Nitrous questions

[viperboy]

I know there is a forum specifically for nitrous, but I didn't see many threads specific to the 3.5L. I was just wondering what people are running. This would be a mod for a little later down the road, I'm just still trying to read about it. What is the best kit to buy, a wet or dry? I would wanna run a kit on an all stock motor (with the exception of the GAB v2 mod, not that it makes a difference). It is my daily, and I would only use nitrous every now and then. It needs to be RELIABLE. From what I read, if you choose a good kit for a stock setup, you can run one safely and not affect reliability as long as you're not running the living piss out of it all the time. I have a 6MT, so would the stock clutch be fine? How easy is it to install and how long does it take? Thanks

[VQP0WER]

Post this in the Nitrous forum. You also didnt need to post two of the same thread in here.

[AceofSpds]

same things for 3.0 would apply to your 3.5

a key part for you is getting an rpm window switch since you are 6spd

[viperboy]

Originally Posted by VQP0WER

Post this in the Nitrous forum. You also didnt need to post two of the same thread in here.

Didn't mean to, I guess it double posted.

Originally Posted by chopstix2nrz

same things for 3.0 would apply to your 3.5

a key part for you is getting an rpm window switch since you are 6spd

What do you mean about the rpm switch? Sorry, I'm unfamiliar with nitrous. I'll look around and post in the Nitrous forum too.

[irish44j]

Originally Posted by viperboy

I know there is a forum specifically for nitrous,

Use it. Moving...

[viperboy]

Originally Posted by irish44j

Use it. Moving...

Already posted one there. You can delete this thread.

[KRRZ350]

Many of the questions are in the FAQ's up above, you should read them first, if you have any further questions I would love to help.