Washington D.C. areaDC, MD, NC, VA, WV Maxima owners.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
Post your abilities and resources for installing parts and accessories as well as your location.
Please do not make requests for help in this thread. Contact the listed person(s) via PM or email.
My add;
I am located in Charlotte N.C. and I have access to my employers auto shop on the weekends and after normal business hours of 8am-6pm. I can do virtually everything including motor swaps, manual tranny rebuilds, high end custom nitrous installs, suspension setups, etc. I do very good work and I price the jobs fairly.
Email, PM or send an IM to me for additional info.
I do suspension work, prefer not to do coil over installs but hey if the price is right, I can make it fit. I will come highly recommended among the DCmax group, I've installed springs and struts on nearly 15-18 of the DCmax cars. I will come to your home to do it, its all about fun. I'm located in Whitemarsh Maryland, but will travel within a reasonable distance. PM me for more info.
Greddy Emanage install, setup and minor tuning
S-AFC installs and minor tuning
corner re-wires(3rd and 4th gen)
ECU installs (arrrrgh... )
misc 3rd gen maintnence/repair
I do a bit of custom stereo installation. Kick panels, custom sub boxes and what not. Technically I am certified but I don't work for a shop. I primarilly do installs in my own or friends vehicles and an occassional org member. I have a 4th gen and don't honestly have experience with other gen's yet. I've done everything from an alternator swap / upgrade to cutting out the rear deck and fabricating a new deck.
I was a professional installer (MECP certified) for nearly 12 years, and have built cars that have made IASCA world finals.I was the install manager for Myer-Emco for 4 years, and also used to work for Sound Solutions, and New Sound. I have all the tools, and knowhow to do just about anything out of my house. I can do video, SPL, custom doors/dash/trunk/whatever. I can do most bolt on that do not require a lift. I like to do custom work, and have worked on a few .org members cars. I am willing to do installs on the side, and I usually charge about 1/2 of what a shop does. If you need some product, I work at a store that sells both car and home audio. IF you PM me about a job, I will get back to you within a few days, as I am not on the computer everyday. I have lots of pictures to show some of my work, but they are in my toolbox, not on computer. Now that the weather is getting better, it is time to reopen shop....
I now own my own business www.crossoveravs.com, and I can take care of any home wiring needs. I do anything from additional phones, cables or ethernet runs, to full home theater, plasma tv installs, video surveillance, and I also have the ability to get you a home security system as well.
I also have a T-shirt business as well. Any concepts or ideas that you have, I can have printed for you.
The fact that you have "Honda Civic" written on the back of your car. And the fact that I have "Subaru Impreza WRX STi" written on the back of mine. Should precipitate your balls into shrinking, along with your presence. Now...Fook off!
put me down for Honda/Acura stuff too(yeah I know...)
B series motor swaps(EF chasis especially)
OBD swaps
ECU chip burning
maintenence
blah, blah...Hondas are like Legos, even if I don't how to do it I an figure it out
and I'll also throw out a vouch for Tapout's work...he put a stereo in my ex's car and he did a sweet glassed trunk setup for Max O/D(Jahlil)'s 240...remember me Jason, I'm the other guy with the dreads
Lets see what I can do:
Besides restoration of classic British sportscars, on the 5th gen maxima I can do/help out with such basic things as:
- Install of RSB and other suspension components
- Install of the "BlehmCo" brake kit for you 5th genners who got it.
- Install of the Redline shift and ebrake boots (it's not as easy as it looks)
- Installation/fitting/advice on Thule and Yakima roof racks (I work for an authorized dealer of these systems during the winter...)
Also, for anyone who has a roof rack and fairing (on your maxima or other car) I can paint it for your in various fades/colors to match your car or whatever. Not that hard but I enjoy doing it and they generally turn out well (I've done them for 3 or 4 friends cars and they give a nice touch in place of the boring black fairing)...
I am also available if anyone has too much beer at their house and needs me to come over and drink it.
__________________ Sold: 2000 Maxima SE - PR Intake - Frankencar CB - Truax SFCs - Wilwoods - Eibachs - Blehm LTB - Cattman Ypipe
Stillen RSB - RSTB - FSTB - ES Bushes - G wheels - Raxles - Mach1 lip - Illuminas - and plenty more
I'm in the Virginia Beach - Norfolk - Chesapeake - Portsmouth - Suffolk area for the summer. I can install:
Anti-sway bars
Nitrous-oxide kits
Intakes
Exhaust systems
Body panels
Lights and
Polish metal pieces
Wire simple electronics
Detail cars (my speciality)
I'm a college student home for the summer, might work for just food. There are probably a couple things not on the list I can do too, so just ask!
-Cyrus
CAI, Y Pipe, MEVI, Exaust, Springs, Struts/Shocks, Bars, Superchargers, Turbos, Lips, Side Skirts, Wings, Grills, STS, Gauges, E-Manage, J&S, Tune Ups and pretty much anything. Time to do the work is my biggest challange, shot me a PM or e-mail and we'll talk it over.
Springs, Struts, Brakes, Exhaust, Engine work, Anything Electrical, Metal polishing, Fabing custom parts metal/ fiberglass, welding, OEM/F1 style tire match-mounting and high speed balancing on my hunter GSP9700. ASE certified & SEMA Custom installer Certified
Send me a PM
Im near I-83 and 695
i work at Tops & Trends in raleigh nc and we do cosmetic stuff. personally i install sunroofs and video systems, and we also do leather interiors, spoilers, wood dash, body kits, keyless entry, remote start, etc.
aside from that i can help with most everything else.
I can do some things, major or not so major. List available upon request. I can do pretty much anything but its dependant on the weather(hot out?), if there is a garage to work in, how hard the job is, and help/compensation. I take all into major consideration before determining if I will do a job. I had my previous post removed because I couldn't edit it and I was getting a lot of work, more than I could handle.
all Stereo, Bose Conversions, basically everything electrical
Springs'shocks Intakes
Detail, used to manage a detail shop
Done exhaust systems too, but cant weld
other stuff can't think of now
Sorry if the typing looks retarded, still getting used to this tablet P.C.
oh yeah I Build Computers from Scratch too
I am an ASE certified non-Master Nissan tech. I can install any bolt-ons, do alignments, some SES light repairs, electrical work, etc. I only have limited experience with major engine/transmission repairs. PM if you're near Chicago's Northern 'burbs.
I can install lowering springs and struts/shocks (I have experience on 2nd,4th,5th, and 6th gen Maxima's)
I can install bolt on mod's, other than headers.
-motor mounts
-brakes (roters/pads)
-and other general maint.
My name is Bruce. I am located in the Columbia Maryland Area but will travel anywhere from NC to NY and all states in between. I have 8 years of experience working on modifing cars. I have worked in two small shops. I have experience in all major areas of repair from body work to interior work( Worked in a custom interior shop doing show cars) and most mehcanical work and audio work ( I owned my own install company for two years). I do not have welding equipment although I can weld. Wont do major engine work or tranny work. But I will do tranny replacements. Good rates and I want you there when I do the installs or work cause I like to teach people how to do your own work too.
If you need my help with a tune up or want me to do a full break job or anything else for the most part.
Shoot me an email at: chessieone@yahoo.com bruce.rice@jhuapl.edu
Or phone at: (cell) 410-807-5506
I live in WV and can do all kinds of random stuff- 4th/5th gen brakes, suspension (12-15 4th/5th gen installs), basic stereo work (100+ deck&4 installs, plus subs/amps etc.), rims & tires, cefiro headlight install, interior work, light installs, random maintainence.
I can also do 4th gen SE (white-faced) gauge swaps and keep your odometer accurate.
I work cheap. I also have air tools and most needed hand tools. I have references from org members.
I just moved from Orlando to Ashburn, VA (NOVA). I'm a 30 year vet to the Hampton Roads area before I started moving around for jobs. I used to be a Circuit City MECP certified installer. I don't install stereos much but I did hydros, syspension and electrical work back in the day to all my old rides. I'm 31, married with kids so I don't do it much anymore. I can build you a website now faster than I can install speakersa but I can still do it. I'd be interested in trading skils later though.
I live in Jessup, MD I've been installing car electronics for a little over a year. Im basic MECP certified. I do anything from a radio to remotestarter and full alarm systems. If you have any questions Just PM me. I dont have a problem helping anyone
located in harrisonburg. maxs and I can basically do everythign from vq35 swaps to auto to manual conversion to paint to buffing to electrical work to custom work. also havea huge selection of parts from parts car. if interested contact me or maxs.
98 Max:
Install starter, clean TB, change tires. Fuel filter, spark plugs, speakers front and back, side mirror replacement. Pretty much anything except major engine stuff and suspension or anything like that.
93 Max:
Replace fuel injectors. General Maint.
Best bet is to e-mail me, don't get on here much unless I need something: justinbleach@gmail.com
I can do suspension.
4th gen master (as well as NCSU_MAX and MAD_MAX-SE), 5th gen is almost the same.
I do professional detailing... I actually run a little small business in the spring/summer... I've kind of switched over to doing mainly motorcycles because there's more money in it... but i've been detailing cars for years now.
Mike
__________________
"If you're not selling something then somethings not right... You're always selling something."
Street Dreamz
27 Hampton Park Blvd
Capitol Heights, MD 20743
(301) 350-9401
Ask for ryan orCHUNIE
lol....
Chunie AKA MAXIMOUS!!!!!! I BEEz installin schtuff allz da tyme!!!
and i gotz my MECP SCHERTIFICATION...
no foreal i do mobile audio and video...also fiber glass....i ALL VEHICLES... i have been installing for around 7 years and have been certified since 2001
I have a part time shop in Hagerstown, MD. We can do pretty much anything but alot of things aren't worth doing. My partner is ASE certified master mechanic specializing in Daimler Chrylser/Mitsu/Hyandai 350Z/G35 worked as the head mechanic at altered atmosphere and a few other local tuner shops. I've dealt with toyota/Hondas mostly for the last 15 years. We can work on most vehicles although we try to avoid Ford's and most german engineered cars. Small shop working on a by appointment basis. Engine swaps, turbo kits, guages, fuel computers, exhaust, suspension, electrical, welding (only have mig right now tig coming soon). Can do audio, remotestarts, nav systems but honestly at the price that the audio or dealerships sell at we probably wouldn't be cheaper in that part but would do a better job. Basic mechanic work is $50/hour book time which is about half the average dealership rate in the area.
I have a part time shop in Hagerstown, MD. We can do pretty much anything but alot of things aren't worth doing. My partner is ASE certified master mechanic specializing in Daimler Chrylser/Mitsu/Hyandai 350Z/G35 worked as the head mechanic at altered atmosphere and a few other local tuner shops. I've dealt with toyota/Hondas mostly for the last 15 years. We can work on most vehicles although we try to avoid Ford's and most german engineered cars. Small shop working on a by appointment basis. Engine swaps, turbo kits, guages, fuel computers, exhaust, suspension, electrical, welding (only have mig right now tig coming soon). Can do audio, remotestarts, nav systems but honestly at the price that the audio or dealerships sell at we probably wouldn't be cheaper in that part but would do a better job. Basic mechanic work is $50/hour book time which is about half the average dealership rate in the area.
What is the name of your shop, and how do people contact you?
What is the name of your shop, and how do people contact you?
Well that's the bad part we now don't have a name cause we didn't know much about business licensing and trade marks but that's another story. Are name for a few years was Infinite Speed and Performance but unfortunately it wasn't trademarked and some "friends" of ours stole the name and are now located in College Park area working on vipers and evos even though they don't know what the hell they're doing. They said they were going to give the name back and never did. So now we still kinda use the name but I don't post it on the internet or anything untill we actually take some time and think of another one.
)
Check out my website:
There are probably a couple things not on the list I can do too, so just ask! 
Linear Mode
