All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.

Osiris from UpRev

Thread Tools
 
Search this Thread
 
Old 01-22-2008, 04:25 PM
  #1  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
Osiris from UpRev

http://www.my350z.com/forum/showthread.php?t=279548

http://uprev.com/products/osiris_NI.html

* http://forums.maxima.org/showthread....ghlight=osiris *

The "ultimate" tuning device.

I have sent countless e-mails to them, and a few others have sparked some interest as well.

Let's start a list of people interested.

EDIT: Forgot to say that the 5th gen has a different ECU than the 6th gen/350z/G35

6th gen
1.) !prjctmax!
2.) shawndon
3.) redls1
4.) anm6

5.5 gen
1.) VqMoNsTeR
2.) nismology

Last edited by !PrjctMax!; 01-23-2008 at 06:33 PM.
!PrjctMax! is offline  
Old 01-22-2008, 04:38 PM
  #2  
Senior Member
iTrader: (10)
 
VqMoNsTeR's Avatar
 
Join Date: Jun 2006
Location: Upper Marlboro MD
Posts: 1,030
1.) !prjctmax!
2.) VqMoNsTeR
VqMoNsTeR is offline  
Old 01-22-2008, 08:16 PM
  #3  
DasYears
Guest
 
Posts: n/a
sounds like you need to make a seperate list for 6th/5th gen
 
Old 01-22-2008, 08:20 PM
  #4  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
Still an interest none the less, so it should spark more of an interest for UpRev to actually start offering the program to the "Maxima" crowd.

edited OP
!PrjctMax! is offline  
Old 01-22-2008, 08:36 PM
  #5  
Senior Member
iTrader: (10)
 
VqMoNsTeR's Avatar
 
Join Date: Jun 2006
Location: Upper Marlboro MD
Posts: 1,030
Originally Posted by !PrjctMax!
http://www.my350z.com/forum/showthread.php?t=279548

http://uprev.com/products/osiris_NI.html

The "ultimate" tuning device.

I have sent countless e-mails to them, and a few others have sparked some interest as well.

Let's start a list of people interested.

EDIT: Forgot to say that the 5th gen has a different ECU than the 6th gen/350z/G35

6th gen
1.) !prjctmax!

5.5 gen
1.) VqMoNsTeR
Edit: Error no 3.0 found
VqMoNsTeR is offline  
Old 01-22-2008, 09:44 PM
  #6  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
****...my bad
!PrjctMax! is offline  
Old 01-22-2008, 10:18 PM
  #7  
DasYears
Guest
 
Posts: n/a
thats ok, theres no potential from the 3.0 anyway
 
Old 01-22-2008, 10:32 PM
  #8  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
^hey now...let's keep this thread clean and on topic pleaz!
!PrjctMax! is offline  
Old 01-23-2008, 05:50 AM
  #9  
Senior Member
iTrader: (2)
 
anm6's Avatar
 
Join Date: Nov 2007
Location: Boston MA
Posts: 581
Definitly interested in a flash for our cars. 06 Maxima SE
Auto.
anm6 is offline  
Old 01-23-2008, 05:57 AM
  #10  
Senior Member
iTrader: (2)
 
shawndon's Avatar
 
Join Date: Sep 2006
Posts: 412
If it's the fully tunable version, I'm interested as well. That's supposed to be released here soon.
shawndon is offline  
Old 01-23-2008, 06:06 AM
  #11  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
Many of us 5.5gen members have tried to get their attention, they wont listen. Maybe there is more hope for the 6 th gen guys since your software packages are very similar.
NmexMAX is offline  
Old 01-23-2008, 07:29 AM
  #12  
Member
 
kronickz's Avatar
 
Join Date: Aug 2007
Posts: 289
Will this work to tune our cars with turbos?
kronickz is offline  
Old 01-23-2008, 07:34 AM
  #13  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
Originally Posted by kronickz
Will this work to tune our cars with turbos?
Do you know what 'tuning with turbo' entails? If so, then read the link and see if the parameters that are desired when 'tuning turbos' are mentioned & modifiable.
NmexMAX is offline  
Old 01-23-2008, 08:38 AM
  #14  
Supporting Maxima.org Member
iTrader: (6)
 
hacim105's Avatar
 
Join Date: Jul 2002
Location: Reno, NV
Posts: 2,063
Just out of curiosity, why don't you guys try using the Emanage Ultimate & Vmanage?
hacim105 is offline  
Old 01-23-2008, 09:32 AM
  #15  
Supporting Maxima.org Member
iTrader: (8)
 
nismology's Avatar
 
Join Date: Apr 2003
Location: Miami, FL
Posts: 9,116
^^EU + VQ35 ECU's don't mix so well. Erratic timing readings, burned coils, etc.





I don't see any mention of changing the cam timing on uprev's site. Guess TS F-spec is still the only cost-effective option for that.
nismology is offline  
Old 01-23-2008, 09:40 AM
  #16  
I'm needing a caw
iTrader: (82)
 
Jeff92se's Avatar
 
Join Date: Aug 2000
Posts: 34,147
Church's dyno in Ca has had great success with the Osris reflashes. They mentioned redoing someo of the cam timing curves to get more power. From what I've read, they have got decent gains ON TOP of gains done by TS.
Jeff92se is offline  
Old 01-23-2008, 09:55 AM
  #17  
Supporting Maxima.org Member
iTrader: (8)
 
nismology's Avatar
 
Join Date: Apr 2003
Location: Miami, FL
Posts: 9,116
If that's the case I'm pretty much sold. That was the only hangup.
nismology is offline  
Old 01-23-2008, 10:05 AM
  #18  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
Originally Posted by Jeff92se
Church's dyno in Ca has had great success with the Osris reflashes. They mentioned redoing someo of the cam timing curves to get more power. From what I've read, they have got decent gains ON TOP of gains done by TS.
That's good to know since I also have the TS full-spec flash... on wasting roughly $900 for it...long story
_______

Once money levels out, and I have all of my other priorities dealt with, I will probably take a "chance" with the program myself and see if it will work. I don't really see why it wouldn't since the programs are all pretty much the "same" and are used with the Titan, G35, 350Z, and SE-R...so why not the 6th gen?
!PrjctMax! is offline  
Old 01-23-2008, 10:13 AM
  #19  
I'm needing a caw
iTrader: (82)
 
Jeff92se's Avatar
 
Join Date: Aug 2000
Posts: 34,147
Originally Posted by nismology
If that's the case I'm pretty much sold. That was the only hangup.
Well you have to actually be at their facility. I'm not sure if you can ask UpRev to do an email reflash that has altered cam timing. Or find someone near you that's an UpRev dealer and is pretty experienced with dyno tuning the VQ35
Jeff92se is offline  
Old 01-23-2008, 06:02 PM
  #20  
MAXIN' ON
iTrader: (2)
 
redls1's Avatar
 
Join Date: Jul 2007
Location: TN
Posts: 1,310
Guy over at another site said

uprev does a great job tuneing for the nissan product.They will tune for are cars but need a test car from the Austin Texas area to get on there Dyno.They tuned my Titan and I gained almost 8 tenths 0 to 60 and about the same in the 1/4.After they have a tune all you have to do is mail in your ecu and your good to go.there prices are not bad either.Check out uprev .com

Guess it was only that easy. I asked if he really talked to someone and am waiting on an answer.
redls1 is offline  
Old 01-23-2008, 06:21 PM
  #21  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
^post responses here when you get them
___________

Updated OP with a link from previous interest

Last edited by !PrjctMax!; 01-23-2008 at 06:29 PM.
!PrjctMax! is offline  
Old 01-23-2008, 08:04 PM
  #22  
DasYears
Guest
 
Posts: n/a
i would be super interested if it didnt cost so much. i would need a lot more than just a flash for 700. would need tuneability
 
Old 01-23-2008, 09:25 PM
  #23  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
^Which from what I've been reading should be available soon.
!PrjctMax! is offline  
Old 01-23-2008, 09:32 PM
  #24  
I'm needing a caw
iTrader: (82)
 
Jeff92se's Avatar
 
Join Date: Aug 2000
Posts: 34,147
1) You don't have to mail in the ecu. You email THEM the data log and Uprev emails you a new flash. You then upload the new file into your ecu.
2) Tunability. See 1) There's talk about end user tunability but that's in the future. For now, it's a dealer only option.
3) It's NOT just a flash. You get the cipher OBDII diagnostics with it.

You guys need to go to UpRev's site and read.
Jeff92se is offline  
Old 01-23-2008, 09:36 PM
  #25  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
!PrjctMax! is offline  
Old 01-23-2008, 09:51 PM
  #26  
fast2002
Guest
 
Posts: n/a
i guess for $400 of diagnostic equip, its only a $300 flash and thats not TOO bad. once in the future its tuneable that will be a deal
 
Old 01-23-2008, 10:57 PM
  #27  
Senior Member
iTrader: (2)
 
Outlawd's Avatar
 
Join Date: Oct 2006
Posts: 287
This is pretty cool - I would really consider this but Houston has a really bad *** tuner dude which I want to see what he can push out of my max. I'm just waiting a few things to come in and cattman's headers.
Outlawd is offline  
Old 01-24-2008, 04:15 AM
  #28  
Senior Member
iTrader: (2)
 
shawndon's Avatar
 
Join Date: Sep 2006
Posts: 412
Originally Posted by Outlawd
This is pretty cool - I would really consider this but Houston has a really bad *** tuner dude which I want to see what he can push out of my max. I'm just waiting a few things to come in and cattman's headers.

Uprev is looking for a maxima to test on. Since you live in Texas would you be willing?? Uprev is in Texas.
shawndon is offline  
Old 01-24-2008, 08:28 AM
  #29  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
Originally Posted by Outlawd
This is pretty cool - I would really consider this but Houston has a really bad *** tuner dude which I want to see what he can push out of my max. I'm just waiting a few things to come in and cattman's headers.
I'm with you on getting the bolt-ons first...

Originally Posted by shawndon
Uprev is looking for a maxima to test on. Since you live in Texas would you be willing?? Uprev is in Texas.
... !!!!
!PrjctMax! is offline  
Old 05-31-2008, 06:07 PM
  #30  
Junior Member
iTrader: (1)
 
*Jay*'s Avatar
 
Join Date: Mar 2008
Posts: 21
What bandwagon would a 2002 Altima 3.5SE guy need to jump on??? Let me know and count me in. I can drop a dime on nissanclub.com to get some more interested if it hasnt happened yet.
*Jay* is offline  
Old 06-01-2008, 10:15 PM
  #31  
Senior Member
iTrader: (45)
 
NiZMo1o1's Avatar
 
Join Date: Nov 2002
Location: Florida /Wade County !
Posts: 4,246
few months late but any updates ?
NiZMo1o1 is offline  
Old 07-25-2008, 08:02 PM
  #32  
Senior Member
Thread Starter
iTrader: (38)
 
!PrjctMax!'s Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 5,238
...Deus used it in his car...

http://www.6thgenmaxima.org/forums/viewtopic.php?t=3436
!PrjctMax! is offline  
Old 07-25-2008, 09:45 PM
  #33  
Senior Member
iTrader: (45)
 
NiZMo1o1's Avatar
 
Join Date: Nov 2002
Location: Florida /Wade County !
Posts: 4,246
Originally Posted by !PrjctMax!
Yeah but I hit up UpRev at My350z and they said they never dealt with the A34..

So unless Dues took a chances and purchase it for the Z , its still under the radar
NiZMo1o1 is offline  
Old 07-29-2008, 09:06 AM
  #34  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
That site is blocked, but can we establish a difference. Did Dues use Osirus or Cipher.
NmexMAX is offline  
Old 07-29-2008, 09:36 AM
  #35  
Senior Member
 
sunstream453's Avatar
 
Join Date: Apr 2008
Posts: 213
Originally Posted by DeusExMaxima
They offer it now cuz I used it. Its great for sensor read out and for data logging. I also advanced my timing 2 degrees. Its also kinda fun to honk ur horn, turn ur lights on and off and other things just by pressing buttons on ur laptop.
sounds like cipher to me. IMO, uprev is too bigheaded to offer to the maximas, just my opinion from what ive seen on my350
sunstream453 is offline  
Old 07-29-2008, 09:55 AM
  #36  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
Someone from the A34 crowd should try it and see. Couldn't be too difficult to sell if it doesn't work.
NmexMAX is offline  
Old 07-29-2008, 10:05 AM
  #37  
Senior Member
 
sunstream453's Avatar
 
Join Date: Apr 2008
Posts: 213
yeah, i think if you just told em you had a z (A34 people only obviously) and sent them the logs they would send you back your tune and nobody would be the wiser
sunstream453 is offline  
Old 10-14-2008, 08:56 AM
  #38  
Member
 
VQpwrdSpeC's Avatar
 
Join Date: Jul 2007
Location: West Palm Beach
Posts: 73
any updates with this? I kind of have a 2002 maxima and im looking to tune this thing
VQpwrdSpeC is offline  
Old 02-16-2009, 03:50 PM
  #39  
Senior Member
iTrader: (7)
 
tonedef's Avatar
 
Join Date: Nov 2008
Location: Corpus Christi
Posts: 569
05 Altima SER owner here in Corpus Christi Texas

just spoke with Richard at uprev, i am now selling my Utec and should be the first Altima to utilize their capabilities.

After I sell my Utec I will be taking my car down there and leaving it for a week.

Stay Tuned
tonedef is offline  
Old 02-16-2009, 04:53 PM
  #40  
Senior Member
iTrader: (7)
 
tonedef's Avatar
 
Join Date: Nov 2008
Location: Corpus Christi
Posts: 569
bump for those interested
tonedef is offline  


Quick Reply: Osiris from UpRev



All times are GMT -7. The time now is 10:44 AM.