NWP Engineering VIAS/SSIM Block Plate Kits for only $28.95 - limited time only

[Aaron92SE]

We have recently developed a more cost efficient VIAS Block Plate for those on a budget. Our previous design is still being offered with the raised NWP logo at $60. But the Basic VIAS Block Plate Kits are now in stock and on sale for $28.95 plus shipping.

All kits include the following:

1) One 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum)
2) Three Properly Sized Zinc Plated Flange Bolts
3) One VIAS Control Solenoid Valve Vacuum Cap
4) Printed Detailed Installation Instructions with Photos
5) Two Die Cut Silver Vinyl NWP Engineering Decals





Applications:

* 2002 - 2003 Nissan Maxima (5th generation 3.5L DOHC V6 VQ35DE w/o EGR)
* 2004 - 2008 Nissan Maxima (6th generation 3.5L DOHC V6 VQ35DE with EGR)
* 2002 - 2006 Nissan Altima (3.5L DOHC V6 VQ35DE)
* 2003 - 2007 Nissan Murano (3.5L DOHC V6 VQ35DE)
* 2004 - 2008 Nissan Quest (3.5L DOHC V6 VQ35DE)
* 2002 - 2004 Infiniti I35 (3.5L DOHC V6 VQ35DE)


You can place your order through our website:
http://www.nwpengineering.com/Phenol...ers.html#VIASB

The introductory discounted price is $28.95 plus shipping. Shipping is $6.00 via insured USPS 2-3 day Priority Mail. The duration of the discount has not been set, but it should last for at least 2 weeks.

Please feel free to post any questions or email me.

Thank you,

Aaron Kimball
NWP Engineering, Inc.
www.NWPEngineering.com
252-747-7672
[aaron@nwpengineering.com]

[MIK3]

People should take advantage of this, awesome deal you have going here Aaron.

[Aaron92SE]

Originally Posted by MIK3

People should take advantage of this, awesome deal you have going here Aaron.

Yeah, it doesn't get any better than this!

[eK9aT10pSi]

what is the difference between both of your plates?

[Aaron92SE]

Originally Posted by eK9aT10pSi

what is the difference between both of your plates?

One is fully machined out of a solid piece of 6061 billet aluminum with the NWP logo in raised lettering. This one is $60.00 plus shipping. The quality doesn't get any better than this.

The one that we are offering for sale is machined from a 1/4" sheet of 6061 billet aluminum and the logo is engraved instead of raised. It is then deburred and tumbled to reduce the appearance of machining lines.

Here is a comparison:

Raised logo and fully machined with no machining lines:


Outline engraved from 1/4" sheet stock:

[Fastmax05]

what a deal... i just got his 60 dollar one... piece of art!!!! but for 28.95 hhhah i might have bought that one instead... i mean its HALF THE PRICE LOL...

how about sending me a group of stickers since i missed out on this option LOL

[cfr94]

Aaron, what will this do for gas mileage and where will I see the improvement at??? Very interested. Also you said:

One is fully machined out of a solid piece of 6061 billet aluminum with the NWP logo in raised lettering. This one is $60.00 plus shipping. The quality doesn't get any better than this.

The one that we are offering for sale is machined from a 1/4" sheet of 6061 billet aluminum and the logo is engraved instead of raised. It is then deburred and tumbled to reduce the appearance of machining lines.

So in reality the only difference is raised lettering vs. engraved correct? Same material, same deburring and tumbled on both pieces right? Sorry for all the questions.

[Aaron92SE]

Originally Posted by Fastmax05

how about sending me a group of stickers since i missed out on this option LOL

You want stickers? I'm always happy to send out free stickers for anybody who wants them. All you have to do is send an email to [aaron@nwpengineering.com] with your name and address and I'll send out a pair.

Originally Posted by cfr94

Aaron, what will this do for gas mileage and where will I see the improvement at??? Very interested. Also you said:

One is fully machined out of a solid piece of 6061 billet aluminum with the NWP logo in raised lettering. This one is $60.00 plus shipping. The quality doesn't get any better than this.

The one that we are offering for sale is machined from a 1/4" sheet of 6061 billet aluminum and the logo is engraved instead of raised. It is then deburred and tumbled to reduce the appearance of machining lines.

So in reality the only difference is raised lettering vs. engraved correct? Same material, same deburring and tumbled on both pieces right? Sorry for all the questions.

The change in gas mileage has not been really noted. I would say the change in mileage, if any, is so small that it's tough to prove. But you will lose low end power and gain back plenty of top end power. Some do not notice the loss in low end, especially with a manual transmission.

The biggest difference between the two plates is one has a raised logo and one has an engraved logo. But, the reason the quality of the raised logo plate is so much better is that it is fully machined out of a large block of aluminum. It is machined on all sides, front, and back. The tolerances do not get any better than this. Then it's tumbled and polished by hand.

With the engraved plate, it is simply cut from 1/4" sheet stock. So it is not machined on the front and back to give it a perfect surface. It's plenty flat enough for it to seal on the manifold with a gasket. But you can see the horizontal lines in the material itself. That is because of the extrusion process when they make the raw sheets. You can see these lines in the picture, which I think, don't look bad at all. Especially after it's tumbled and cleaned up by hand.

[cfr94]

Hey thanks for the info Aaron, but I got some more. With me having an automatic, would my mileage increase or decrese with just the plate and would it increase or decrease with the plate and the intake kit combined? Both VIAS plates seal the same correct? I mean the dimensions are identical right?? I don't mind the horizontal lines, I mean it is under the plastic engine cover.

[chillin014]

Awesome deal. I might just pick one of these up! (next week)

[Aaron92SE]

Originally Posted by cfr94

Hey thanks for the info Aaron, but I got some more. With me having an automatic, would my mileage increase or decrese with just the plate and would it increase or decrease with the plate and the intake kit combined? Both VIAS plates seal the same correct? I mean the dimensions are identical right?? I don't mind the horizontal lines, I mean it is under the plastic engine cover.

I apologize for the late reply.

But we have not done any gas mileage testing on just the VIAS Removal. You will lose low end power and gain back plenty of top end power. But the best thing to do is the SSIM. I can't comment on gas mileage changes.

As far as I know, you should not see any noticeable change in gas mileage with the VIAS Removal or SSIM.

And yes, the dimensions are exactly the same. Both plates are perfectly matched to the upper intake manifold and will look VERY clean once installed. One is fully machined with raised lettering and one is cut from 1/4" aluminum with engraved lettering. Same tolerances and same exact dimensions.

[Tippy Toes]

keep up the good work aaron, glad to see someone putting interest in our cars. Hopefully when work comes back around I will be getting some parts through you. Be good and thanks again.

T.T

[cfr94]

Just ordered mine. Decided to go with the raised lettering. May be under the engine cover but if you don't go big, don't go at all right? I'll let you know once I receive it and have pics posted as well hopefully. I plan on putting the intake kit on July 5th so hopefully I can do all of it together.

[Aaron92SE]

Originally Posted by Tippy Toes

keep up the good work aaron, glad to see someone putting interest in our cars. Hopefully when work comes back around I will be getting some parts through you. Be good and thanks again.

T.T

Thank you.

Originally Posted by cfr94

Just ordered mine. Decided to go with the raised lettering. May be under the engine cover but if you don't go big, don't go at all right? I'll let you know once I receive it and have pics posted as well hopefully. I plan on putting the intake kit on July 5th so hopefully I can do all of it together.

Thanks. Please let me know if you have any questions during the install.

[maxximaa]

no love for Canadian maxima?

[Aaron92SE]

Originally Posted by maxximaa

no love for Canadian maxima?

We ship to Canada.

[maxximaa]

that would be $30 shipped right?

[Aaron92SE]

Originally Posted by maxximaa

that would be $30 shipped right?

It's $28.95 plus $6 shipping within the US and $18 for Canada.

[Zack342]

Aaron has anyone ever dynoed to see how much power this adds?