nismax96

I have a JL pro wedge box with 2 10wo's. Each sub has 125 watts of power. Since its a wedge box I believe it is set at 2 ohms. My budget is at $200-$250. What amps do you guys recommend?

mendon99

iTrader: (15)

? the box has nothing to do with resistance. iirc the 10w0 is either 4 or 8 ohm, SVC.

nismax96

If it's set at 4 ohms what kind of amp would you suggest? Mono or 2-channel?

mendon99

iTrader: (15)

either, whichever amp you like better. both would work.. take a look at this, it should help you.

http://mobile.jlaudio.com/support_pages.php?page_id=160

nismos14

iTrader: (56)

... lol......... mono amp but first test the resistance on the input.

nismax96

Thanks for the link.
The subs I have are discontinued so I'm not sure if they are 4 or 8 ohms. But I think I should be able to find an affordable amp for this box.

mendon99

iTrader: (15)

attach a multimeter to the coil, should tell you

nismos14

iTrader: (56)

Just because the subs are discontinued doesn't mean that information is unavailable. AGAIN test them with a MM.

KyMan

iTrader: (2)

Won't the subs say what they are on the back of the speaker? Not sure about your specific model, but look at the back of the sub and it will either tell the you impedence or it will tell you the model # which will tell you the impedence....if you don't want to just use the multimeter.

nismax96

The subs are already in the box so I will have to use the MM.
I have been looking at the alpine and rockford fosgate amps. What do you think about those?

nismos14

iTrader: (56)

Just pop one out of the box then see what the resistance is on it. I would go with alpine over RF.

mendon99

iTrader: (15)

big +1 there.

nismax96

Thanks for the info guys.