Possible Cattman GD....

*panda_1* · 03-07-2008, 02:03 PM

after a 15 min conversation with brian today about getting a 3 inch catback from him for a 5th gen, he said that if we could get a minimum of 7-8 people interested in it he would be willing to get them made. pricing on the units would not be more than 100 dollars over the price of the 2.5 inch from him already, the benefits for a turbo/ supercharges car would be enormous and for the n/a's it would be a quieter exhaust and from what ive heard from a couple people a slight power gain, so please if you have the slightest interest in it post your name below.

1. Panda_1
2.
3.
4.
5.
6.
7.
8.

please, please, if your interested chime in.

*HNDA ETR* · 03-07-2008, 02:29 PM

when i prototyped the 3" catback for brian, i had lots of people saying that they were interested.... of course when it came time to actually pay money, no one showed...

hopefully you have better luck...

*NmexMAX* · 03-07-2008, 02:32 PM

I'd go for the 3" ID version of it if I could get JUST the b-pipe.

PulsarGTS · 03-07-2008, 03:00 PM

Quote:

Originally Posted by NmexMAX

I'd go for the 3" ID version of it if I could get JUST the b-pipe.

X2

*panda_1* · 03-07-2008, 03:47 PM

id have to bring that up to him, but he did tell me that due to the larger diameter of the pipe a single sleeve would be in used in conjunction with the over i-beam flange, this being due to the fact that with out it, we wouldnt be able to get it to fit. i will call him now and find out if he would be willing to do the b-pipe alone.

*03BlkSETE* · 03-07-2008, 06:19 PM

Why oh why are you doing this! I've had my brand new 2.5 inch Cattman Catback in my garage for over a year and was going to put it on next week because my Greddy was rusting. You're causing a dilemna for me.

*ZIPPIN* · 03-08-2008, 08:21 AM

pics???

Da Russian · 03-08-2008, 09:18 AM

let me know if their might be any word on 4th gen possibly.

thanks

*panda_1* · 03-08-2008, 03:35 PM

pics are not possible at this time due to the fact that these do not eist, there wasnt enough interest for brian to create a batch, the R&D is done all the measurements are there just need a gd to buy them, besides the exhaust will look identical to the 2.5 inch exhaust they have and that many of us have bought and enjoy on a day to day basis except for the sleeve fitting being added. as far as the 4th gen i dont know, i am waiting for brian to chime in on this.

tsaulz · 03-10-2008, 10:12 PM

Quote:

Originally Posted by NmexMAX

I'd go for the 3" ID version of it if I could get JUST the b-pipe.

Same here--but I'd want it for my 4th gen.

*panda_1* · 03-11-2008, 06:35 PM

im still waiting on Brian to chime in with more info on this.

*The Wizard* · 03-11-2008, 06:52 PM

We had a pretty good list going for the 4th gen setup, but it never happened.

Sign up for 95-99 3" Cattman Catback

My offer still stands to help prototype it Brian!

***Cattman*** · 03-21-2008, 06:02 PM

Very sorry to lag like this, I was just going through my junk mail folder and found the link to this thread from Panda 1.

I'll answer the questions that have come up... doesn't exactly look like a tidal wave of interest, but there was another thread that came up when honda etr sold the original 3" prototype to another enthusiast and he installed it. That thread is here: thread about gen5 3" catback.

First, I'll just confirm the information that Panda 1 started this out with, its about all that can be said at this point and he accurately conveyed our discussion about this.

Yes, we'd be glad to sell mufflers and b-pipes seperately. We have to use a clamped slip joint where the rear section goes over the axle (our 2.5" exhaust doesn't require this) but that doesn't affect how the muffler and b-pipe go together.

I'll also remind that there's a big difference between going into production with a part's that already designed (as this one is) and starting from scratch (as we were asked to for the 3" 95-99 catback). If we can identify 7-8 buyers, we'll do a batch of 12-15 units.

Brian C Catts
Cattman Performance

Nightkid08 · 03-23-2008, 10:05 AM

so how much is the total package?

*pbn85* · 03-23-2008, 11:31 AM

count me in for a bpipe ONLY...brian you have pm btw

Nightkid08 · 03-25-2008, 08:17 PM

any update?

*NiSmOVQ35* · 03-26-2008, 06:41 AM

i got 2 people over here ready with $$$ in hand

Nightkid08 · 03-26-2008, 04:30 PM

Keep us updated i will be willing to do this if the price is right

megalos · 03-26-2008, 06:13 PM

yeah i'm looking into getting an exhaust i would be willing to do this as long as i can afford it is there any estimate on the price?

*The Wizard* · 03-26-2008, 06:29 PM

So, has the 3" version for the 4th gen been officially canned Brian? I thought we had a fair amount of interest......

IMO, the 4th gen interest thread belongs here in this forum, not just in the FI section. Maybe ask a mod to kindly move it and we can pick up where we left off?

Thoughts?

Nightkid08 · 03-29-2008, 07:33 PM

any update?

*The Wizard* · 05-04-2008, 11:49 PM

Bump. Any input to my posts #12 and #20 Brian. Still interested.

maxurlife · 05-11-2008, 03:26 PM

Quote:

Originally Posted by panda_1

after a 15 min conversation with brian today about getting a 3 inch catback from him for a 5th gen, he said that if we could get a minimum of 7-8 people interested in it he would be willing to get them made. pricing on the units would not be more than 100 dollars over the price of the 2.5 inch from him already, the benefits for a turbo/ supercharges car would be enormous and for the n/a's it would be a quieter exhaust and from what ive heard from a couple people a slight power gain, so please if you have the slightest interest in it post your name below.

1. Panda_1
2. maxurlife
3.
4.
5.
6.
7.
8.

please, please, if your interested chime in.

I would like to see this deal go down. has there been any updates to it?

S1cTech · 05-11-2008, 04:50 PM

I think Cattmann should give us a group deal, I mean come on, We do deserve it when he charges almost double the price then most other good brands and all we do is recommend his stuff to every maxima owner...Yea its decent quality but the prices need to not break the wallet so much imo...

MorpheusZero · 05-11-2008, 05:00 PM

Pretty sure there's a reason that cattman pieces are more...

maxurlife · 05-11-2008, 05:53 PM

Quote:

Originally Posted by Coremanx