GD: Brembo/RTP zinc plated rotors, Pads, SS lines & Fluid - Page 45

*mrkanda* · 02-26-2009, 10:01 AM

Quote:

Originally Posted by AuToMaX_95

sorry we no longer carry hawk pads, they take forever to get in.
let me know if you want Axxis/pbr Ultimate brake pads

Since you no longer carry Hawk pads where do you suggest getting them? Also, what would be your best equivalent pad for street performance that is like the Hawk HPS? Thanks.

-Mark

***AuToMaX_95*** · 02-26-2009, 01:09 PM

Mark
you can try tirerack, but they normally don't stock all application either.
Axxis/PBR Ultimate brake pads!

*PLUMMAXSE* · 02-27-2009, 01:57 PM

How about a F/R set of Pbr/Axxis Ultimate pads and SS brake lines shipped to 30075!!
Thanks!!

***AuToMaX_95*** · 02-27-2009, 03:27 PM

$175 shipped for everything
Regards

*Progress* · 02-28-2009, 11:03 AM

*PLUMMAXSE* · 03-02-2009, 01:53 PM

[quote=AuToMaX_95;6899845]$175 shipped for everything
Regards[/QUOTE

Paypal sent!

***AuToMaX_95*** · 03-02-2009, 02:53 PM

all p.m replied

Asav · 03-04-2009, 04:34 AM

AutoMax, I'm ready to put in the order below:
RTP Front and Rear Slotted Zink plated rotors
Ceramic pads PBR/AXXIS Front and Rear
Shipped to 19709
For 2006 Maxima SE

THANKS, C
asav1976@yahoo.com

***AuToMaX_95*** · 03-04-2009, 10:22 AM

$335 shipped!

Regards

Asav · 03-04-2009, 11:05 AM

Quote:

Originally Posted by AuToMaX_95

$335 shipped!

Regards

Just talked to you. Thanks bro. Paypal sent. Please let me know tracking number when the order ships.

***AuToMaX_95*** · 03-04-2009, 11:36 AM

no problem

***AuToMaX_95*** · 03-04-2009, 07:28 PM

sorry guys I will be out of the country from till the 26th of march
if any questions or tracking # please call 909-348-7277

sorry for any inconveniences!

mgoriup · 03-04-2009, 08:06 PM

How much would a set of 4 of Brembo zinc plated cross drilled rotors,
shipped to M9A3K6 Canada cost? for an 01 mmax

maxximaa · 03-06-2009, 12:24 PM

sorry and i hope you dont mind me asking some questions

that's real brembo right?

would this be the rear passenger side that i would put it on?

*PLUMMAXSE* · 03-06-2009, 01:11 PM

[quote=PLUMMAXSE;6905943]

Quote:

Originally Posted by AuToMaX_95

$175 shipped for everything
Regards[/QUOTE

Paypal sent!

Got my Brakelines today!! Thanks for the quick shipping! Now I can get to work!!

*SilverGLE* · 03-06-2009, 02:55 PM

Quote:

Originally Posted by PLUMMAXSE

Got my Brakelines today!! Thanks for the quick shipping! Now I can get to work!!

Interesting... I placed my order on February 26 and was told I'd receive shipping confirmation. Didn't hear anything by March 5 so I called and was told their shipping system was down and it would be back up by March 9 at the latest. Funny how you've received yours (I assume you received tracking info upon shipment, as well) and you paid earlier this week.

I'm not pissed, but I am slightly annoyed. And yes, I do realize the person above me may/may not live closer to CA than TN. Usually anything cross-country takes 4-5 business days via Ground.

***AuToMaX_95*** · 03-06-2009, 05:13 PM

Quote:

Originally Posted by SilverGLE

Interesting... I placed my order on February 26 and was told I'd receive shipping confirmation. Didn't hear anything by March 5 so I called and was told their shipping system was down and it would be back up by March 9 at the latest. Funny how you've received yours (I assume you received tracking info upon shipment, as well) and you paid earlier this week.

I'm not pissed, but I am slightly annoyed. And yes, I do realize the person above me may/may not live closer to CA than TN. Usually anything cross-country takes 4-5 business days via Ground.

hi
sorry for any inconveniences, the brake liness/clutch lines we have it in stock for same day shipment, and normally arrives within 3 business days.
For the rotors we are short staff at the moment, thus it takes a big longer time to process. And since i am away from the country it make things a bit more complicated, since i can't supply tracking# * don't have the infos*
Best thing to do is call 909-348-7277 and talk to any rep to get a status of your order. they will assist you instantly.
I do apologize for any delay on any ones order, and things like this we will prevent in the near future!

***AuToMaX_95*** · 03-06-2009, 05:14 PM

Quote:

Originally Posted by maxximaa

sorry and i hope you dont mind me asking some questions

that's real brembo right?

would this be the rear passenger side that i would put it on?

thats brembo and thats rear passenger side rear

*SilverGLE* · 03-08-2009, 08:12 PM

Quote:

Originally Posted by AuToMaX_95

hi
sorry for any inconveniences, the brake liness/clutch lines we have it in stock for same day shipment, and normally arrives within 3 business days.
For the rotors we are short staff at the moment, thus it takes a big longer time to process. And since i am away from the country it make things a bit more complicated, since i can't supply tracking# * don't have the infos*
Best thing to do is call 909-348-7277 and talk to any rep to get a status of your order. they will assist you instantly.
I do apologize for any delay on any ones order, and things like this we will prevent in the near future!

I appreciate the reply. I understand that you're not directly responsible for the delay, as well. I did call and was told the shipping system was down and that it should be back up by tomorrow, so I'm hoping for shipping confirmation either Monday or Tuesday. But it does make more since that the rotors are backordered. Either way, thanks again for the response and I'll post the results regardless.

*essential1* · 03-08-2009, 09:13 PM

I'm not sure if this has been discussed yet, but is there any difference in weight of these rotors compared to stock?

6th gen cross drilled rotors to be specific.

***AuToMaX_95*** · 03-09-2009, 07:24 AM

Quote:

Originally Posted by SilverGLE

I appreciate the reply. I understand that you're not directly responsible for the delay, as well. I did call and was told the shipping system was down and that it should be back up by tomorrow, so I'm hoping for shipping confirmation either Monday or Tuesday. But it does make more since that the rotors are backordered. Either way, thanks again for the response and I'll post the results regardless.

No problem! thank you for your understanding!

Weight is the same as OEM 9.9/10 weight scale

*essential1* · 03-09-2009, 10:18 AM

Quote:

Originally Posted by AuToMaX_95

No problem! thank you for your understanding!

Weight is the same as OEM 9.9/10 weight scale

thanks, so we can still order while your gone correct?

*SilverGLE* · 03-09-2009, 10:31 PM

Quote:

Originally Posted by AuToMaX_95

No problem! thank you for your understanding!

I got a shipping confirmation e-mail today!

I'll update once I receive/install. I'm hoping to get it done Friday or Saturday, depending on the USPS.

*mrkanda* · 03-10-2009, 10:33 AM

Hi,

Can you quote me price and shipping on performance pads F/R for a 2003 Mazda Protege5?

I was thinking to go Hawk HPS but you don't carry those anymore. I also got quotes locally but they only have ceramic and organic. What would be the best performance pad for this application and what are the prices for front and rear? Thanks.

-Mrkanda

*SilverGLE* · 03-11-2009, 09:38 PM

Quote:

Originally Posted by SilverGLE

I got a shipping confirmation e-mail today!

I'll update once I receive/install. I'm hoping to get it done Friday or Saturday, depending on the USPS.

USPS has impressed me, for once! My rotors came today! All looks good, and they should be on the car Friday!

Edit: Got them installed and all is well! Crappy cell phone pic of the RTP front blanks:

Asav · 03-22-2009, 02:34 PM

Automax. Got the slotted rotors and pads for the max and installed them yesterday. Thanks...you're a good seller..

LudaTej · 03-23-2009, 01:41 PM

how much for brembo cross drilled, set of 4, for 98 maxima, shipped to 08854??

LudaTej · 03-23-2009, 07:22 PM

disregard my last post
i read the shipping information on the first thread juss now, shouldve read it the first time around
however i do have a question... are the cross-drilled rotors drilled by brembo or a third party?? do the rotors come with a warranty from brembo??

Eikon · 03-25-2009, 07:41 PM

Jason,

Sounds like you'll be back by tomorrow or so...

When you get a chance, can you get me a quote on the following:

For: 2003 Infiniti I35:

RTP Front and Rear Slotted Rotors
Axxis Ultimate Pads

Shipping to zip 54311
Thanks