Group Deals / Sponsors ForumFind out more information on group deals that are going on for Maxima parts from our Sponsors.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
ive seen the injen intake for the 2002 model for 270?? what gives
What kind of filter did they have? The AMSOIL Ea Air Filter is good for 4 years, just need to refresh it by hitting it with compressed air stream (oil-less).
I dynoed a stock replacement Ea Nanofiber Air Filter today on my 1998.5 Ford SVT Contour 2.5L V6 daily driver, and realized 6 peak hp, and 8 ft-lbs of tq in the lower end! That is without changing to aftermarket piping... I'll post up my dyno shortly.
I want to explain to you the benefit of the Ea Nanofiber Air Filters. As I mentioned in the last post, I ran 2 dyno runs with the OEM Paper Air Filter, and then swapped in the AMSOIL Ea Nanofiber filter (NO PIPING, just put it back in the stock box). I was expecting a loss of horsepower and torque, thinking that the more tightly woven nanofibers would restrict air flow. This however is completely counter intuitive. I actually gained 6hp at peak rpm of 6200, and also more notably at 3500rpm I realized 8 ft-lbs of torque! Just by changing my STOCK REPLACEMENT FILTER... When you combine that with a freer flowing intake like the INJEN tubing system, this would only be expected to improve further!
What kind of filter did it come with? The AMSOIL Ea Air Filter is good for 4 years, just need to refresh it by hitting it with compressed air stream (oil-less).
I can sell you the filter and test it out, if there isn't a noticeable difference you can send it back and I'll refund you the money. Otherwise, I'd need to find some locals to test this out to get the dyno #'s unless you want to prove it.
I can sell you a replacement filter for your setup then. It surely is worth the added filtration protection for the motor, and any added HP/TQ would be a bonus.
How much for a Amsoil air filter? A cone one to put on my CAI. Zip is 01002. Thanks.
PM sent. The filters go for $42.00 + s.h.
They are good for 4 years or 100k miles and are easy to clean with compressed air, forget about oiling your filter and needing to clean your MAF forever!
I have the Injen RD Series (polished) Intake. Id be willing to swap out the Injen filter for 1 of these! But right now Im looking at a Dragon Filter so its a toss up!
I dont need one, but since people here have doubts about this filter i'd be willing to get one, and give it a shot.
On it's way.
Quote:
Originally Posted by no12run2
I have the Injen RD Series (polished) Intake. Id be willing to swap out the Injen filter for 1 of these! But right now Im looking at a Dragon Filter so its a toss up!
Well let me know if you are interested. PM's work wonders!
Linear Mode
