pictures of my turbo build
#1
Guest
Posts: n/a
pictures of my turbo build
I'll be adding more info and pictures as time goes on.
#8
Guest
Posts: n/a
when I ordered the piping kit I completely forgot about the color of the couplers. Im going to trade my blue couplers to my friend that is going to turbo his civic he has a set of red ones and he wants my blue ones so that works out perfect.
#19
Guest
Posts: n/a
greddy bov flange
walbro 255 hp fuel pump
oil drain fitting
3" exhaust cut out
alcohol injection
walbro 255 hp fuel pump
oil drain fitting
3" exhaust cut out
alcohol injection
#20
Guest
Posts: n/a
megan racing muffler 3" inlet and 4" outlet
8 3 ply silicone turbo couplers
16 t bolt clamps
t3/t4 t04e turbo
8 3 ply silicone turbo couplers
16 t bolt clamps
t3/t4 t04e turbo
#21
Guest
Posts: n/a
2.5" aluminum piping
2 90 degree bends
2 45 degree bends
2 180 degree bends
2 straight pipes
#36
shouldn't some of that stuff be in the car before even installing a IC
Mmmm like the fuel pump and exhuast, you were running nitrous before right
and where is the charge pipe and down pipe not going to get to far without that
Mmmm like the fuel pump and exhuast, you were running nitrous before right
and where is the charge pipe and down pipe not going to get to far without that
#40
so you installed a ic and nothing else
how can you mock up the ic piping without knowing where the turbo will be at. guessing this is not your daily driver cause it would be easier to just wait till you have all the parts before you start this project
how can you mock up the ic piping without knowing where the turbo will be at. guessing this is not your daily driver cause it would be easier to just wait till you have all the parts before you start this project