Group Deals / Sponsors ForumFind out more information on group deals that are going on for Maxima parts from our Sponsors.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
hey, ill take one, send me a PM w/ your paypal addy and ill send money over immediately, send a PM cuz i dont frequent this board as often as i used to...
__________________
Modifications:Cattman Y-pipe, Motostorm UDP, Blehmco Ground Kit, SS clutchline, Autovation Aluminum Pedals, Otto Racing FSTB, Ksport Coilovers, SRE Short Throw Shifter, 00vi
14.521 on street tires
14.42xon drag radials(will update when i get my slips outa my car)
Waiting for a payment confirmation/update/pm reply, thanks.
payment received thank you
Quote:
Originally Posted by Oolatec
Updates, Jared?
i love u oolatec u remind me of what i would be doing
but this is the update according to usps.com they are a day away and i have off on wed or thursday i cant remember but i will have them shiped on wed b for i have to go in work. You guys are great and thank you for the patience!
payment sent, thanks! perfect timing for my damn emissions... haha
__________________
Modifications:Cattman Y-pipe, Motostorm UDP, Blehmco Ground Kit, SS clutchline, Autovation Aluminum Pedals, Otto Racing FSTB, Ksport Coilovers, SRE Short Throw Shifter, 00vi
14.521 on street tires
14.42xon drag radials(will update when i get my slips outa my car)
ok guys everything is a go i just got back from the post office and got finished shipping the sensors to you guys i still have 15 sensors remaining if anyone else is interested. Please post itrader feedback when they are received
ok guys everything is a go i just got back from the post office and got finished shipping the sensors to you guys i still have 15 sensors remaining if anyone else is interested. Please post itrader feedback when they are received
ok guys everything is a go i just got back from the post office and got finished shipping the sensors to you guys i still have 15 sensors remaining if anyone else is interested. Please post itrader feedback when they are received
-Jared
thanx man.. where are you shipping from again, and do you have tracking numbers?
__________________
2003 6 speed TE
Looks: Superwhite LEDs Inside Smoked Side Markers
Performance: Stillen Intake with Custom MAF-TB Pipe, NWP Phenolic Intake Spacers, NWP Block Off Plate, Cattman Gen 3 Headers, Custom 3" Magnaflow Cat-back Exhaust
Suspension: Tokico Illumina Struts, Ebay FSTB, Progress RSB
ok guys everything is a go i just got back from the post office and got finished shipping the sensors to you guys i still have 15 sensors remaining if anyone else is interested. Please post itrader feedback when they are received
-Jared
Alright! cant wait for these bad boys to come in, FINALY il be putting my headers on lol
Thanks Jared, and no problem on the patience, i know you wouldnt leave your org buddies hangin'!
May i ask for a tracking number, if there is one, there's alot of theives around my hood (b/c i live in the hood ahah).
__________________
'01 Merlot SE-SC
Vortech V2 11psi w/ PFTB, Exhaust headers + Megan OE-RS Catback, Apexi Neo, CF Hood, SE-R wheels slammed on D2's, and the list goes on..
'99 Silver SE-L
AE Headlights, AE Wheels, Smoked corner lights, Mini Luda lip, and everything else bone stock..
does it work as sensor 1 of either bank1 or bank 2?
Hey Jared, I don't know much about headers but I was wondering if it says in your initial post "# NOT for primary o2 sensor." does that mean it's referring to either of the sensor 1's in bank 1 or 2? I just figured if you're replacing headers, don't you use the simulator to replace either bank 1 sensor 1 or bank 2 sensor 1, or both? Oh, and I think I read elsewhere about needing to use some resistor in combination with the simulator for the "heater circuit" of the sensor? do these come with any resistors, and if they do what size/spec? Thanks in advance.
-Mario
__________________
1997 Maxima GXE - Auto, Gold - stock
1999 Maxima GLE - Auto, Dark Blue - stock
2002 Maxima SE - Auto, Dark Blue -stock
2002 Maxima GLE - Auto, White (parts car)
2002 Maxima SE - Manual, Royal Blue - bone stock aside from 18" wheels from an '05
2003 Maxima SE - Manual (about time) Sheer Silver - Custom Exhaust, CAI, Fidanza flywheel, Drilled and sloted brake discs, Tint... upgraded to leather interior.
Got mine, thanks! althought the packaging was a bit iffy, my o2 simulator cut open the envelope a bit... lol but its all good! thanks for the quick service! since i didnt see this deal until recently, i only had to wait a few days! haha thanks again!
__________________
Modifications:Cattman Y-pipe, Motostorm UDP, Blehmco Ground Kit, SS clutchline, Autovation Aluminum Pedals, Otto Racing FSTB, Ksport Coilovers, SRE Short Throw Shifter, 00vi
14.521 on street tires
14.42xon drag radials(will update when i get my slips outa my car)
That's for a 5.5 gen...for the 4th gen guys using this in place of their secondary o2, this is how I did it:
-The harness you need is under the carpet under the driver's seat. Remove the seat to get better access. The harness will be a 4-wire connector beneath the big hole in the carpet.
-Note: Do all connections in FRONT of the connector, where the wires are distinctively color-coded. There are four wires: black, white, red, and red/black.
1. The black wire from the o2 simulator TAPS into the black wire on the harness.
2. The red wire from the o2 simulator TAPS into the red/black wire on the harness.
3. The white wire from the o2 simulator (these simulators have two white wires for dual output, just use one and disregard the other. i just cut the extra off) INTERCEPTS the white wire on the harness.
4. The red wire on the harness is left untouched.
5. Make sure to plug the harness back into the o2 sensor so the heater on the o2 works, otherwise you'll throw a CEL for a heater malfunction code.
-Turn the key to "on" and makes sure the little LED on the simulator blinks. Solder all connections, wrap them up, tuck everything under the carpet, reinstall driver's seat. Done!
-Note: This was done on a '97, may be different for other years but I doubt it.
__________________ : Illuminas : Progress : Muranos : Vibrant FSTB : MEVI : NWP Spacers : Budget SS Y : Full SS catback : : I30 Auto-Dim Mirror & Armrest : Maglite Mod : AE Headlights : Red/Clears : 35% Tint : SE Conversion : : LED'd interior : Sony CDX-GT31W & Speakers : Sony XT-100HD : RF Punch HE2 10" 800w : Kenwood 600w :
That's for a 5.5 gen...for the 4th gen guys using this in place of their secondary o2, this is how I did it:
-The harness you need is under the carpet under the driver's seat. Remove the seat to get better access. The harness will be a 4-wire connector beneath the big hole in the carpet.
-Note: Do all connections in FRONT of the connector, where the wires are distinctively color-coded. There are four wires: black, white, red, and red/black.
1. The black wire from the o2 sensor TAPS into the black wire on the harness.
2. The red wire from the o2 sensor TAPS into the red/black wire on the harness.
3. The white wire from the o2 sensor (these simulators have two white wires for dual output, just use one and disregard the other. i just cut the extra off) INTERCEPTS the white wire on the harness.
4. The red wire on the harness is left untouched.
5. Make sure to plug the harness back into the o2 sensor so the heater on the o2 works, otherwise you'll throw a CEL for a heater malfunction code.
-Turn the key to "on" and makes sure the little LED on the simulator blinks. Solder all connections, wrap them up, tuck everything under the carpet, reinstall driver's seat. Done!
-Note: This was done on a '97, may be different for other years but I doubt it.
ur a beast enervine
O and guys please give me i trader feedback when you receive the simulator
Got mine, thanks! althought the packaging was a bit iffy, my o2 simulator cut open the envelope a bit... lol but its all good! thanks for the quick service! since i didnt see this deal until recently, i only had to wait a few days! haha thanks again!
Darn... didn't get mine yet, and I'm the next town over, just West of ya...
Hopefully Monday! I wanna get my headers installed already! hehe
but i will have them shiped on wed b for i have to go in work. You guys are great and thank you for the patience!
triangle with exclamation mark. so it is some type of warning.
Linear Mode
