3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

trouble codes

Thread Tools
 
Search this Thread
 
Old 08-14-2002, 01:22 PM
  #1  
Newbie - Just Registered
Thread Starter
 
droger03's Avatar
 
Join Date: Aug 2002
Posts: 2
trouble codes

I am getting five red flashes and one green flash from my ecu when I enter diagnostic mode. The engine idles and drives reallly rough. I just replaced all six fuel injectors and that helped out a little. any help would be appriacted. thxs
droger03 is offline  
Old 08-14-2002, 01:59 PM
  #2  
Senior Member
 
92vemaxse's Avatar
 
Join Date: Jun 2002
Posts: 312
Re: trouble codes

Originally posted by droger03
I am getting five red flashes and one green flash from my ecu when I enter diagnostic mode. The engine idles and drives reallly rough. I just replaced all six fuel injectors and that helped out a little. any help would be appriacted. thxs
Did you put any sort of silicon grease or oil on the o-rings?? If you didn't, then one or more of the o-rings are probably broken. If this is the cause, expect to be in the garage for a couple hours to take them all out again.
Have fun
92vemaxse is offline  
Old 08-14-2002, 04:17 PM
  #3  
Senior Member
 
klymkow's Avatar
 
Join Date: Jun 2002
Posts: 187
Re: trouble codes

Originally posted by droger03
I am getting five red flashes and one green flash from my ecu when I enter diagnostic mode. The engine idles and drives reallly rough. I just replaced all six fuel injectors and that helped out a little. any help would be appriacted. thxs
Code 51 is for a faulty fuel injector circuit - for the California model - per the 90 factory manual. The check engine dash light should also be on.

Good luck,
Tim
klymkow is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxinout93
5th Generation Maxima (2000-2003)
14
10-31-2015 02:04 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM
dshinn
General Maxima Discussion
0
09-26-2015 08:07 PM
zmcneely13
4th Generation Maxima (1995-1999)
1
09-26-2015 02:26 PM



Quick Reply: trouble codes



All times are GMT -7. The time now is 05:52 PM.