Radiator Cooling Panels
05-02-2006, 10:25 AM
#1
CF Radiator Cooling Panels
SOLD OUT!!!!!!!!!!!!!!!!!!
I need to get rid of some old stock. I purchased these from a company that has gone out of business. I will however consider getting them produced again if there is interest (since I have the template)
Carbon Fiber Radiator Cooling Panels for 1997-1999 Maxima ONLY. This will also fit those with a 97+ front conversion. The product will aid in providing more cooling to your radiator because the air will be concentrated in that region instead of blowing upwards. It will also add a nice cosmetic appearance to your engine bay.
$45 dollars shipped. Payment via paypal to larriomotors@yahoo.com
The package will come with 1 pre-drilled radiator shroud and plastic push clips. All you have to do is center the cooling panel with the hood latch, and mark the 5 holes. Then use a 7/32 drill bit to make the holes, and push in the included clips.
I need to get rid of some old stock. I purchased these from a company that has gone out of business. I will however consider getting them produced again if there is interest (since I have the template)
Carbon Fiber Radiator Cooling Panels for 1997-1999 Maxima ONLY. This will also fit those with a 97+ front conversion. The product will aid in providing more cooling to your radiator because the air will be concentrated in that region instead of blowing upwards. It will also add a nice cosmetic appearance to your engine bay.
$45 dollars shipped. Payment via paypal to larriomotors@yahoo.com
The package will come with 1 pre-drilled radiator shroud and plastic push clips. All you have to do is center the cooling panel with the hood latch, and mark the 5 holes. Then use a 7/32 drill bit to make the holes, and push in the included clips.
05-02-2006, 01:57 PM
#14
Originally Posted by The Wizard
You're getting closer... Have any closeups? Thanks in advance.
Are you going to Stillen day by chance? Maybe I could pay and pick it up then?
Are you going to Stillen day by chance? Maybe I could pay and pick it up then?
KabirUTA13: I am still working on the piece for my vehicle. It is still in the works because its not just a simple flat piece
TJ_Max: payment received, thank you sir. Product should be shipping tomorrow morning.
05-02-2006, 02:03 PM
#15
Thanks. BTW, this is a fancy little nickname you gave em. They were just called radiator shrouds now. LOL. I like "cooling panels" better. Even though they really don't help cool anything. Or am I mistaken in some weird way? LOL.
no homo lol
05-02-2006, 02:08 PM
#17
Originally Posted by Larrio Motors
I don't have a camera on me, will need more time. I will be at the U.S. Sport Car invitational (Laguna Seca Raceway) to support a sponsored car during Stillen Day, so I cannot make it. We can always make arrangements for pick up if you are in town. If I ship it, it will probably reach you by Friday
Tell me this, does the weave go in the same direction as spark plug cover? How well does it match the spark plug cover? Nice clearcoat I assume?
05-02-2006, 02:14 PM
#18
Originally Posted by The Wizard
Cool. There's a Nissan car show on Sunday that I'm attending. It would be nice to have this by then Tell me this, does the weave go in the same direction as spark plug cover? How well does it match the spark plug cover? Nice clearcoat I assume?
Tell me this, does the weave go in the same direction as spark plug cover? How well does it match the spark plug cover? Nice clearcoat I assume?
05-02-2006, 02:14 PM
#19
Originally Posted by TJ_Max
Thanks. BTW, this is a fancy little nickname you gave em. They were just called radiator shrouds now. LOL. I like "cooling panels" better. Even though they really don't help cool anything. Or am I mistaken in some weird way? LOL.
Of course they help cooling. Just because it is an immeasurable quantity doesn't mean it isn't working.
But in all serious-ness, the OBD-II shows that the coolant temperature is lower with the shroud.EDIT:
Mr. Wizard: I believe there is no clearcoat on the piece. It was a properly made piece of carbon fiber produced from a high quality mold. Your engine cover looks like a twill weave (diagonal), whereas this is a plain weave (straight). I doubt most people would notice the difference. Also, your engine cover looks to be coated in a heavy layer of clearcoat... so I don't think the difference would be apparent
05-02-2006, 02:24 PM
#21
Originally Posted by TJ_Max
Ha, who would have thought. I'll chalk this up as a performance mod than. LOL.
05-02-2006, 02:34 PM
#23
Originally Posted by The Wizard
Alright, cool Larry. Thanks for answering all my q's. I'll give it a shot. Payment coming your way!!
Thank you, It will ship tomorrow
05-03-2006, 09:20 AM
#28
Originally Posted by Larrio Motors
From a marketing stand point, you should. Btw, I'm interested in one of your products. Any chance of purchasing a few at a bulk price? Are you the owner of the site?
. Let me know which product, may be able to relay the info or get you guys to talk about it.
05-03-2006, 10:23 AM
#29
Originally Posted by NOCturnalI30
Will This Fit On A 2000 I30/i35???????????? I Will Pay Asap!!!
TJ_Max: i'll PM you about the product once I source funds.
ACEEMaxima: still plenty left
1st post updated for install instructions
05-04-2006, 12:54 PM
#37
Originally Posted by mindlessoath
i may be looking to get one of these in the future. if you are going to make any of these in the next two months or so, leme know, cause i should could use one then.
