Northeastern U.S.For CT, DE, MA, ME, NH, NJ, NY, PA, RI, and VT Maxima owners.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
This thread is for installers only and the services that they can offer. If you have a specialty in a certain area, please post. Please do not post requests for help. Read the thread and then PM that person to see if they can help you
What I can do:
Gauges (4th gen only)
A little electrical work
RSB
Cone intake
I know it's not much, but i'm getting better. I live on Staten Island in New York City. Hit me up with a PM if you need help
Hey everyone, if you need help with any of the following, I'd be happy to lend a hand...(5th gen only guys! I know nothing about any other generation)
Swapping out tail lights
Installing/Changing fog lights and bulbs
Clear corners
Putting on Rims
Swapping out gauges (provided you have the correct parts)
Swapping out regular headlights for AE ones.
I know, it's not much, but every little bit helps right? And hey I'm FREE so there. I'm in Binghamton, NY. Oh yeah, I'm not a professional or anything, so go to a real mechanic if you want a guarantee or something.
Wasim
__________________
2006 Honda Accord EX
*sold*2002 Maxima SE 6-speed
*R.I.P*2001 Maxima GXE
I work as a mechanic part time, so there are a whole host of things that I can do, icluding stereo, box building, most of the common mods, deatiling, and a whole bunch of other things I don't feel like writing.
i am in Derby, CT, I have the use of a garage, and have almost every tool known to man.
I have done over a dozen sets now and I guarantee they will match your inner tails. There are quite a few people riding around with my taillights and I have not heard anyone being unhappy with the job I did.
The process:
-Because it takes 1 hr. + to do the job RIGHT, + taking off and re-installing the taillights, I rather save time and make it more convenient... What I do is take your factory amber/red outer taillights off your car in exchange for already done red/clear taillights + 50$. That would only take up around 10 minutes of your time, for me to take off your stock tails and install the red/clear ones. Instead of you waiting for me to clear them. To make it fair for the next person and keep the cycle moving, I cannot deal with you if your stock tails are cracked or dinged up since I will be later taking your stock taillights and clearing them and use them to do the same thing with the next person. I will install perfect, already cleared taillights in exchange.
I have pictures, I will upload them and post a link. It took me a lot of trials and broken sets to get the tightest fitting template but it's done.
I'm pretty busy with school and work but we can arrange something convenient. I'm in Staten Island, NYC.
-FSTB's
-Pop-chargers
-Can build custom hybrid intakes
-Dash bulbs
-automatic shifter light bulb
-Tail light swap
-Clear corners
-Fuel filter changing
-Throttle body cleaning
-Spark plug changing
-Supercharger plate/blower assembly and mounting onto the car
__________________
1997 Maxima Neptune Blue SE
In Regards to Nissan Service Department:
<xxxxx>Why do i bend over and constantaly take it in the *** from nissan
<xxxxx> need to replace my coil packs there gonna ask me do you want that with or without lube
-install FSTB
-red/clear 97-99 tails(will require more time than NYCE maxima, i suggest u go to him)
-rewire corners
-install indiglo dash guages
-clean throttle body
-change fuel filter
-change spark plugs
-install any kind of intake, cold air will take more time
-replace burned out wiring harness on headlight socket
-soon-wire mesh grill
__________________
97 auto sage mist green --
= PR Cai/Budget Y/ Cattman Catback/Max Tuning VB/ 8k McCullock HID/ CF hood/Ksport/Stillen front lip and rears + Skyline sides/18" Velox Nova in Pirelli Pzero Nero/5% tint/LED interior
Suspension installs, body work and custom paint work
Proline Body and Chassis
545 River Drive
Elmwood Park, NJ 07407
201-398-1512
A full service collision repair facility owned and operated by my brother Todd.
Complete suspension installs, please call Tom at 551-427-5157.
MAXIMA - $180
350Z/G35 $225
Others quoted upon request.
Brakes - $40/axel for pads $50/axel for rotors and pads.
Full Body Kits, painted and installed starting at $400
NOTE: Price depends on kit condition, Pearl or custom colors are extra, Call for pricing for individual pieces.
Nexgen Auto Spa (Owned and operated by me! )
111 Spring Street
Ramsey, NJ 07446
201-934-6200
DETAILING:
Professional machine compound, machine polish and hand wax (3 step process) for an ultimate high gloss wet looking shine that doesn't wash away.
$200 - ($225 for Black only)
Interrior detail - $50
Other detail services are available, call Tom @ 551-427-5157
I welcome any other work inquiry as well.
Please PM, Call or Email to contact me.
Tom
__________________
As the 4th gen ages, its owners get younger.
I am around Lowell, Ma. I can help with pretty much all the regular mods like suspension, tuneups, whatever. PM me and I will let you know if I can help with anything you got.
whatever work Dex (Supa Lao), Dave (dlicari) and myself cannot do, rob (tilleys99) can, since he has a shop to work out of
clear corners install
exhaust work
gauge install
MEVI install
body kit install
brake work.. hmm NO (rob can though)
car stereo install
sturt and sway bar i install
intake install
- Any thing you can do with Air Tools.. (see disclaimer)
- Red/Clear Tails for money
Disclaimer: I will not do work for you.. i will walk you through and guide you how to do stuff.. I will also not be responsible if you fck up your car. i don't want you b!tching to me at my house about something gone wrong.. if you can live with these rules/disclaimer.. you can come to my house and get your stuff done
NB: Also please give me more than 1 week notice in advance for when you plan to do stuff.. holidays i am not free.. don't call me thursday or friday for something you want done ths weekend
Originally posted by Kashoggio i work for nissan... who knows what I can do
if you work for nissan we know that you won't fix anything that goes wrong lol.
i'm in western mass/Palmer and most mods
*stereo
*intakes install
*suspension
*fstb
*rsb
*exhaust (no y-pipes, too many headaches)
*bulbs
*rims
*ect.....
Had the following audio/electronic related work done by Don (Pearl96max):
-Custom sub box w/ Diamond Audio 12" sub
-Purchased Premier 740mp and Memphis 250D amp from Don
-Amps install, rear crossovers relocated and complete speaker wire install
-Custom front tweeter brackets install
-Front speaker wire install and relocated the crossovers
-Purchased Viper 550ESP and installed by Don (authorized DEI reseller/installer)
I'm extremely satisfied with his work. Rest assured that all work done by Don will be warrantied by him. I'd recommend Don to anyone who's looking to buy anything in car audio, aftermarket alarm, or to customize their system.
I can do the following:
FSTB
RSB
RSTB
Struts and springs. (require spring compressor)
CAI
Pop-Charger
Tranny-Cooler
VB transplant
Spark Plugs
Oil Change
Tranny Filter change
Full major tuneup
02 sensors
Aftermarket Gauges (ie Boost, EGT, etc)
Stillen Bodykit install
Brakes Pads
Rotors
Stud replacment
Brake lines
Flat Tires
Headlight Taillight swap
Fog light rewire
Sidemarker Rewire
Starter swap
Hardwiring radar detectors
LED scanners
CD-Changer install
Amp and sub install
Polished valve covers
Walbro fuel pump for 4th and 5thgens
5thgen Gauge Clusters. (indiglo gauges!!)
Dash trim
Note: I am not a professional mechanic nor do I warranty my work. If something goes wrong or breaks during the install or afterwards, blame only yourself for being cheap. I don't charge $60 an hour but I do ask that you treat me to a nice dinner since I will be cranky from the long hours spent under you car. I highly recommended that you visit a proffesional mechanic for most of these installs.
Originally posted by 97MaxGurl Had the following audio/electronic related work done by Don (Pearl96max):
-Custom sub box w/ Diamond Audio 12" sub
-Purchased Premier 740mp and Memphis 250D amp from Don
-Amps install, rear crossovers relocated and complete speaker wire install
-Custom front tweeter brackets install
-Front speaker wire install and relocated the crossovers
-Purchased Viper 550ESP and installed by Don (authorized DEI reseller/installer)
I'm extremely satisfied with his work. Rest assured that all work done by Don will be warrantied by him. I'd recommend Don to anyone who's looking to buy anything in car audio, aftermarket alarm, or to customize their system.
Good luck.
AnGe
I highly recommend Don for any Audio/Electronic work that you need done. I purchased and had him install my Viper 550 alarm w/ Remote Starter, and he also installed my entire stereo system. Unfortunately, I met him after I bought everything, but I found out that he offers some great prices on high quality products like JL Audio, Diamond Audio, and much, much more.
If you need any type of work like this done for your car, I suggest contacting Don. He lives in Edison, NJ (New Brunswick area). I live almost 45 minutes from him, and it's well worth the trip. I've been to his place 4 or 5 times now, and I plan on going back in the future, even if I don't have a Maxima anymore.
Cliff's Notes: ditto to what Ange said. Don AKA Pearl96Max =
Later,
-Nick
__________________
2005 Regal Blue Pearl Subaru Legacy GT-Limited 5MT
Sold: 1997 Deep Evergreen Nissan Maxima SE Auto
*Click the above pictures to visit the corresponding vehicle's CarDomain page*
i need to install my kyb and weapon r coil overs, can anybody help me,
and i have a bodykit, know a good body shop??
i can
install dash gauge
install head unit
install strobe system
install police siren
install amp ( not pro)
install street glow kit
install seats
install door pannels
install tail lights
install head lights
install corner lights
I can offer my assistance in the car audio department. I do not work for a shop, but I've installed quite a few systems and have a good idea of what I'm doing. Also, I may be able to assist in any mods that I have on my maxima. All of my mods were self-installed. I'm located in lil' Rhode Island.
__________________ Looking for MAXIMA.ORG decals? Click below!
hey guys, if you need any suspension work done, especially if you're lookin to do an air ride suspension or lowering your Max/I30 you should def check out Motion Hydraulics in Brockton. Talk to Jermaine there. the guys is cool sh*t and he did a sweet job on my custom suspension
__________________ 1998 Infiniti I30t
18x7.5 RacingHart CR1s
235/40/ZR18 Yokohama AVS ES100
KYB AGX, Eibachs, Stillen FSTB
Jim Wolf intake, PIAAs & LEDs
Cefiro 1pc Headlights & Sport Grille
Check out the ride at www.cardomain.com/amustafa_i30t
I'm located in the Eastern part of PA, 5 minutes from the border of jersey. Cities you might know that I live near are Allentwon, 50 minutes north of Philly, of 30 minutes south of the poconos.
What I can install...
not much but if you need to use air tools or anything like that you are more than welcome to come and use the compressor and dozens of air tools I have. I also have jack stands and all that jazz and will provide a heated garage
Please notify me in advance when you would like to come by and do work. If you just show up at my house without notice I will sick my dogs on you unless I'm in a good mood I might let you in
Disclaimer: If you come to my house to use my stuff remember you are my guest and would expect you treat my stuff as it were your own. I am not responsible for any damage you do to your car while you work on it in my garage. Not saying I will blow your car up but if you screw it up dont blame me because you are at my house using my tools.
hey guys, if you need anything (well, almost anything) done to your car and don't wanna pay your mechanic tones of $$$ then come to me. I can do most of the simple and not to simple jobs that you might not know how to do or not have the right tools to do it. here's a partial list of the things I can do
-changing engine fluid (can provide amsoil at dealer price or bring your own)
-changing manual transmission fluid (can provide amsoil at dealer price or bring your own)
-brakes
-ss brake lines
-suspension
-sway bars
-strut bars
-oxygen sensors
-knock sensor
-transmission
-short throw shifter
-rewiring the clear/amber lights (both of them are on at the same. when the turn signal is on, 1) lights are off, off both lenses blink together 2) when lights are on they alternate you can look at my lights before you decide if you want to do this, I think it's a great improvement over the oem setup
-changing axles
everything that is listed here I have done on my car and helped my friends with their cars, I raced my car and everything I have done is track proven (I'm still alive). I have a 2 car garage, air tools ... to do almost any job
you can e-mail "iwannabmw" for a recomendation, Mark and I work on each others cars and I designed a bracket for his by-pass filter on his e-30 325is (bmw)
e-mail - kderman251@hotmail.com for pricing and details if you would like something done, since i don't know what the mechanics charge be honest and tell me what they charge so I can base my pricing from there. one benefit that you can have is watching everything I do, and participate if you so desire, this way you know it's done right, I have a factory manual for all the specs.
My friend and I can basically do anything mechanically related and suspension related on basically any car. We have done turbo kit installs, spring installs, camber kits etc. All quality work at cheap prices. JZee109@aol.com for more info. I'm located in Trumbull, CT.
myself and 2 of my friends are willing to install pretty much anything. PM/IM me if you need something done and i'll let you know. we can take care of pretty much anything on a 3rd gen max or any 240sx.
^^^ MaDMaX024 does good work. Got my suspension installed by him in no time at all and at a good price. Highly recommended if you need something done. Thanks!!
^^^ MaDMaX024 does good work. Got my suspension installed by him in no time at all and at a good price. Highly recommended if you need something done. Thanks!!
- kevin
it was a pleasure doing business with you. i'm surprised it only took 3.5 hours considering all the distractions (my MR2 friend with his wiring amusement, stupid phone calls..hahaha) and my usual partner's absence.
did you play with the strut settings yet?
also to my list of capabilities, i now have a MIG welder and access to a garage with air tools, lights, heat(for the winter). whatever you need, just run it by me first!
our policy is 50% of what a shop would charge for labor, maybe less depending on the job. we usually get good deals on parts too so if you're going to pay full price, let me know in advance and i'll see what i can do.
we make exhausts, are in the process of making 2 turbo kits, i've MADE my own coilovers(still untested but kevin can be my witness in saying they're VERY stiff). basically anything imported we can take care of.
JEFF @ Maximum Tuning is the man,...I wont take my gen.5 anywhere else. 
but if you screw it up dont blame me because you are at my house using my tools.
Linear Mode
