Z32 MAF wiring.. WTF

[maxima92se]

Okay so I have a Z32 MAF i just got and I looked up the wiring for it and it shows The wires ABCDEF on them are completely different from what I have. Here is what I found... Posted by user name requin6(sp)

i didn't encounter the wiring schematic for someone looking to switch to a Z32 MAF in the stickies...maybe this is something that could be added.

on the Z32 (22680-30P00) ...

A (No wire) = not used
B (White) = A32 White (Signal Wire)
C (Black) = A32 Black (Ground)
D (Orange) = A32 Black (Ground)
E (Black/White) = A32 Red (Power)
F (No Wire) = not used

this is for a J30 MAF. i am not 100% that the wiring on a 300ZX MAF is the same. i don't see why it wouldn't be though.

if this is already posted somewhere then i apologize, but i didn't find it. just trying to help.

--Paul

Mine looks like this

A Orange wire
B white
C black with white dots...
D black
E white (thicker than all the wires present)
F No wire

How do I wire my Z32 MAF to the A32 Harness I just don't want to short anything on the car. And before you say something I already checked the stickies and everything everyone discusses the Z32 MAF and say they wired it right but how..

I will post up pics I have to be at work in 20mins. No time right now thanks.

[Flava_24/7]

Originally Posted by maxima92se

Okay so I have a Z32 MAF i just got and I looked up the wiring for it and it shows The wires ABCDEF on them are completely different from what I have. Here is what I found... Posted by user name requin6(sp)

i didn't encounter the wiring schematic for someone looking to switch to a Z32 MAF in the stickies...maybe this is something that could be added.

on the Z32 (22680-30P00) ...

A (No wire) = not used
B (White) = A32 White (Signal Wire)
C (Black) = A32 Black (Ground)
D (Orange) = A32 Black (Ground)
E (Black/White) = A32 Red (Power)
F (No Wire) = not used

this is for a J30 MAF. i am not 100% that the wiring on a 300ZX MAF is the same. i don't see why it wouldn't be though.

if this is already posted somewhere then i apologize, but i didn't find it. just trying to help.

--Paul

Mine looks like this

A Orange wire
B white
C black with white dots...
D black
E white (thicker than all the wires present)
F No wire

How do I wire my Z32 MAF to the A32 Harness I just don't want to short anything on the car. And before you say something I already checked the stickies and everything everyone discusses the Z32 MAF and say they wired it right but how..

I will post up pics I have to be at work in 20mins. No time right now thanks.

Originally Posted by iansw

I checked it a few times using the diagram from the JWT site.

on the Tomei Connector:
black/silver = signal - connected to A32 white/green
black=ground - connected to A32 black
brown=ground - connected to engine bolt
White=+!2v - connected to A32 Red

Dyno Analisis and Z32 MAF Questions

Taken from this thread...
Dyno Analisis and Z32 MAF Questions

http://jimwolftechnology.com/wolfpdf...%20NISSANS.PDF

[maxima92se]

Thanks Flav, So basically I am not looking at colors but Pi connections. I.e BCDE. It seems there are different variations of the Z32 connector with the wires in different spots etc. Thanks for the help BTW. I already had the JWT pdf file. Thanks though.