Warpspeed CAI
#5
Its not a all day job mine took me about 2 1/2 hours.
If you have a plasma cutter it will speed things up and give you a nice hole. If not then use a jig saw and make sure you have alot of blades, or just use a hole punch like me and puch alot of holes and knock it out with a hammer and use a file to smooth it out! Besides you can print out instructions from warpspeeds site that will walk you right through the whole ordeal!
If you have a plasma cutter it will speed things up and give you a nice hole. If not then use a jig saw and make sure you have alot of blades, or just use a hole punch like me and puch alot of holes and knock it out with a hammer and use a file to smooth it out! Besides you can print out instructions from warpspeeds site that will walk you right through the whole ordeal!
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
lrb6805
4th Generation Maxima (1995-1999)
7
09-17-2015 04:49 PM
A32goldylocks
4th Generation Maxima (1995-1999)
8
09-16-2015 01:33 PM