Alright, i have a buyer for the car. So some of the items are now considered sold. What's left is what's listed below.
============
Please let me know if you're interested. Serious inquiries only, please. Whoever contacts me first on a particular item by posting in this thread gets first dibs.
Prices below have been lowered and does not include s/h costs, which are extra, if you're outside the Houston area.
300zx TTZ BBK - $500 for all
These are for (2) two front 300zx Aluminum TTZ 4-pot calipers with all the hardware. I rebuilt these myself and painted it flat black but never got a chance to install them. They will come with two 2004 Maxima front rotors (brand new, painted) and a brand new set of Hawk HPS pads. You will just need Matt Blehm's bracket kit and the brake lines.
FSTB
Generic e-Bay brand. One of the very first on a 2k2, i tested these out for the manufacturer and has been on my car ever since 2001, has minor knicks on the under section but it is structurally sound - $25
Addco Rear Sway Bar
Bought these from Cattman some time ago. I've had it since 2002. It ain't pretty but it works and from what i can see (now) it only has surface rust and grime (i painted it before installation but that can only go so far given where the bar is located). - $55
Would the FSTB and RSB fit on a 2001? Where are you located exactly in Houston.. PM please and Do you think the rust on the RSB has any effect on it's integrity?
Guys, starting in about two weeks i'm letting go of these items. Please let me know if you're interested. Serious inquiries only, please. Whoever contacts me first on a particular item by posting in this thread gets first dibs. If i don't sell them, they're going with the car on trade-in.
Tires & Wheels
Nismo Rays Engineering 57F 18x8.5" +45 wheels (Forged), mounted on 245/40/18 General Exclaim UHP tires. Wheels weight 17 lbs. each. No curb rashes or knicks whatsoever.
This is for a set of (5) wheels and tires. The 5th wheel originally bent a lip but has been professionally repaired by SABS in Houston. Use it as a spare if you want to.
The "NISMO" sticker has been taken off.
I would like to do $1000 + trade for a decent set of 2k2 17" OEM set-up with decent tread tires.
When i unboxed it
Installed
300zx TTZ BBK
These are for (2) two front 300zx Aluminum TTZ 4-pot calipers with all the hardware. I rebuilt these myself and painted it flat black (left the "NISSAN" unpainted for contrast) but never got a chance to install them. They will come with two 2004 Maxima front rotors (brand new, painted) and a brand new set of Hawk HPS pads. You will just need Matt Blehm's bracket kit and the brake lines.
I'd like $650 for these.
Aluminum Spacers
I've got two sets of used Ichiba 5mm spacers (no lugs included) - $50/pr
One set of unused Ichiba-like 15mm spacers (with lugs) - $60/pr
Both are hub-centric and will fit our cars for sure.
FSTB
Generic e-Bay brand. One of the very first on a 2k2, i tested these out for the manufacturer and has been on my car ever since 2001, has minor knicks on the under section but it is structurally sound - $25
Addco Rear Sway Bar
Bought these from Cattman some time ago. I've had it since 2002. It ain't pretty but it works and from what i can see (now) it only has surface rust and grime (i painted it before installation but that can only go so far given where the bar is located). - $55
Modified 2001 GLE Taillights
Bought these used here on the .Org, i then tinted it to look like a 2001 SE taillight. Clearcoated over it. Was originally going to do a LED conversion but scrapped the idea. There are some scratches on it that i couldn't buff out, and there's a small crack at the very corner (seen on close up) - $60
Infiniti Basslink
I bought this back in 2005 (or 2004), used it since then. I think it still works, it's still installed in my car but my head unit has been giving me problems so i can't test it out, but if you have a readily available power/signal line on your car you're free to test it when i take it off. - $100
Again, it's going to be another two weeks before these begin to be available. So interested parties are going in a priority list for now.
Thanks for looking.
Do you mean wheel studs instead of lugs for the spacers? If so, are the studs 12x1.25?
Would the FSTB and RSB fit on a 2001? Where are you located exactly in Houston.. PM please and Do you think the rust on the RSB has any effect on it's integrity?
It should! The only reason i had to test fit the FSTB is because of how the 3.5 engine sticks up higher near the firewall versus the 3.0.
I made a quick look last night, it's mostly surface rust from what i can see. I'll know for sure once i get the car jacked up, or at least when it's removed.
I can do that for the lighter items like the spacers. Can you wait a couple of weeks? The 5mm is still on the car, and the 15mm's are in storage right now.
It should! The only reason i had to test fit the FSTB is because of how the 3.5 engine sticks up higher near the firewall versus the 3.0.
I made a quick look last night, it's mostly surface rust from what i can see. I'll know for sure once i get the car jacked up, or at least when it's removed.
hmm, if it seems to be all good on the rsb, we could meet somewhere, would you go for $70?... gas is expensive on premium
I can do that for the lighter items like the spacers. Can you wait a couple of weeks? The 5mm is still on the car, and the 15mm's are in storage right now.
Thanks.
Sure, as long as i could recieve them by the first weekend of July so that i can install them that weekend.
Quick question, with the 15mm did it make the wheel sit flush with your fender? Thats the look Im going for. I have a set of H&R 20mm spacers, but need wheel studs wich would be more then what your selling your spacers and studs for.
On the RSB, is all the parts / bolts / bushings, in order for it to be installed be included with it, like everything that the kit would have..
I'm currently posting via my cellphone, so i might be a little late in responding to anything, sorry if this is a double post, i think i hit it send twice, lol.. (LG Voyager, not a PDA, its super slow)
Sure, as long as i could recieve them by the first weekend of July so that i can install them that weekend.
Quick question, with the 15mm did it make the wheel sit flush with your fender? Thats the look Im going for. I have a set of H&R 20mm spacers, but need wheel studs wich would be more then what your selling your spacers and studs for.
I never actually got to install them, they're pretty much in brand new condition, but i got them based on what i've seen on the .Org for the OEM offsets (30mm being the ideal offset for the rears on 5th gens).
I never actually got to install them, they're pretty much in brand new condition, but i got them based on what i've seen on the .Org for the OEM offsets (30mm being the ideal offset for the rears on 5th gens).
Hey guys, just got my machine back up and running. All pm's have been replied to. I'll get some pics up this weekend for those wanting them, and can start shipping the other stuff next week.
Hey Mike! Long time no hear/see/read! How's it going? Man, i still am a big fan of your rims--regardless of how insanely wide i think they are. LOL. If you really are interested in my rims, let's work something out. 1/mo is probably pushing it but again, let's talk about it. LOL.
Hey guys, just got my machine back up and running. All pm's have been replied to. I'll get some pics up this weekend for those wanting them, and can start shipping the other stuff next week.
Hey Mike! Long time no hear/see/read! How's it going? Man, i still am a big fan of your rims--regardless of how insanely wide i think they are. LOL. If you really are interested in my rims, let's work something out. 1/mo is probably pushing it but again, let's talk about it. LOL.
ya i know, i haven't been around much anymore... but may make a come back, my friends are opening a shop, so i'm a partner so may supe up the max again. As for the wheels, I like them, but not financially afford them. Good luck on the sale though! as for the wheels in my sig, i sold those a few yrs ago...but i found another set...but in 19's and w/ bigger lips...but they need serious TLC before I can put them on.
and Do you think the rust on the RSB has any effect on it's integrity?
Linear Mode
