prjct-rmt-DEk

OK ive decided to go RMT as u can tell by my username.. im planning on using 2.5"cat back piping mandrel bent mated with a t3/t4 to4b .60a/r , .57 internally wastegated. im going with a smaller turbo due to the fact that im MT..2.5" hot side to TB with a HKS SSQV BOV. im using an AEM wideband and soon neo S-AFC..scavange pump in the trunk for oil to the turbo..im not looking for huge numbers i just want somemore power with the sweet sweet sound of turbo. please feel free to school me on any changes u might think will benefit my setup. im using stock injectors and maf..
thank you in advance for any of your advice..

ghostmax301

iTrader: (7)

tuff crowd.. good luck with the build

kzoosho

iTrader: (16)

If you are going to use the stock injectors get a FMU at least. I used the stock injectors and maf for a while but soon stepped up to a q45 maf and 550cc injectors.

t6378tp

iTrader: (69)

walbro 255 and a afpr with gauge