NitrousDiscuss dry, wet, and direct port nitrous setups. How many shots can you handle?
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
I've read a lot of the Nitrous FAQ but I was just wondering could I put the kit on jet it for 75 hp wet and do nothing else to make it not ping i.e. 93 octane gas which i probably will be doing anyway when i get another job or sparkplug change. I read about the copper spark plugs with the shorter gap just wondering if it would be necessary.
and would that make my car stock(i dont consider the intake a upgrade lol) auto 97 should be same weight as car came stock or a little more a high 13 second car? thats my goal for some reason. I believe thirteens is where its at lol.
__________________ www.myspace.com/chazmcgee hit me up on it
98 Maxima traded for a 1994 Trans Am and my friend blew up the maxima
90 240sx sold for 240$
91 Mustang trying to sell
08 Ford F-150
1994 Trans Am trying to sell
Bye bye sanity.
I've read a lot of the Nitrous FAQ but I was just wondering could I put the kit on jet it for 75 hp wet and do nothing else to make it not ping i.e. 93 octane gas which i probably will be doing anyway when i get another job or sparkplug change. I read about the copper spark plugs with the shorter gap just wondering if it would be necessary.
and would that make my car stock(i dont consider the intake a upgrade lol) auto 97 should be same weight as car came stock or a little more a high 13 second car? thats my goal for some reason. I believe thirteens is where its at lol.
the nx kit is fine, run 93 or higher only when spraying, get atleast 1 step colder plugs with a reduced gap .037 is a good starting point, and no I do not think a bone stock 97 auto max with a 75 shot of juice will run 13's
you will need alteast a y-pipe and cutout (or just disconnect your exhuast from the y-pipe at the back at the track), some weight reduction and drop mod
__________________ My Cardomain _ _Maxima runs 13.4@109
Dyno:? whp & ? wtq
Nitrous PB: 13.4@110mph
All Motor PB: 14.0@99mph
3280lb with driver, full trim, rims, spare, jack, fluids, etc & notorized proof
i was going to do a y pipe, and with the drop mod is there truly a time proven difference?
so will my engine knock if I don't use 93 octane and one step colder plugs?
__________________ www.myspace.com/chazmcgee hit me up on it
98 Maxima traded for a 1994 Trans Am and my friend blew up the maxima
90 240sx sold for 240$
91 Mustang trying to sell
08 Ford F-150
1994 Trans Am trying to sell
Bye bye sanity.
i was going to do a y pipe, and with the drop mod is there truly a time proven difference?
so will my engine knock if I don't use 93 octane and one step colder plugs?
The drop mod will save your auto tranny. Don't cheap out on the gas, if you can't afford premium, don't use Nitrous. There is a good saying, 'You have to pay to play'. If you cannot afford to replace an engine, or a transmission, at any given moment, and your car is your only means of transportation, DO NOT use nitrous, or any other major power adder.
Using regular gas and stock plugs, you are GREATLY increasing your chances of detonation, and when running nitrous, just a second or two of detonation = bye bye motor.
__________________
98 SE - VQ35
2k SE - Stock... pretty much
Boost, juice, conversions, been there, done that.
__________________ www.myspace.com/chazmcgee hit me up on it
98 Maxima traded for a 1994 Trans Am and my friend blew up the maxima
90 240sx sold for 240$
91 Mustang trying to sell
08 Ford F-150
1994 Trans Am trying to sell
Bye bye sanity.
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
Your not a noob search ftw. Its pretty simple also.
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
Your not a noob search ftw. Its pretty simple also.
i found out from my friend
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
Cool cool. Yea man its pretty simple and worth every penny lol
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
Cool cool. Yea man its pretty simple and worth every penny lol
lol the funniest thing is that my best friend has it installed in his 98, but i didnt know what it was called (tard) lol
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
lol the funniest thing is that my best friend has it installed in his 98, but i didnt know what it was called (tard) lol
Yea i dont have one of those thingys
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
he said it didnt seem like a difference and to just get a tranny cooler
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
he said it didnt seem like a difference and to just get a tranny cooler
If you are going to boost you need one.
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
yeah i said maybe cause he wasnt boosted, but i told him better him have it and not need it than him want it but dont have it
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
he said it didnt seem like a difference and to just get a tranny cooler
What kind of difference was he looking for? If he didnt feel the difference in the car shifting gears then he did it wrong. Alot of people do this mod because it reduces heat between shifts when racing thus extending the life of the tranny.
What kind of difference was he looking for? If he didnt feel the difference in the car shifting gears then he did it wrong. Alot of people do this mod because it reduces heat between shifts when racing thus extending the life of the tranny.
I was thinking that you should do both any who.
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
What kind of difference was he looking for? If he didnt feel the difference in the car shifting gears then he did it wrong. Alot of people do this mod because it reduces heat between shifts when racing thus extending the life of the tranny.
it was clint, im pretty sure you know him, he shifted but to my understanding on these things they're suppose to help on times, but he said it didnt
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
it was clint, im pretty sure you know him, he shifted but to my understanding on these things they're suppose to help on times, but he said it didnt
Yeah I've seen him at a few meets. I'm pretty sure theres no real evidence of it helping your times and if it does it would be very very minimal. I've tryed it with it on and off during back to back runs and my times didnt change.
Yeah I've seen him at a few meets. I'm pretty sure theres no real evidence of it helping your times and if it does it would be very very minimal. I've tryed it with it on and off during back to back runs and my times didnt change.
cant see why he was unsatisfied, anyways i will get any tranny safe mods as long as they dont kill time lol
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
cant see why he was unsatisfied, anyways i will get any tranny safe mods as long as they dont kill time lol
There's really two different mods for the automatic that make a serious difference.
1. Drop-resistor mod.
2. Shift_Fast mod.
The drop mod by itself raises the internal pressure of the automatic tranny. There is less slippage during shifts, but - the transmission computer still controls the shifts, even if you move the shift lever yourself.
The Shift_Fast mod is really a simple circuit to directly control the two shift solenoids in the transmission. This bypasses all the things the transmission computer does to modulate shifts so Grandma doesn't notice. The shifts are then very hard and very positive. When spraying a 3.0, my M&H slicks would scream going into third gear.
These two together are amazing - I launched at 2800 (Edge TC) and went into spray immediately, the MSD made the Shift_Fast shift at 6500 into 2nd, then again into third gear - making the M&H slicks complain all the way. The installed 3.0 was one of three bone-stock 3.0s I used up while playing with stock ECUs and 150-shot of nitrous through two stages...
Now that I have a cammed-up 3.5 installed, I'll use the same tranny and Shift_Fast controller for the 2008 season. Should be fun.