Life of Hornepirates Maxima's and I30
#1
Life of Hornepirates Maxima's and I30
This was my 95 the first day i got it about 3 1/2 ish years ago with 80k on the clock. Sock 95 GLE
First mods I did were added the SE spoiler, Saw Blade 15's and a sun roof wind deflector and window tint
Then I did a poor man HAI and messed around with 3 different sets of rims (pained saw blades, 17" 01 maxima rims, and 17" I30 Chrome rims
Then I decided to stick with the saw blades until i got the car lowered (last Jan) a long with my cat back and other performance mods
After I was dropped (tokico blues and HRs) I found a set of crappy condition Konig Monsoons 17x8s for $80. They were in horrible condition, but I refinished the rims myself and they came out nice. Then I also added Blacked out corner lights which i eventually tinted over.
Shortly after I AEd my headlights and meshed my grill then tinted my tail lights
The way it sits today 1/16/10
Car currently has 110K on the ODO and runs strong
Current mod list:
AE Headlights, Black corners, blacked out parking lights, Smoked tails, mesh grill, 17x8 Konig monsoons w/ sumitomo hrtzII, FSTB, RSTB, Tokico Hp w/ H&R springs, Z32tt FF,PR Cai w/ franken mid pipe, Warpspeed Y pipe, test pipe, 2 1/4 cat back Magnaflow muffler, Koyo aluminum radiator, Amber corner lights, 6k Bi xenon HIDs, Dash mounted Garmin Nuvi 250, DR swtich, Slight weight reduction, and ES front and rear motor mounts
First mods I did were added the SE spoiler, Saw Blade 15's and a sun roof wind deflector and window tint
Then I did a poor man HAI and messed around with 3 different sets of rims (pained saw blades, 17" 01 maxima rims, and 17" I30 Chrome rims
Then I decided to stick with the saw blades until i got the car lowered (last Jan) a long with my cat back and other performance mods
After I was dropped (tokico blues and HRs) I found a set of crappy condition Konig Monsoons 17x8s for $80. They were in horrible condition, but I refinished the rims myself and they came out nice. Then I also added Blacked out corner lights which i eventually tinted over.
Shortly after I AEd my headlights and meshed my grill then tinted my tail lights
The way it sits today 1/16/10
Car currently has 110K on the ODO and runs strong
Current mod list:
AE Headlights, Black corners, blacked out parking lights, Smoked tails, mesh grill, 17x8 Konig monsoons w/ sumitomo hrtzII, FSTB, RSTB, Tokico Hp w/ H&R springs, Z32tt FF,PR Cai w/ franken mid pipe, Warpspeed Y pipe, test pipe, 2 1/4 cat back Magnaflow muffler, Koyo aluminum radiator, Amber corner lights, 6k Bi xenon HIDs, Dash mounted Garmin Nuvi 250, DR swtich, Slight weight reduction, and ES front and rear motor mounts
Last edited by hornepirate; 04-15-2012 at 01:10 PM.
#2
This is another member of the maxima family we've got goin...Its a 99 I30 with about 115k on the odo...picked it up about a year ago for $4k or so and will hav pics of the rest tonight or tomorrow
only mods on the car are 17" G35 Sedan wheels, Body color matched spoiler, 25% window tint and sunroof deflector
only mods on the car are 17" G35 Sedan wheels, Body color matched spoiler, 25% window tint and sunroof deflector
Last edited by hornepirate; 01-17-2010 at 11:01 AM.
#3
This is my brothers 98SE
Mods are, AEM intake, 2.5" Maganflow catback, 18" Murano rims with NExen nitrogen filled tires, AE Headlights, LED Altezzas, 8K HID, Full Memphis sound system with a memphis 12" sub, pioneer amp, and Pioneer Double Din head unit.
Mods are, AEM intake, 2.5" Maganflow catback, 18" Murano rims with NExen nitrogen filled tires, AE Headlights, LED Altezzas, 8K HID, Full Memphis sound system with a memphis 12" sub, pioneer amp, and Pioneer Double Din head unit.
Last edited by hornepirate; 01-17-2010 at 09:29 PM.
#20
minor updates to the car since its been a while. Powder coated the UIM and painted the valve cover lim strut bar etc showing the short ram summer intake but the PR CAI is currently on at the moment. it'll hold me over til the 00vi goes back on this next week.
also did blue led gauges, window switches and clock, need to do the climate control and bose when i get a chance after finals
Nice little interior shot as well
ALSO picked up an 01' GLE for the fiance with 85k on the odo for $5k from a dealer. minor mods more to come
mods are ae headlights
ae tails
smoked corners and rear corners
custom short ram
shaved trunk except burger
(which she did)
also did blue led gauges, window switches and clock, need to do the climate control and bose when i get a chance after finals
Nice little interior shot as well
ALSO picked up an 01' GLE for the fiance with 85k on the odo for $5k from a dealer. minor mods more to come
mods are ae headlights
ae tails
smoked corners and rear corners
custom short ram
shaved trunk except burger
(which she did)
Last edited by hornepirate; 04-15-2012 at 01:21 PM.
#21
slight new addition. took off the konigs and wanted something more light wieght but didnt wanna drop a ton of cash because im getting married in may so I put the saw blades back on and had them done up in semi gloss black with a chromed lip and chrome/black nissan emblem for the center caps.
should i keep the blades or keep the konigs (15.6 lbs vs. 24)
should i keep the blades or keep the konigs (15.6 lbs vs. 24)
#30
Forgot i had this thread but i updated the pics in the begining and why not go ahead and add some new ones.
from what i can tell since my update Ive added the 00vi with prcai then to a longer 3" and now a 3.5" intake also made some homemade polly motor mounts filled with 80a shore polly from mc mastercar. probably a lot more stuff but pics speak more than words
also recently purchased (december) a LC1 innovate and safc2 which i will tune probably in june since ill be done with this semester of college next week.
and made a 3" ID maf. considering making a 3.5" but not sure
Current engine bay pic
My Wifes car is coming along nicely
she tinted her own tails, painted her wheels and AE'd her headlights
We've also blacked out the grill, installed a warpspeed y pipe, g35 muffler, and i made an intake for her car (engine bay pics eventually) Installed a FSTB and did front and rear brakes with brembo blanks and NAPA ADO pads (highly recommend)
from what i can tell since my update Ive added the 00vi with prcai then to a longer 3" and now a 3.5" intake also made some homemade polly motor mounts filled with 80a shore polly from mc mastercar. probably a lot more stuff but pics speak more than words
also recently purchased (december) a LC1 innovate and safc2 which i will tune probably in june since ill be done with this semester of college next week.
and made a 3" ID maf. considering making a 3.5" but not sure
Current engine bay pic
My Wifes car is coming along nicely
she tinted her own tails, painted her wheels and AE'd her headlights
We've also blacked out the grill, installed a warpspeed y pipe, g35 muffler, and i made an intake for her car (engine bay pics eventually) Installed a FSTB and did front and rear brakes with brembo blanks and NAPA ADO pads (highly recommend)
#35
I recently picked up some OEM style Shrties for my car and got them ceramic coated to go along with the 3" obx y pipe
turns out the y pipe is about the same size as my warpspeed except the flange is larger then is shrinks down to 2.23" at the rear flange. OBX dealer wants a 30% restock fee less original shipping plus i cover the cost of shipping so out of the original $220 i would recieve about $100 and lose about $35 for shipping twice. Instead of taking the hit I made an appointment Thursday to get the rear portion of the pipe cut off and replaced with an ACTUAL 3" pipe.
turns out the y pipe is about the same size as my warpspeed except the flange is larger then is shrinks down to 2.23" at the rear flange. OBX dealer wants a 30% restock fee less original shipping plus i cover the cost of shipping so out of the original $220 i would recieve about $100 and lose about $35 for shipping twice. Instead of taking the hit I made an appointment Thursday to get the rear portion of the pipe cut off and replaced with an ACTUAL 3" pipe.
#36
got the manifolds installed as well as the y pipe. I was surprised to see how small the flanges were for the stock manifolds.
I also added hubcentric rings to my wheel which i realized last week I never had ( which is why i had wabble on the highway)
I also added hubcentric rings to my wheel which i realized last week I never had ( which is why i had wabble on the highway)
#40