t6378tp

iTrader: (69)

Hello,

I am selling a forward feedpipe made to fit on a 4gen maxima, from what I am told it will also fit on a 5gen. You will need to notch the front motor mount and there is a brace that bolts to the tranny. It's made so the turbo will face the headlight. I ran out of o2 bungs and you'll need to get one welded on the front bank the rear has one already but if I get one before it sells I'll install it and raise the price. Also the feedpipe is in two halfs connected by a v-band and has a 38mm wg. The turbo flange is a t4 and is welded to a slip joint so you a rotate and place the turbo in the position you want and either have it welded or get a slip jiont clamp for 12bucks.

I am selling this for 300.00 and open to trades as I need a pearl white or cf hood, tan leather drivers seat, hard a/c line "the one after the low psi valve going into the firewall", 370z rims, vlsd tranny or a safc2/vafc2 "vafc2 with pigtail preferred"

I'll post pic's later but it's just like the feedpipe in my car, if you were at maxus it was the white turbo 4.5gen with orange wheels. The only turbo 4.5gen there

t6378tp

iTrader: (69)

t6378tp

iTrader: (69)

forgot to add I am also looking for a Pathfinder bose 6 disk indash radio setup for a 4gen. I am in the process of removing my system and going back to stock

t6378tp

iTrader: (69)

sold

93altima

iTrader: (5)

damn