|
'You kno what they say about small hands..."
Wait... scratch that. LOL.
Ok, what you need is, 10mm wrench, 12mm wrench, and something long for leverage, at least 12" long.
You'll need to unplug the IACV, the green thing in the way. Unplug it, then pull out the 2 vacuum tubes attached. Then take the 10mm closed end to loosen the nut underneath. Use the leverage tool you have to crank away. After breaking the nut loose, finish removing with hands, careful don't lose the nut!
Then use closed end of 12mm wrench on the knock sensor. Small hands helps a lot here. Again, use your leverage tool to crack loose the bolt. Finish removing bolt by hand. Really should take ~15min, maybe even 10min with experience.
Good luck!
Dr J
|