Am I the only maxima owner in nebraska! - Page 7

maxilac99 · 05-28-2008, 11:36 PM

i have no idea either. on the other hand nissan replaced the axle under warranty. i just had to pay for a new seal and labor ($150 ish). no noise or anything now

jadedmatt · 05-29-2008, 01:57 AM

Quote:

Originally Posted by bigpulve

Matt, Im not sure what we are doing....next weekend is not a good one for me, but maybe the next one after that?

yeah im moving this weekend, so no go for me, im going to be too tired and too busy. but the weekend after that we should do a meet!

i promise i will be there.

Maximeltman · 05-29-2008, 12:24 PM

Sounds good keep me posted or fukc it I'll just be nosing around to see whats up. Just changed my cylinder 2 coilpack $117 from the stealership

but now it's all good. I really need a job so I can get more money to start more modding

TheOne442 · 05-29-2008, 03:17 PM

I'm going to get my starter taken off and checked tonight, kinda hope that's the issue because I don't want to have to try and find some stupid ground or fuse that has kept my car from running/starting since sunday. Any common problems these cars face with starting that anyone has ran into before? I replaced the battery last night and ordered a grounding kit online today.

Maximeltman · 05-29-2008, 03:55 PM

Quote:

Originally Posted by TheOne442

I'm going to get my starter taken off and checked tonight, kinda hope that's the issue because I don't want to have to try and find some stupid ground or fuse that has kept my car from running/starting since sunday. Any common problems these cars face with starting that anyone has ran into before? I replaced the battery last night and ordered a grounding kit online today.

does the starter even crank the flywheel? Does it get power? if not Just take it off yourself and open it up and inspect it. maybe a wire was frayed or something. Also pack some fresh grease in the planetary gears while you got it open.

TheOne442 · 05-30-2008, 10:01 AM

Well the starter was bad and some of the wires where fraying so I just replaced the whole thing, only $119 from autozone. We got it put on and she started right up, but now my check engine light is on. I think I will have to fiddle with the wires to get it to go off, could be the air sensor to.

Maximeltman · 05-30-2008, 01:36 PM

ok good glad it's working

*bigpulve+* · 06-02-2008, 09:15 PM

ok so what are we doing?

maxilac99 · 06-02-2008, 11:44 PM

not sure. but if we have one this weekend i wont be able to attend. i have a show on sunday in Platte City, MO and we are leaving on saturday afternoon..

jadedmatt · 06-05-2008, 01:18 PM

im itch'n for a meet! ha

check this out... i want it!!!

ps... its the 25th anni edition!!! ha ha

http://cgi.ebay.com/ebaymotors/Nissa...ayphotohosting

jadedmatt · 06-08-2008, 10:55 AM

How is everyone after the storm?

Murdashow · 06-08-2008, 02:17 PM

Quote:

Originally Posted by 01Max20thAnni

How is everyone after the storm?

I was cleaning a building about a mile west of where it started, never even heard sirens and found out about it when I woke up a little bit ago.

But I did get hit with hail earlier in the week. Few small dings on the hood, but 3 of them cracked the paint on my roof. That really pissed me off.

*bigpulve+* · 06-08-2008, 09:22 PM

missed my circle by about a block....

maxilac99 · 06-09-2008, 08:02 PM

i was all the way in platte city MO and got the t-storm part of it a day later. the house and my family here were fine though. oh and i took 2nd place in the show

!!!

jadedmatt · 06-11-2008, 12:10 PM

Quote:

Originally Posted by bigpulve

missed my circle by about a block....

Quote:

Originally Posted by maxilac99

i was all the way in platte city MO and got the t-storm part of it a day later. the house and my family here were fine though. oh and i took 2nd place in the show

!!!

good to hear that every one is ok!

congrats max

Maximeltman · 06-12-2008, 07:03 PM

still here. i hate the tornados. too bad for those boyscouts thats messed up.

jadedmatt · 06-13-2008, 08:09 AM

went to KC yesterday and came back this morning, 28mpg average on the interstate, made the trip with ONE tank

akurtzer57 · 06-15-2008, 09:39 AM

Hey havn't posted lately... Give you guys an update. Got my wiring harness for the ECU out and rewired it on some spots. Just have to install, find a 12v supply from the ECCS relay to run to the sub harness for the front 3 injectors. Then install my LM-1 borrow brothers laptop. I should be able to start driving the Maxima daily then. Its been over a year since I could. Debating what you guys think was planning on 14psi and should be high 12s but it seems like I will want more or should I just do that with the 300zx full build and 25psi? like low 11s?

maxilac99 · 06-17-2008, 12:38 AM

i need everyone's help. apparently there is a white 4th gen just like mine use to be (Black Label on the windshield...) running around bellvue causing all sorts of problems and such. so if you see him try and let him know to quit or that i would like to talk to him. cause from what i've found out sarpy co. isnt happy with it and they think its me... thanks for the help in advance...

update on comp's... took 1st in SQ consumer this past sunday

so that brings the total to 2 1st place SQ's, a 1st at Digz car show/comp, 2nd in Platte City, MO and 3rd place in Platte City car show event within the last year and a half. yayy!!

jadedmatt · 06-17-2008, 09:38 AM

Quote:

Originally Posted by maxilac99

i need everyone's help. apparently there is a white 4th gen just like mine use to be (Black Label on the windshield...) running around bellvue causing all sorts of problems and such. so if you see him try and let him know to quit or that i would like to talk to him. cause from what i've found out sarpy co. isnt happy with it and they think its me... thanks for the help in advance...

update on comp's... took 1st in SQ consumer this past sunday

so that brings the total to 2 1st place SQ's, a 1st at Digz car show/comp, 2nd in Platte City, MO and 3rd place in Platte City car show event within the last year and a half. yayy!!

im not in hellevue often, but if i see him i will yell at him.

congrats on the comps!

*bigpulve+* · 06-19-2008, 12:57 PM

we need to do something real soon...................

*bigpulve+* · 06-19-2008, 12:57 PM

oh and turtle you are never getting these wheels back.......I LAWV DEM.

akurtzer57 · 06-19-2008, 06:08 PM

Thought this would be kind of fun. See who has the fastest Nebraska Maxima...Most mods. Bought car for $1700 and now sitting over $8000 on a 1991. Ill start should be like 12.5-12.8 well just wait and see.
Exterior mods
Not sure what brand but my bodykit off my parts car.
Rewired corner lights. Bright at all times.
MSR wheels 215/40/17

Interior
New leather seats
Green bulbs in door panels (kind of pointless)
Short shifter.
MSR wheels (get pics soon as I get a hold of a camera)
215/40/17
3 pod pillar Autometer NV gauges
Narrowband Air/fuel
Boost gauge
Oil pressure gauge

Engine
Cold Air Intake
Cat back splits into dual
Unorthodox Pulley
Magnaflow High Flow Cat
3in exhaust
Fidanza Flywheel
Aimco stage 3 Clucth
T04E Turbo 15psi (custom setup)
Turbo xs dual stage controller
OBX FPR
370cc Brown top Injectors
LM-1 with LMA-2
SAFCII
Strut Bar

Maximeltman · 06-20-2008, 02:00 PM

Interior:
eBay sts cut even further down w/momo knob
umm..ya that's about it

Oh wait, I have fiberglassed speaker pods in both front doors w/active 2-way. RE XXX mids and Rainbow 25 silks. Sounds pretty good. I have them on respective old school PPI Art 225's, or something..
Engine:
nothing really comes to mind. Cattman Y, all the rest is Stillen. Got a leak somewhere also.
I put a Quaiff (Queef) differential in which was a fun job

Suspension:
Illuminas w/stechs
Jclaw Traction bars and OTTO strut bar and cattman rear stabilizer bar actually its a Progress. Same thing.
Exterior:
Clear corners and clear tails, tint all around, debadged. I need to fix some dents but other than that its all good.
I want to get that phelotwhateverthe****itscalled spacer kit for the engine but no money right now, I need to get a 9-5.

*NisMoN00B* · 06-21-2008, 08:07 PM

Quote:

Originally Posted by akurtzer57

Thought this would be kind of fun. See who has the fastest Nebraska Maxima...Most mods. Bought car for $1700 and now sitting over $8000 on a 1991. Ill start should be like 12.5-12.8 well just wait and see.
Exterior mods
Not sure what brand but my bodykit off my parts car.
Rewired corner lights. Bright at all times.
MSR wheels 215/40/17

Interior
New leather seats
Green bulbs in door panels (kind of pointless)
Short shifter.
MSR wheels (get pics soon as I get a hold of a camera)
215/40/17
3 pod pillar Autometer NV gauges
Narrowband Air/fuel
Boost gauge
Oil pressure gauge

Engine
Cold Air Intake
Cat back splits into dual
Unorthodox Pulley
Magnaflow High Flow Cat
3in exhaust
Fidanza Flywheel
Aimco stage 3 Clucth
T04E Turbo 15psi (custom setup)
Turbo xs dual stage controller
OBX FPR
370cc Brown top Injectors
LM-1 with LMA-2
SAFCII
Strut Bar

Pissing contest, FTL.

akurtzer57 · 06-21-2008, 11:11 PM

Quote:

Originally Posted by NisMoN00B

Pissing contest, FTL.

???

Maximeltman · 06-22-2008, 01:44 PM

Quote:

Originally Posted by NisMoN00B

Pissing contest, FTL.

wtf?

akurtzer57 · 06-22-2008, 07:37 PM

Quote:

Originally Posted by NisMoN00B

Pissing contest, FTL.

what is that suppose to mean?

*bigpulve+* · 06-22-2008, 10:07 PM

Dont mind Francis....

Hes just doing it to get at me.....He has a huge ecrush on me....

*NisMoN00B* · 06-24-2008, 07:39 AM

Quote:

Originally Posted by bigpulve

Dont mind Francis....

Hes just doing it to get at me.....He has a huge ecrush on me....

Say my name, say my name. When no one is around you say "baby i love you."

Maximeltman · 06-27-2008, 04:20 PM

Hey you guys! I need to see some of you guys! Whens the next meet or whatever, my car is acting funny. Need to compare with other Maximas!

akurtzer57 · 06-27-2008, 05:08 PM

good luck seeing me havnt made it yet...tuning issues.

Maximeltman · 06-28-2008, 04:42 PM

Ya mine has a bad ac bearing as it turns out...thats why it was makin funny sounds. But damn my bacyard was ****ed up from that storm...spent all day sawing trees an sh!t.

*bigpulve+* · 06-30-2008, 10:37 AM

how about the weekend of the 11th?

Maximeltman · 07-01-2008, 03:04 PM

sounds good pulve lets see how weather turns out.

*bigpulve+* · 07-01-2008, 05:27 PM

yea so it looks like my max will be outta commision for a while....The CF hood somehow unlatched and came flying into my windshield....

jadedmatt · 07-01-2008, 09:24 PM

im up for the 11th.

sorry to hear about the car pulve, hood pins?

*bigpulve+* · 07-01-2008, 09:28 PM

Quote:

Originally Posted by 01Max20thAnni

im up for the 11th.

sorry to hear about the car pulve, hood pins?

hood pins failed....along with the latch....but nothing is broken.....I cant figure it out....

I have photos else where on the .org....

*bigpulve+* · 07-01-2008, 09:31 PM

I found it....

*bigpulve+* · 07-03-2008, 05:03 PM

Alright so the insurance guy came today and they are going to total the car....So that means in the next couple days I will be pulling mods and selling them....You guys will have first dibs on everything....

Mevi with everything to make it work
68 mm throttle body
TS ECU
Redline shifter and E brake boots in black
Redded out outter tail lights
Greddy SP2
Test pipe and warpspeed Y
FX35 projectors in AEed 99 OEM headlights with a PNP kit.
clear corner lights
17" ASA ar1s...The black wheels I had with Sumitomo HP summer tires
17" Kazera KV5s with no tires.
15" sport editions with winter tires