 |
|
09-05-2008, 03:32 PM
|
#1
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Dyno meet
The nissan that puts down the most power will not have to pay for there three runs 
When:
10/11/2008
Where:
Performance Automotive in Plymouth, Ma
Adress is: 45 South Street Plymouth, MA 02360
Parking: Is very limited, part of the reasons for appointments also, here is a picture. If and when these fill up there is also parking on the side of the building where this picture was taken from, but PLEASE PLEASE PLEASE do not block in the tow-lot out back. 
How much:
$75 = up to 3 runs
$125= 3-5 runs w/tuning (If you have anything other than an afc please pm me in advance)
Any questions feel free to call my cell, also if anybody wants to dyno sooner feel free to give me a call, as I am working in collaboration with performance automotive and renting the dyno on a monthly basis.
Hey what's up everybody,
The meet is going to be from 9:00-3:00 pm, the dyno place kinda switched things up on my a little bit and is hesitant about having lots of unknown people hanging out togethor in a shop with lots of expensive and dangerous equipment and cars around. It makes sense though. However it will still be very chilaxed and as long as it's just my buddy Ben there for most of the day I wouldn't worry about it. However, I am going to do two things because of this, well actually three.
1: It's going to be by rough appointment only, please pm me with a time that is convenient for you, as well as the best way to contact you.
2: If there gets to be to many people around the shop, everybody has 3 options. Go home, go down to the waterfront in plymouth and have a good time, or go and hang out back at my shop in Middleboro, there will be beer and sodas there, just don't steal anything,. f anything up, or get yourself hurt.
3: SAFETY. I really don'y have to say to much about this, because we will be keeping an eye on things anyways, but just a heads up: The most dangerous place to be is anywhere within the vicinity of the long straps. While dyno'ing a FWD car this will be at the far back wall of the shop to the rear of the vehicle.
So at this point, I need to try to get a rough schedule of who will be coming and give them times. If you could please pm me the best time between 9-3 that you can come, as well as the best way to contact you that would be awesome. BostonA33 and blk200maxise, I know you guys are bringing freinds as well, much appreciated on spreading the word, and I will remember that when booking everything out, also ,. if the turnout is large enough I will probably be giving discounted runs to those people who brought a freind.
__________________
PM or call 774-766-7462 for SSIMS.
3-bay garage in Massachusetts servicing all your maxima needs
Last edited by KRRZ350; 10-09-2008 at 07:06 AM.
|
|
|
|
09-05-2008, 05:51 PM
|
#2
|
|
Resident Mass. Brownie
Join Date: May 2005
Location: Malden, MA
Posts: 1,840
|
What the crap is this? A week after the NWP meet? Dude, I'll be reluctant to spend more money on the car again that soon. I'll probably be in though... What time? Where is this place in Plymouth? More info foo!
__________________
2002 Super Black SE 6-Speed (Best 1/4 Time: 14.639 @ 96.58 mph)
| Berk Intake w/ APEXi | APEXi WS2 | 17 BTDC | Eibachs/Tokico Illuminas 3F/4R | Progress RSB | ES MMs and Bushings | CE FSTB | H&R 15mm Rear Spacers | RTP Slotted Rotors | Axxis Metal Master Pads | SS Lines | 6,000ks D2Rs and H3s | Dark-V LED Lighting | VIS OEM CF Hood | 235/45-17 General Exclaim UHPs | G35C Seats | SSIM
|
|
|
|
|
09-05-2008, 06:30 PM
|
#3
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Quote:
Originally Posted by zero2sixtyZ
What the crap is this? A week after the NWP meet? Dude, I'll be reluctant to spend more money on the car again that soon. I'll probably be in though... What time? Where is this place in Plymouth? More info foo!
|
You know what, I was debating pushing it back to 2 weeks after the nwp meet because I thought that might be a concern and limit turnout, so I'm changing the date, plus that will give you plenty of time to get some headers 
I think the address is 45 south st, but don't quote me on that, basically it's my new home away from home (just replace home with garage), Ummmm, it's a dynojet, and starting in a few weeks I'll be renting it out monthly as well as becoming a sponsor over on My350Z and I'm exploring my dealer options with Utec & CobbAccessport as well.
Last edited by KRRZ350; 09-05-2008 at 06:34 PM.
|
|
|
|
|
09-05-2008, 11:11 PM
|
#4
|
|
Supporting Maxima.org Member
Join Date: Feb 2005
Posts: 578
|
You are getting too busy Kev.. I still need a transmission but i need the money to get one. LOL. anyway i will try and make it in so you can drive the busted up vehicle and give me some quotes. I like the LSD tranny but the price right now is out ma range. But I will show some support and make an effort to attend.
__________________
98 Nissan Maxima..
Mods..
Supercharged, FMIC, K&N CAI, 00VI, VAFCII, Short Ram intake, Budget Y, warpspeed high flow cat, Greddy SP2 Catback, dropped!!
Zeitronix wideband and datalogging laptop just for tuning 
18x8 G35 rims wrapped in Dunlop W10 235/40/18 tires.
Z32 4piston calipers, Cobra Xdrilled/Slotted.
14lbs Super Charged Sleeper@332fwhp 
SOON: RC440cc injectors, Transmission, clutch and headers!!
|
|
|
|
|
09-06-2008, 05:58 AM
|
#5
|
|
Supporting Maxima.org Member
Join Date: Apr 2006
Location: Sandwich, MA
Posts: 260
|
Finally something close by. This is a 15 minute drive from my house. I might use this as an opportunity to get a baseline dyno before I get the turbo installed in the next few months. By the way, the guys at Performance build some crazy mustangs and I've always heard good things about them.
|
|
|
|
|
09-06-2008, 08:49 AM
|
#6
|
|
Member
Join Date: Nov 2007
Location: south shore, MA
Posts: 79
|
hmmm sounds interesting! i might have to make it out for this! i'm from halifax, so its about a 20 min ride for me!
__________________
| 2007 Maxima SE | Tinted Windows | Paradox Rear Window Lip | Progress Lowering Springs |KYB GR-2's | Progress RSB |19" Infiniti g37 wheels |Advanced Timing | Wrinkled Black Fujita | Bluebat Overlays | Racingline Battery Tie-Down | Racingline STB | ---cattman b-pipe for xmas and racingline y pipe in the mail
|
|
|
|
|
09-08-2008, 07:29 AM
|
#7
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Quote:
Originally Posted by nismomaxct
Finally something close by. This is a 15 minute drive from my house. I might use this as an opportunity to get a baseline dyno before I get the turbo installed in the next few months. By the way, the guys at Performance build some crazy mustangs and I've always heard good things about them.
|
Yeah Travis & Ben are ****ing awesome, Travis has a 6 second car so that kinda speaks for itself.
__________________
PM or call 774-766-7462 for SSIMS.
3-bay garage in Massachusetts servicing all your maxima needs |
|
|
|
|
09-08-2008, 07:31 AM
|
#8
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Quote:
Originally Posted by maxima92se
You are getting too busy Kev.. I still need a transmission but i need the money to get one. LOL. anyway i will try and make it in so you can drive the busted up vehicle and give me some quotes. I like the LSD tranny but the price right now is out ma range. But I will show some support and make an effort to attend.
|
If you don't come out I'm going to be pissed, I tried calling you the other day just to tell you about this, we really really need a boosted max to attend, besides...........
The Nissan that lays down the most power will not be paying $75
|
|
|
|
|
09-08-2008, 07:37 AM
|
#9
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Quote:
Originally Posted by 6thgenblackmaxx
hmmm sounds interesting! i might have to make it out for this! i'm from halifax, so its about a 20 min ride for me!
|
That's awesome, my uncle and cousin are both halifax cops, so if you ever get a ticket I can probably help you out. I've got a few 6th gen plenums + spacer kits if you want some power
__________________
PM or call 774-766-7462 for SSIMS.
3-bay garage in Massachusetts servicing all your maxima needs |
|
|
|
|
09-08-2008, 07:20 PM
|
#10
|
|
Senior Member
Join Date: Jul 2008
Location: Uxbridge MA
Posts: 219
|
I'm gonna try and make it only if I've got the $$$ to get my spacers + installed before then... you interested in installin em for me Kev? I pay cash 
__________________
Megan Racing Catback SSIM Injen Intake Timing Advanced Clear Corners 50% Tint Chrome Pillars 6000K Fogs
|
|
|
|
|
09-08-2008, 07:37 PM
|
#11
|
|
Member
Join Date: Nov 2007
Location: south shore, MA
Posts: 79
|
Quote:
Originally Posted by KRRZ350
That's awesome, my uncle and cousin are both halifax cops, so if you ever get a ticket I can probably help you out. I've got a few 6th gen plenums + spacer kits if you want some power |
i know exactly who youre talkin about! they're great! i also work in halifax part time and they stop in all the time, really great guys...both of them!
....and of course i want more power!
__________________
| 2007 Maxima SE | Tinted Windows | Paradox Rear Window Lip | Progress Lowering Springs |KYB GR-2's | Progress RSB |19" Infiniti g37 wheels |Advanced Timing | Wrinkled Black Fujita | Bluebat Overlays | Racingline Battery Tie-Down | Racingline STB | ---cattman b-pipe for xmas and racingline y pipe in the mail
|
|
|
|
|
09-10-2008, 09:42 AM
|
#12
|
|
Senior Member
Join Date: Dec 2002
Location: Boston Baby!
Posts: 3,469
|
i might be there...
__________________
--Jon--
Currently driving:
03 Maxima: 40k miles, Bodykit, CF hood, 20'' Chrome DUBz, Alarm, Tint, Eclipse AVN6500, Rainbow Profi Vandiums, Boston Pro60s, 2 12'' Type Rs, Suspension, Cleared 8k HIDs w/ DDE Angel Eyes, Intake, Exhaust, Timing Adv, Custom 2 Tone Interior, x drilled/slotted/zinc rotors, SS brake lines, etc.
92 Max SE: 5 speed LSD 230k Daily Driver FTW 4DSC!!!!
Retired:
97 Max modded: BURNED IN FLAMES
96 Max modded: Sold to brother
95 Max modded: Attacked By Volvo
|
|
|
|
|
09-10-2008, 11:49 AM
|
#13
|
|
Merc signs my checks
Join Date: Jul 2003
Posts: 6,851
|
damn shame you arent close to where i live
|
|
|
|
|
09-10-2008, 01:27 PM
|
#14
|
|
Supporting Maxima.org Member
Join Date: Jun 2007
Posts: 203
|
ill go even though i dont have a nissan anymore
__________________
2000 Maxima- GONE
2005 RX-8 - Stock with a catback- GONE
2005 GTO - K&N INTAKE and MAGNA FLOW CAT-BACK
|
|
|
|
|
09-16-2008, 10:52 AM
|
#15
|
|
Banned
Join Date: Nov 2007
Location: Boston MA
Posts: 581
|
Quote:
Originally Posted by KRRZ350
That's awesome, my uncle and cousin are both halifax cops, so if you ever get a ticket I can probably help you out. I've got a few 6th gen plenums + spacer kits if you want some power |
He man I'm still looking to do the spacer kit and the SSIM we talked about. I'm just looking to get my car fixed first. I have some pinging issues and rear o2 senor problems that the dealer has been trying to fix. I hope this nightmare is over on Friday.. I still have your Pm on the price but for the labor but can you PM me a price on the spacer kit cost.. Thank you Mike 
|
|
|
|
|
09-30-2008, 07:27 PM
|
#16
|
|
Member
Join Date: Jan 2008
Posts: 43
|
count me in. Ill be bringin my new SHO. See what it puts down for numbers
__________________
2000 Maxima SE 5spd. Borla exhaust, K&N Filters, MOMO carbon fiber pedals, Pirelli Pzero Nero 235/45/17, Pioneer AVIC D1, Infiniti Speakers, Profile 400x4, 600x2, 2 JL Audio 10w1v2's .........damn i miss that car.. 1/4 mile....fast
 
|
|
|
|
|
10-02-2008, 09:09 AM
|
#17
|
|
Supporting Maxima.org Member
Join Date: Feb 2005
Posts: 578
|
Kev.. call me back, I need your help.. And I didnt get that day off but my azz is calling in they knew ahead of time and they still schedule me. I really want to attend.
__________________
98 Nissan Maxima..
Mods..
Supercharged, FMIC, K&N CAI, 00VI, VAFCII, Short Ram intake, Budget Y, warpspeed high flow cat, Greddy SP2 Catback, dropped!!
Zeitronix wideband and datalogging laptop just for tuning
18x8 G35 rims wrapped in Dunlop W10 235/40/18 tires.
Z32 4piston calipers, Cobra Xdrilled/Slotted.
14lbs Super Charged Sleeper@332fwhp
SOON: RC440cc injectors, Transmission, clutch and headers!!
|
|
|
|
|
10-02-2008, 03:26 PM
|
#18
|
|
Junior Member
Join Date: Sep 2008
Location: Philly
Posts: 24
|
why cant it be in philly
|
|
|
|
|
10-03-2008, 12:53 PM
|
#19
|
|
Resident Mass. Brownie
Join Date: May 2005
Location: Malden, MA
Posts: 1,840
|
Quote:
Originally Posted by gvrules518
why cant it be in philly
|
Because we're in Massachusetts?
BTW, Kev, I don't think I'll be going to this one. Moneys and time are limited at the moment. Let me know how it goes and post up dynos/pics.
__________________
2002 Super Black SE 6-Speed (Best 1/4 Time: 14.639 @ 96.58 mph)
| Berk Intake w/ APEXi | APEXi WS2 | 17 BTDC | Eibachs/Tokico Illuminas 3F/4R | Progress RSB | ES MMs and Bushings | CE FSTB | H&R 15mm Rear Spacers | RTP Slotted Rotors | Axxis Metal Master Pads | SS Lines | 6,000ks D2Rs and H3s | Dark-V LED Lighting | VIS OEM CF Hood | 235/45-17 General Exclaim UHPs | G35C Seats | SSIM
|
|
|
|
|
10-03-2008, 04:12 PM
|
#20
|
|
Senior Member
Join Date: Mar 2007
Location: Mansfield,MA
Posts: 149
|
yo know ill be there
__________________
2002 Sterling Mist 6MT - Berk Intake, Catman Cat-back, SSIM, Rev-up Cams, Zex Wet 75 Shot, Grounding Kit, ES Motor Mounts & Shifter Bushings, Maxspeed Springs
N/A - 220whp/210wtq
75shot - 276whp/292wtq
|
|
|
|
|
10-04-2008, 11:26 AM
|
#21
|
|
Member
Join Date: Jan 2008
Posts: 43
|
Got the day off so ill def be comming and my friend wants to bring his car along too. Its not a max tho hes got a 96 Mazda 626 v6 is that ok. Ill be bringin my SHO.
__________________
2000 Maxima SE 5spd. Borla exhaust, K&N Filters, MOMO carbon fiber pedals, Pirelli Pzero Nero 235/45/17, Pioneer AVIC D1, Infiniti Speakers, Profile 400x4, 600x2, 2 JL Audio 10w1v2's .........damn i miss that car.. 1/4 mile....fast
|
|
|
|
|
10-04-2008, 07:50 PM
|
#22
|
|
Supporting Maxima.org Member
Join Date: Oct 2005
Posts: 3,677
|
Quote:
Originally Posted by black2000maxiSE
Got the day off so ill def be comming and my friend wants to bring his car along too. Its not a max tho hes got a 96 Mazda 626 v6 is that ok. Ill be bringin my SHO.
|
As long as it has at least one cylinder, a wheel, and a spark plug of some sorts than it's good.
|
|
|
|
|
10-05-2008, 01:56 AM
|
#23
|
|
Member
Join Date: Jan 2008
Posts: 43
|
sounds good. Actually he has what i like to call the VRQ35. It sounds like a cross bewteen a vq35 and a vr6 lol. then again my SHO kinda sounds like a honda  . flowmasters on a sho dont work 
__________________
2000 Maxima SE 5spd. Borla exhaust, K&N Filters, MOMO carbon fiber pedals, Pirelli Pzero Nero 235/45/17, Pioneer AVIC D1, Infiniti Speakers, Profile 400x4, 600x2, 2 JL Audio 10w1v2's .........damn i miss that car.. 1/4 mile....fast
|
|
|
|
|
