheap.

The tires need to be replaced - the BFG kdw2's have flat spots and the fk452's have very little life left in them.

I'm only asking $350 plus shipping because my new wheels are in and need these out of my garage. Being that the tires need to be replaced I can have them removed, but that will cost extra, and shipping them with the tires makes it much easier for packaging and roughly equal cost on shipping.

PM me with any questions - Paypal address is ghsmith@ncsu.edu

*Mad-MAX_SE* · 10-01-2009, 10:33 AM

damnit, I was logged in as my roomate...

PM's should go to me.

Pictures - the wheels are dusty/dirty since i haven't had a chance to wash the car in a week or three >.>

Good wheel:

Scuffed wheel:

Wheel with about 3-4" long light curb rash:

*Mad-MAX_SE* · 10-01-2009, 01:27 PM

Cracked wheel:

*cardana24* · 10-01-2009, 01:37 PM

can I have just the cracked wheel?

Good luck with the sale George. Also is that the lug pattern stamped on the front of the wheel? 5x100?

*Mad-MAX_SE* · 10-01-2009, 01:49 PM

Haha, thanks bud. I honestly have no idea why they say that, even when Grant first got them I thought they sent him the wrong bolt pattern. they're definitely 5x114.3

no way they would fit with them being 5x100...

*trand71* · 10-06-2009, 12:44 AM

I like the rims, do you think i could JB weld the inner and put it on the outter and then powdercoat them? How much would shipping be to 81101? Thanks....

*cardana24* · 10-06-2009, 06:55 AM

Quote:

Originally Posted by trand71

I like the rims, do you think i could JB weld the inner and put it on the outter and then powdercoat them? How much would shipping be to 81101? Thanks....

Please don't do that.

*Conrad283* · 10-06-2009, 07:04 AM

Quote:

Originally Posted by trand71

I like the rims, do you think i could JB weld the inner and put it on the outter and then powdercoat them? How much would shipping be to 81101? Thanks....

I don't think that would be very safe.

*Mad-MAX_SE* · 10-06-2009, 07:55 AM

Quote:

Originally Posted by trand71

I like the rims, do you think i could JB weld the inner and put it on the outter and then powdercoat them? How much would shipping be to 81101? Thanks....

You're going to want to send the wheel out for repair. They'll need to, i believe, heliarc weld the lip, then refinish the lip. Or you can find 1 more wheel and get 3 $600 wheels for $350 plus shipping.

The estimated shipping cost is roughly $45 a wheel to your zipcode through USPS, $55 through UPS, and $44 through FedEx.

let me know if you're still interested.

*Mad-MAX_SE* · 10-07-2009, 11:31 AM

Price drop to $300 picked up or $450 shipped obo. Need these gone.

Paypal address is ghsmith@ncsu.edu

*Mad-MAX_SE* · 10-13-2009, 07:58 AM

New week, price drop to $400 shipped, $275 picked up.

phatboislim · 10-13-2009, 08:18 AM

*SUBSCRIBED*

Infam0usMax · 10-15-2009, 12:36 AM

still have these wheels? PM ME is so

*Mad-MAX_SE* · 10-19-2009, 08:20 PM