black_maxed95

iTrader: (41)

Had to get some new bumper lights to better match my new r34 headlights...
still need to buy some white sidemarker bulbs but i wasnt gonna make a special trip to autozone just for that.

black_maxed95

iTrader: (41)

Jurassic Park Scene:























btw, all my bulbs are just cheap crap, no hids or silverstars or that nonsense. Just straight pure incandescence, thats how i roll

Dave H.

iTrader: (5)

Looks great! But you did use some kind of connector for those wires, didn't you? You didn't leave them like that?

David

black_maxed95

iTrader: (41)

Thanks! I put some electrical tape over the wires, no connectors

G4nismo

iTrader: (9)

electrical tape FTL!

i find them annoying, esp where its exposed to water

99grnmaxgxe

iTrader: (11)

Nice! Are those the APC bumper lights?

black_maxed95

iTrader: (41)

they were these off ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll...TODAY.m238.lVI

shyheim07

wahs me...looks good though!!

black_maxed95

iTrader: (41)

ya ya, its hard to keep clean, you see that muddy mess that I get to park on?

riceyasian86

Does your signal blinkers still work?
Did you just rewire with only the wires that are there already or add your own wires? I thought the blinkers were 1156 bulbs and not 1157.

black_maxed95

iTrader: (41)

Ya my blinkers still work. That bulb and socket is from a tail light harness which use 1157 bulbs. What you do is you connect the ground and 'high beam' part of the socket to the old blinker wires. Then connect the 'low beam' part to the side markers. That way the whole thing is lit during normal driving, then when you turn, the high beam part blinks and is still noticable. There is a write up on vqpower.com but my first picture basically sums up the entire write up.