Complete 5th gen Turbo Kit

[nismomaxct]

I do not want to sell the kit, but I just found out that my wife is pregnant so it has to go.

The kit has been on my car for under 300 miles so everything is brand new. The kit is made by Turbo Specialties but has been modified to make more power. This kit is a great kit for someone who is just getting into turbocharged Maximas. The kit uses a 3" downpipe and the MAF is on the charged side. In order to reach the full potential of this kit you will need to upgrade the intercooler pipng to 2.5" and a better engine management unit. I will include a box of intercooler piping and a Greddy Emanage (includes main and injector harness) with RC 440cc injectors in the sale of the kit. Once you have this installed and up the boost you can get 350whp out of the car.

As the kit sits right now it makes 260whp and 290wtq at 7psi and reachs full boost around 3000 RPM.

Here is what is included with the Sale:
Garrett GT3071R Turbo
-T04S Compressor Cover with 4" inlet
-.86 A/R Turbine, .50 A/R Compressor
Adjustable Garrett Internal Wastegate
Braided Water Lines
Oil Return and Feed Lines
Modded Motor Mount to Run larger turbo
3" downpipe
Vortech FMU (from Stillen Supercharger kit)
TSI Blow Off Valve
TSI Intercooler
Greddy Emanage Blue with Support Tool, Main Harness, and Injector harness
RC 440cc injectors
Fitting for oil pan

Pretty sure that is everything. The only thing left to mention is that because of the downpipe you will loose your A/C.

I am looking for $2000.

Pics:

Turbo:


Intercooler Piping and MAF:


Intercooler:


Donwpipe:

-The piping in the left side of the picture is the intercoler piping.

[tookrzy4u192]

will this fit a 5.5 gen?

thats a crazy good price! gl with the sale

[Kquezada28]

damn i sooo wish i had money like that right now

[accordingtou]

That is a good price. GLWS

[nismomaxct]

Originally Posted by tookrzy4u192

will this fit a 5.5 gen?

thats a crazy good price! gl with the sale

It should fit, but I would not recommend it with the turbo I am using. It is too small for the 3.5. The company that makes the kit is working on a way to get a bigger turbo. Lets just say that if this does not sell I will be fitting it on a 5.5 gen once I get a bigger turbo.

Thanks for all the kind words guys. I expected most of the comments here to be knocking the kit.

[s1mply_v]

^ Whovever knocks the kit is missing out. I vouch for ya that this kit is legit.

Too bad i couldnt make it earlier that day to see your car on the dyno.

[secondtonone317]

very good price, any pics?

[Stillen Maxima]

Originally Posted by secondtonone317

very good price, any pics?

You already have one

[nismomaxct]

Originally Posted by s1mply_v

^ Whovever knocks the kit is missing out. I vouch for ya that this kit is legit.

Too bad i couldnt make it earlier that day to see your car on the dyno.

Thank you. I am going to try to make it down your way next weekend.


I will have pictures up in about an hour.

[nismomaxct]

Bump! Pictures in the first post. Please excuse the dirty car. Also, the price is firm. This kit plus the cost of all the modifications in order to get it on the car has cost over $4000 and I do not have to sell it.

[J-Rod]

Turbo pretty rusty for 300 miles eh?

[nismomaxct]

Originally Posted by J-Rod

Turbo pretty rusty for 300 miles eh?

Its surface rust. The car did not move for the last three weeks because the downpipe was not finished.

Interested in the kit....

[J-Rod]

Well I might have been, until I saw how close your exhaust is to the ground... that would not work on my daily driver sorry.

[nismomaxct]

Originally Posted by J-Rod

Well I might have been, until I saw how close your exhaust is to the ground... that would not work on my daily driver sorry.

Ok, I understand. I'm on coilovers and I admit that I am sitting a little too low. However, the picture makes the pipe loolk closer to the ground than it really is. I have never had to pipe scrape yet. I have gone over some big speed bumps and there is a lot of construction in my area as well.

[nismomaxct]

BUMP! Anyone interested in this.

[DMAXXX]

You willing to ship to canada

[nismomaxct]

Originally Posted by DMAXXX

You willing to ship to canada

Yep. Get me an address and I can get you a quote. I would love to move this because I have already sold the car.