Maxima Forums

 
Page 1 of 4
1
2
3
Last »
Search: Posts Made By: gen1
Showing results 1 to 25 of 87
Search took 0.11 seconds.
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
10-13-2017, 06:03 PM
Replies: 24
Views: 2,119
Posted By gen1

Note if the EGR system is similar to the first...

Note if the EGR system is similar to the first generation - there was a separate channel in the base of the intake manifold, which would collect all the unburned hydrocarbons/oil/carbon.
There are...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
04-06-2017, 05:03 PM
Replies: 7
Views: 1,493
Posted By gen1

Check the simple stuff first! Radiator cap...

Check the simple stuff first!

Radiator cap rubber seal should have NO visible cracks.

Symptom of temperature correct when continuously driving, trending higher in stop and go traffic suggests...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
03-03-2017, 07:38 PM
Replies: 7
Views: 1,493
Posted By gen1

1. pressure test the cooling system, it may be...

1. pressure test the cooling system, it may be that the radiator cap is leaking or other leaks
2. when did you last replace the thermostat. If its sort of sticky, but not quite .., turning on the AC...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
08-13-2015, 04:33 PM
Replies: 9
Views: 3,796
Posted By gen1

The reason being The first gen Maxima is a...

The reason being

The first gen Maxima is a real car. Subsequent generations are all the same, tail-draggers.
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
05-12-2015, 11:22 AM
Replies: 5
Views: 1,842
Posted By gen1

Yes. The stock L24E block has the cylinders...

Yes. The stock L24E block has the cylinders notched on the exhaust valve side of each cylinder. Uses a maxima version of the N47 head.

Check the cylinder bore in the specs compared to stock L28. I...
Forum: General Maxima Discussion
05-12-2015, 11:05 AM
Replies: 1
Views: 1,077
Posted By gen1

I'm in the process of replacing the head gasket...

I'm in the process of replacing the head gasket in my '84 maxima and was just looking at that on the weekend.

The L24 block is actually notched on the exhaust valve side of each cylinder.
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
10-15-2014, 11:10 AM
Replies: 10
Views: 1,967
Posted By gen1

Looks like the FPR is not connected correctly!

Looks like the FPR is not connected correctly!
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
09-15-2014, 09:20 AM
Replies: 6
Views: 1,470
Posted By gen1

Sorry! No digital imaging devices.

Sorry!
No digital imaging devices.
Forum: 4th Generation Maxima (1995-1999)
09-11-2014, 04:46 PM
Replies: 96
Views: 12,048
Posted By gen1

Check fuel pressure regulator. Pull the vacuum...

Check fuel pressure regulator.
Pull the vacuum line off and check to see if gas is leaking through the diaphragm.
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
09-11-2014, 12:42 PM
Replies: 6
Views: 1,470
Posted By gen1

And now for injectors

I've had the head off for some time now, and am getting ready to start putting things back together.

Question now

"Is there an approved sealant/cement for sealing the injector tip seals into...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
07-18-2014, 12:14 PM
Replies: 6
Views: 1,470
Posted By gen1

head gasket replacement assistance

I suspect that my current troubles with the car are due to a blown head gasket. Discoloration (rusty red color of coolant) in the cam gallery around the #2; #3 exhaust valves. Start; run; stall with...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
07-02-2014, 08:06 AM
Replies: 44
Views: 5,347
Posted By gen1

Saw a nice 4 liter Jag six, circa 1990, that...

Saw a nice 4 liter Jag six, circa 1990, that would more than likely fit.
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
06-30-2014, 04:36 PM
Replies: 44
Views: 5,347
Posted By gen1

Nice '84. They are becoming collectors...

Nice '84.

They are becoming collectors items.

Good luck finding the center hub caps (aluminized plastic)

At about 114k I replaced the water pump and had the radiator re-cored.

Check rear...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
06-09-2014, 06:44 AM
Replies: 0
Views: 1,225
Posted By gen1

Cold start valve help

Does anyone out there have a spare or surplus functioning cold start valve for first generation Maxima?

Thanks
Bob
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
05-20-2014, 06:13 PM
Replies: 190
Views: 18,236
Posted By gen1

Ed: There's something missing from your...

Ed:

There's something missing from your photos of the new ride.

I want to see the giant shoehorn you used to get all of that engine into the 510!

-bob
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
05-16-2014, 07:17 PM
Replies: 1
Views: 1,031
Posted By gen1

If anybody is interested, I managed to fluke off...

If anybody is interested, I managed to fluke off a replacement IATS.

I had purchased an airbox and MAF from a 1995 Maxima several years ago.

The IATS in the 1995 was located on the right side...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
05-14-2014, 10:23 AM
Replies: 1
Views: 1,031
Posted By gen1

Specifications for 1st gen intake air temperature sensor

My 1984 Maxima started running extremely rich after replacing the fuel pressure regulator.

On testing the intake air temperature sensor in the MAF, I found that the resistance increased with...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
04-08-2014, 09:52 AM
Replies: 7
Views: 1,307
Posted By gen1

I had similar problem with my 1984 Maxima. ...

I had similar problem with my 1984 Maxima.

It turned out to be the cold start injector was not turning off.

Start your car, the cold start injector should turn off after about 30 seconds.

If...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
01-08-2014, 07:19 PM
Replies: 9
Views: 2,537
Posted By gen1

Some minor repairs?

Derek:
Very nice work!

What if any modifications are you making to the rear suspension?

The transmission and differential in the Maxima were the same as the naturally aspirated 280z of the...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
08-07-2013, 03:26 PM
Replies: 167
Views: 18,228
Posted By gen1

I'd drive my '84 down from Calgary, except that...

I'd drive my '84 down from Calgary, except that I'm in the process of replacing all four corners springs and shocks after 160k miles. Edmonton had the worlds worst potholes this April, hence the...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
07-16-2013, 05:48 PM
Replies: 6
Views: 1,623
Posted By gen1

The injectors are tied to the +12 volt rail...

The injectors are tied to the +12 volt rail through one lead. The opposite lead, from the computer applies a ground signal to fire the injectors.

Use a noid light to verify that you are in fact...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
04-10-2013, 05:40 PM
Replies: 5
Views: 1,108
Posted By gen1

Bad IDEA !! Water going into the AFM could...

Bad IDEA !!
Water going into the AFM could damage the anemometer wire.


Check to see if the thermotime switch is functioning correctly. You may be getting excess fuel from the cold start valve...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
12-07-2011, 10:51 AM
Replies: 6
Views: 1,753
Posted By gen1

Please message me your email particulars and I'll...

Please message me your email particulars and I'll fire off a PDF file of the basic wiring info for the ignition, starting, charging, and lighting systems. (it's about 22 MB)

Since you are...
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
12-06-2011, 02:21 PM
Replies: 6
Views: 1,753
Posted By gen1

Have FSM, but actual bible may be of greater utility

I've been PO'd with my 84 on numerous occasions, but never resorted to disembowelling the electrical system!

What prompted such extensive disassembly?

I'll try to get something to you tomorrow....
Forum: 1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
07-29-2011, 06:07 PM
Replies: 6
Views: 2,075
Posted By gen1

Hi Chris: Interested in the 84 Max...

Hi Chris:


Interested in the 84 Max manual.

No PayPal ability here, but if you e-mail me correct particulars i can get a UPS or bank money-order.

-regards
bob
Showing results 1 to 25 of 87
 
Page 1 of 4
1
2
3
Last »


 
Forum Jump


All times are GMT -7. The time now is 09:04 PM.