Midwest / TexasFor Maxima owners in AR, KS, NE, OK, and TX.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
Sunday's dyno meet has been cancelled due to Cobb Tuning's lack of staff. However it has been rescheduled for next month. This can be good as it gives more time to spread the word for more participation, and gives us more time to work on our cars and get them ready. We will still have our regularly scheduled meet this Saturday, November 14th at Coach's at 5PM...southwest corner of Forest and Abrams.
Greetings Nissan Enthusiasts,
Well, the time has come. Many have requested and your DNE Staff is here to deliver. It's been since June 2003 since DNE has hosted a dyno day and I don't know about you, but I think it's been WAY to long.
This month's meet will be a 2 part meet. First and foremost, we will have our usual DNE Meet dinner on November 14th at Coach's. It's been a while since we've been there, and quite frankly it's been missed. We will enjoy the usual banter between BlueBOB and everyone else, Darrick's random inserts of ghetto-ology, LatinMax's urge to touch anything that moves, and JNCoRacer's need to hate on everyone.
Part 2 will be what everyone's been looking for. The dyno meet will be hosted by Cobb Tuning in Plano. You can eiter find a map on Cobb Tuning's website or use the address below. The actual dyno meet will take place on November 15th (Sunday). The shop is not usually open on Sundays, which means we will have the shop to ourselves! The cost of the dyno will be $45 for 3 pulls on their all wheel drive dyno. Cobb Tuning will also be providing food and drink for the day, so the price is definitely worth it. At this time, we are assuming we'll start the dyno day at 10am till we're all done. We're also going to try to lump a bunch of like cars together to make things smoother Cobb. Also, if you'd like some advice or help about a new part, Cobb has offered to help on that stuff as well. So, if you want to see what kind of increase a new part provides we can work that in as well.
Cobb Tuning's Address
1200 Placid Avenue
Suite 550
Plano, TX 75074
Phone: 214.291.3020
So there are a few points for this meet. Let us know if you can make any part of the meet and if you plan to come to the dyno. If you are coming to the dyno, let us know if you'll just be coming to spectate or if you're going to run on the dyno. If you are going to run, let us know when would be best for you (morning, lunch, afternoon, or all day). This will help us build a schedule of cars to allow us to run as many cars as possible.
If there are any questions, please don't hesitate to ask.
I honestly can't remember what brand of dyno it is. You can call and ask. I do know that it's an AWD dyno. Obviously doesn't mean a thing to a maxima driver, but I think there are only a few brands of AWD dynos. I could be wrong though. Might be on their website.
CobbTuning.com
__________________
I'm just a big bang Baller On a Budget...
Wow.. Youre an idiot.. I wont be showing up to any more meets if this is the attitude to expect.. For anyone who wanted to know CobbTuning uses a Mustang Dyno
MAXC, hmm is that a 5th gen yea we need some more of these in attendance, please. i'm the only one holdin it down for us up here. well 2 of them anyway
__________________ You just bumped into the wrong max
MAXC, hmm is that a 5th gen yea we need some more of these in attendance, please. i'm the only one holdin it down for us up here. well 2 of them anyway.
Jarrod you stupid hahahah, dont worry bout him jason, you gotta meet him he's cool people.
__________________ You just bumped into the wrong max
I dont know yet if ill make it.. I have other plans that weekend and i cant decide what i want to do.. Ive been wanting to get on a dyno tho since i did the swap.. Haha thanks nick.. glad to see he treats everyone like a dbag.. dude needs to get laid.. whens the latest we could sign up for the dyno?
I get laid regularly, ****. I was the one at the lake meet with the hot redhead girlfriend. You were the one riding solo with your fly-*** stunner shades.
I can be a great guy, but I dont put up with peoples ****.
^^lmao.. 'I was just being a smartass. Youre the one who took it to a personal level and got your feelings hurt.' now who has their feelings hurt.. geez chill out dude.. as far as putting up with ppls ****.. im pretty sure youre the only one putting it out.. and if i remember right.. your g/f wasnt the 'hot' one that showed up that day
I can be a great guy, but I dont put up with peoples ****.
Did you ever think that there are other people in the world that think the same way..
Look man.. Im not going to fight you.. 1st rule of *hit talking.. If you cant take, dont talk it.. And being a smart *** is cool if you know the person, otherwise they look at you as an a$$hole.. no point intended.. but you dont know me.. if i offended you.. no hard feelings.. but i dont put up with ppls **** either
[quote=Majestic Ken;7280013]MAXC, hmm is that a 5th gen yea we need some more of these in attendance, please. i'm the only one holdin it down for us up here. well 2 of them anyway.
i know, i wish, i dont have nothing to dyno for. plus i got a check engine light, and pilot bearing in tranny goin bad. so i'm sure if cobb gives it a good rev to 6k that they wont cover the tranny if it blows
__________________ You just bumped into the wrong max
i know, i wish, i dont have nothing to dyno for. plus i got a check engine light, and pilot bearing in tranny goin bad. so i'm sure if cobb gives it a good rev to 6k that they wont cover the tranny if it blows
ha, yea, they won't cover the tranny and they'll want to charge you for the damage do the dyno from the fluid that goes all over it
__________________
I'm just a big bang Baller On a Budget...
I'd come put my car on the dyno just for the hell of it but I need tires REAL bad, but I'd much rather spend the money on turbo parts lol. Besides I already know what it puts down so its all good. I may come just to watch and hangout but we will see.
Ken, you're not the only 5th gen...
I havn't been around in awhile but would definitely like to dyno. Only prob is supposed to close on a house end of month and dunno if I should be spending the money so I may just come to watch if I can make it out. Do we need to RSVP or can we jump in the day of?
__________________ '02 Maxima SE 6MT : Place Racing CAI / Cattman Headers / 2.5" OD Cutout / NWP Spacers / BlockPlate / UDP / ES MM / Exedy OEM Clutch / 6Gen 6MT Trans / 6Gen Brakes / Tokico Illumina / Progress Springs / Progress RSB / 18" SSR Type C /
dang where the hell u been wanna sell that dump? Yea I fixed one problem yesterday. got $1200 to go................................................ .................................................. .................................................. .................................................. ........
__________________ You just bumped into the wrong max
What'd you fix, and wtf you have to do that costs $1200???
Work has been keepin me busy, and freetime been house hunting. I lost the bid on the first one I wanted but the 2nd one I found my offer was accepted now just waiting to close.
I sent u the pic of what I found in my transmission too right? Seems theres always something going on w/ the car
I should sell the dump since I never use it, so I dunno maybe I will.. I need a cat or test pipe though to replace it..
__________________ '02 Maxima SE 6MT : Place Racing CAI / Cattman Headers / 2.5" OD Cutout / NWP Spacers / BlockPlate / UDP / ES MM / Exedy OEM Clutch / 6Gen 6MT Trans / 6Gen Brakes / Tokico Illumina / Progress Springs / Progress RSB / 18" SSR Type C /
I know, just tryin to be good till we close b/c as soon as I get in there I'm gonna need a Fridge, lawn mower, work bench, etc, etc.. **** adds up! I do want to know what my car's making now, but kinda don't at the same time.. I know I'll be pissed off with whatever it lays @ Cobb b/c it's a mustang awd dyno...it's not like I'm going to tune anything lol
__________________ '02 Maxima SE 6MT : Place Racing CAI / Cattman Headers / 2.5" OD Cutout / NWP Spacers / BlockPlate / UDP / ES MM / Exedy OEM Clutch / 6Gen 6MT Trans / 6Gen Brakes / Tokico Illumina / Progress Springs / Progress RSB / 18" SSR Type C /