electronic WOT switch for DR mod?

nzelinsky · 08-24-2009, 03:23 PM

Hey I am trying to figure out how to set up a wot switch for the drop resistor mod. I have a 5.5gen which is dbw so I need electronic switch.

http://www.nitrousexpress.com/produc...ils.php?id=336

Will this work? I know the circuit has to be normally closed... does anybody know how these work is it normally closed or open? If it is normally open is there a way to modify to make it normally closed?

*t6378tp* · 08-24-2009, 06:01 PM

with a 5 pin relay

nzelinsky · 08-26-2009, 02:53 PM

huh? care to elaborate, I have no idea what you are talking about

krazy6 · 08-27-2009, 02:09 PM

Pretty sure he is talking about something like this:

http://www.dynotunenitrous.com/store...p?idproduct=47

nzelinsky · 08-27-2009, 02:24 PM

So you modify the tps sensor switch with that relay? sry Im not very good with electronics...

*t6378tp* · 08-27-2009, 08:12 PM

wire it like this, tps sensor to the relay, relay to the drop resistor

when you go wot the tps will activate the tps sensor which will send 12v to the relay and activate it, then if your using a 5 pin relay use the normal closed circuit so when powered the relay will pull power and switch to open disconnect the drop resistor giving you a drop mod activate by a tps wot switch

nzelinsky · 08-27-2009, 10:10 PM

Quote:

Originally Posted by t6378tp

wire it like this, tps sensor to the relay, relay to the drop resistor

when you go wot the tps will activate the tps sensor which will send 12v to the relay and activate it, then if your using a 5 pin relay use the normal closed circuit so when powered the relay will pull power and switch to open disconnect the drop resistor giving you a drop mod activate by a tps wot switch

Okay thanks, Now I just have to find somebody who understands all this electric-ese to install it for me... Im not very handy with anything besides nuts and bolts