Group Deals / Sponsors ForumFind out more information on group deals that are going on for Maxima parts from our Sponsors.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
VQ 30 and 35 4th and 5th gen Stainless Steel Clutch lines !!
WE NOW OFFERS 1 PIECE CLUTCH LINE FROM MASTER TO SLAV FOR $40 SHIPPED!!! IN STOCK!!
VQ 30 and 35 4th and 5th gen Stainless Steel Clutch lines !!
Hi guys, since derrick is really busy with his thing, I am taking over for now.
GD: Stainless Steel clutch lines for your VQ! They are made by the same company that makes the D.O.T. approved SS brake lines for our cars, Technafit!
It will come with everything pictured, one SS clutch line, 1 banjo bolt, and 2 replacement brand new copper washers!
Great, simple upgrade for your max. Increase the feel and responsiveness of your clutch with these easy to install SS clutch lines. If you are planning on doing a 5sp swap, or plan on changing out the fluid in your clutch these lines will be a cinch for you to install while you're down there.
On to the pricing:
For U.S. residents just $25 including shipping anywhere in the U.S. !!
For Canada $27 including shipping!
For other international orders please PM or email me. Thanks!
Payment info:
pay with CC over the phone please contact us at 19093487277
OUT OF COUNTRY FROM 3/4/2009-3/26/2009
ANY QUESTIONS PLEASE CALL 909-348-7277
OUT OF COUNTRY FROM 7/24/2009-8/10/2009
Please call us if you need any informations on your order status or placing orders
Last edited by AuToMaX_95; 05-27-2009 at 03:44 PM.
For the 5th gen, there are two lower rubber hoses (a divider between the two), one connects to the slave and the other connects to the hardlines... Which does this replace?
Broaner and I installed the SS line on my car last night. It took us forever because of one rusty-a$$ connection on the stock line: where the little hard line meets the short rubber line. It was a true b!tch. Finally I thought to use a big old pipe wrench on one side and we cracked it. (Second time that the pipe wrench has come to the rescue on my Maxima modding!)
We did end up bending the hard line slightly to give us more room to get at the rusty connection, but it was easy to bend back and put it back in the plastic clips to secure it. The Technafit line went in easily and was plenty long. Just make sure you tighten the bolt on the slave cylinder (banjo end) of the line as tight as you can. I thought I tightened it enough at first but when we went to bleed, air and fluid was coming out there. Also, we reused the stock bolt here, not the Technafit bolt. The stock bolt is longer and has a smaller head (12mm stock versus 11/16" for the Technafit bolt), and I do not think it's even possible to use the supplied bolt because the 12mm stock bolt head barely fits in there as is.
As has been noted, the SS line replaces both the long and short rubber lines (between the little hard line and the slave cylinder on the right side of the engine) as well as the metal box thing between the two stock rubber lines. This little box might be some kind of check valve, although I shone I light in there after we got it out and couldn't see anything. Anyway, I assume it's not necessary, and my clutch is working fine without it. Does anyone know more about this box thing?
So we ended up cleaning things up in there quite a bit: removed the box thing and the bracket it was on, and removed another unnecessary bracket which was holding the connection between the hard line and the short rubber line. Probably removed a pound of weight from my engine bay! Not to mention the shiny steel line looks great.
I've only driven a few miles but the clutch does feel better! Definitely more control of clutch engagement and the modulation seems more evenly spread throughout the pedal travel.
Thanks again, Derrick! Best GD customer service ever!
OUT OF COUNTRY FROM 3/4/2009-3/26/2009
ANY QUESTIONS PLEASE CALL 909-348-7277
OUT OF COUNTRY FROM 7/24/2009-8/10/2009
Please call us if you need any informations on your order status or placing orders
Hey Guys, the clutch hose that AutoMax is selling, can it possibly replace a clutch hose in a 4th generation as mine has a small pinhole leak.The hose im looing for is the hose right next to the bleeder screw.Please,i would appreciate some help.
me too $25 shipped right..... And you have them for my 97 maxima..... Im gonna send payment now... But its a echeck so it takes a few days to clear is that ok?
Payment sent.... Hurry... My line is starting to leak pretty bad... Filling the reservoir once every 2-3 days now....
Installed.... Beautiful Product. Works like a dream. Great replacement over stock.
__________________
MODS: I/Y/E, MEVI, JWT ECU, Exedy Stg II, Lightened Flywheel Best on All Season Tires = 14.211 @ 100.25 MPH also at Slippery Falls PB on slicks = 13.870 @ 99.41 mph at Rock Falls Raceway
Last edited by 1chewabacha1; 11-02-2007 at 04:20 PM.
OUT OF COUNTRY FROM 3/4/2009-3/26/2009
ANY QUESTIONS PLEASE CALL 909-348-7277
OUT OF COUNTRY FROM 7/24/2009-8/10/2009
Please call us if you need any informations on your order status or placing orders
Best on All Season Tires = 14.211 @ 100.25 MPH also at Slippery Falls
PB on slicks = 13.870 @ 99.41 mph at Rock Falls Raceway
Linear Mode
