Jime are you still around? I have a tranny question

Phil

or should i go nos? note i have the vq30de not the 35

Hi Jime, my names josh i live in AZ. I have a stock 1999 maxima se. Would my automatic trany hold for 5 psi of boost with a good tune?

hey jime my names norman.. i love your maxima nice work..i was wondering if you could help me..i have 99 vq30de and wanted to stay with it for now..what would be some good power adders that i can do that wont break me you know and wanted to know how shift point control works and how can i get one or what do i need to make it work lol ty for time god bless

First, sorry I am so slow responding, been in Fl for the past 3 months and little access to internet.

FrankA33 closest track is Cayuga around 2 hours. We will have to hookup for a coffee or something when I get back from Fl, will be home around the middle of April. I spent 25 years in the CF.

RAWLE my slicks are M/T 22x8x15 and I also use M&H 23x8.5x15's as well.

maxi99 it is the stock 95 transmission with a 3500 stall converter. I do leave in in D when racing but I have a Suprastick controller which controls the shift points, currently set at 7000 RPM.

rohanmax14 currently I am running 94 octane (no race gas) at 11.5:1 AFR and 20 deg timing plus 2 step colder iridium plugs and have no problem with running cool. However I now have installed an alcohol injection system and have just purchased some solenoids for alcohol and plan on running pure alcohol for the nitrous vs gasoline so that should make it run much cooler and allow me to raise the timing much higher as well.

5Speedmax14 the Z intake will only fit the 3.5 which I have swapped in. I'm not sure if the cams are still available but search for 350Z cams to see. I am running hotshot headers which include the y-pipe. I live in the northern state of Ontario.

You're from Barrie ? im from Base Borden. Wanted to know where's the closest track ?
Thanks !
Frank

WHAT'S UP MAN WHAT ARE YOU USING FOR SLICK? WHAT SIZE ARE YOU USING?

Hey how are you doing jime. I have a question. I notice that your car is an automatic transmission. I dont know if it's the stock transmission, but when you drag race your car do you just keep it in drive or do you switch gears.

How can u make your stock piston stay cool by running 150 shot I'm sure by running 150 shot piston will get very bad?

How easy is it to fit the 350Z intake manifrold? Does it help significantly? I'm assuming you have a VQ30DE. About the Cams you use. How can I find them on ebay. What item description do they come identified as? I've read that headers help, I've read they don't help unless they are perfectly tuned exact length etc etc. Your take? Do you run a y-pipe? Lots of questions I know but I havee a feeling you have some good answers. What state are you living?
Thanks
Mike