Partout: 1997 VQ35 Supercharged 5spd
03-10-2009, 06:03 PM
#1
Partout: 1997 VQ35 Supercharged 5spd
Located in the NY Metro Area.
Well the time has come for me to part my car out. I've had more than enough fun in the maxima game, and achieved a couple of things I wanted. I'll still have my 4th gen daily, but the project car has got to go for financial reasons.
The car is currently together, and runs fine aside from the belt squeeling. The car is currently NA and the motor that recently went into the car has seen ZERO boost. I'll post pics as I take them. If you think a price is high, shoot me an offer, I'm flexible for the most part.
I am still in the process of getting the parts off the car, so it will all be off in about a week. I will not be shipping bigger items, motor, rims, hood, etc. unless I don't get any local buyers
l
- **Vids of car in action** -
Car went 13.0 at 116mph with a 2.6 60' w/ a slipping clutch on street tires. Car was good for low 12's even 11's on slicks.
http://members.streetfire.net/uploaded/98MaXeDouT.htm
MY FIRST TRACK RUN EVER LMAO - Peep the insane bog on the launch, and the spinning thru 3rd. lol...
Went up against a modded 335 TT BMW
ADD 3% PAYPAL FEES AND SHIPPING!!!!!!
*2003* Modded VQ35 with 3.0 timing - $1400 NO INTAKE MANIFOLD
-I put down over 400whp with this setup in a diff. motor last year before I totalled my car, and ran it hard with no probs
New Timing chain tensioner and guides
New vq35de headgasket
ARP Rod bolts
ARP Main Bolts
ARP Head studs
350z Revup Cams
PnP LIM
HR Valve Springs and retainers double shimmed (can safely rev to 8k)
Revup Oil Pump
Near-Complete Stillen Vortech V2 Supercharger Kit- $1300
-Stillen V2 Supercharger with 2.87 pulley
-Stillen V2 Plate
-Stillen Idler Pulley
-Stillen Charge Pipe
-T-Rex fuel Pump
-LEXUS TENSIONER PULLEY
-Mounting bolts (may be missing a few 10mm, can get them at home depot)
-Quick Connect Drainback plate and hose
I believe all you need is a few bolts ($20), a BOV ($100), a belt ($20) and a few couplers ($30) and a tensioner bracket ($80)
17"X8" WedSport SA-90 Racing Wheels with near new Toyo Proxe 4's- $1000
Gen 1 Cattman Headers - $500 ***PENDING SALE***
Cattman SS Y-Pipe- $150 ***PENDING SALE***
-Small dent in the bottom of the y-pipe from bottoming out
NWP Thermolic Spacer Kit - $140 (missing TB spacer)
MINT Full Black 4th gen Leather Interior including door panels, headliner, and seatbelts - $400
COMPLETE 300zx Aluminum Big Brake kit w/ 12.6" rotors - $475
-Complete kit, calipers painted black, comes with brackets pads and rotors
-Including Stainless Steel Lines
4th Gen Custom Chassis Brace -$100
-Looks exactly like a harness bar, but near the floor, made from black 2" steel tubing
- Goes from passenger to driver side seatbelt bolts on rear floor.
- Molded over "hump" in backseat floor
Complete 1997 Maxima Bose System HU and Speakers - $100
-Comes with all speakers, all mint. Headunit is missing the "3" button, everything works fine
Black Steering wheel without Airbag -$90
Stock 3.5 Oil Pump - $40
Autometer Vacuum/Boost Gauge - $40
-Comes with vacuum line
3.0 short ram intake with filter - $40
-Used while I was NA
3.0 MAF -$40
Unorthodox lighweight 3.0 Crank Pulley - $150
-Lightweight crank pulley, stock diameter NOT UNDERDRIVE so great for a supercharger too
NISMO black Knockoff shift **** - $15
Entertaining offers on shell, or semi-complete car.
If anyone needs help with installation, PM ViperVadim for special rates, and installation prices.
I will constantly update this thread as I take pictures and find more parts lying around. If you don't see something, feel free to ask me. Almost all the prices are OBO, and I will entertain all offers, just don't throw me any ridiculous lowball offers. Like I said, I forgot a MILLION things, so ask if you don't see. If you REALLY need a pic of something, let me know and I can get it up.
Most parts are still on the car, so i may need some time to remove them. Thanks again and happy hunting.
Well the time has come for me to part my car out. I've had more than enough fun in the maxima game, and achieved a couple of things I wanted. I'll still have my 4th gen daily, but the project car has got to go for financial reasons.
The car is currently together, and runs fine aside from the belt squeeling. The car is currently NA and the motor that recently went into the car has seen ZERO boost. I'll post pics as I take them. If you think a price is high, shoot me an offer, I'm flexible for the most part.
I am still in the process of getting the parts off the car, so it will all be off in about a week. I will not be shipping bigger items, motor, rims, hood, etc. unless I don't get any local buyers
l
- **Vids of car in action** -
Car went 13.0 at 116mph with a 2.6 60' w/ a slipping clutch on street tires. Car was good for low 12's even 11's on slicks.
http://members.streetfire.net/uploaded/98MaXeDouT.htm
MY FIRST TRACK RUN EVER LMAO - Peep the insane bog on the launch, and the spinning thru 3rd. lol...
Went up against a modded 335 TT BMW
ADD 3% PAYPAL FEES AND SHIPPING!!!!!!
*2003* Modded VQ35 with 3.0 timing - $1400 NO INTAKE MANIFOLD
-I put down over 400whp with this setup in a diff. motor last year before I totalled my car, and ran it hard with no probs
New Timing chain tensioner and guides
New vq35de headgasket
ARP Rod bolts
ARP Main Bolts
ARP Head studs
350z Revup Cams
PnP LIM
HR Valve Springs and retainers double shimmed (can safely rev to 8k)
Revup Oil Pump
Near-Complete Stillen Vortech V2 Supercharger Kit- $1300
-Stillen V2 Supercharger with 2.87 pulley
-Stillen V2 Plate
-Stillen Idler Pulley
-Stillen Charge Pipe
-T-Rex fuel Pump
-LEXUS TENSIONER PULLEY
-Mounting bolts (may be missing a few 10mm, can get them at home depot)
-Quick Connect Drainback plate and hose
I believe all you need is a few bolts ($20), a BOV ($100), a belt ($20) and a few couplers ($30) and a tensioner bracket ($80)
17"X8" WedSport SA-90 Racing Wheels with near new Toyo Proxe 4's- $1000
Gen 1 Cattman Headers - $500 ***PENDING SALE***
Cattman SS Y-Pipe- $150 ***PENDING SALE***
-Small dent in the bottom of the y-pipe from bottoming out
NWP Thermolic Spacer Kit - $140 (missing TB spacer)
MINT Full Black 4th gen Leather Interior including door panels, headliner, and seatbelts - $400
COMPLETE 300zx Aluminum Big Brake kit w/ 12.6" rotors - $475
-Complete kit, calipers painted black, comes with brackets pads and rotors
-Including Stainless Steel Lines
4th Gen Custom Chassis Brace -$100
-Looks exactly like a harness bar, but near the floor, made from black 2" steel tubing
- Goes from passenger to driver side seatbelt bolts on rear floor.
- Molded over "hump" in backseat floor
Complete 1997 Maxima Bose System HU and Speakers - $100
-Comes with all speakers, all mint. Headunit is missing the "3" button, everything works fine
Black Steering wheel without Airbag -$90
Stock 3.5 Oil Pump - $40
Autometer Vacuum/Boost Gauge - $40
-Comes with vacuum line
3.0 short ram intake with filter - $40
-Used while I was NA
3.0 MAF -$40
Unorthodox lighweight 3.0 Crank Pulley - $150
-Lightweight crank pulley, stock diameter NOT UNDERDRIVE so great for a supercharger too
NISMO black Knockoff shift **** - $15
Entertaining offers on shell, or semi-complete car.
If anyone needs help with installation, PM ViperVadim for special rates, and installation prices.
I will constantly update this thread as I take pictures and find more parts lying around. If you don't see something, feel free to ask me. Almost all the prices are OBO, and I will entertain all offers, just don't throw me any ridiculous lowball offers. Like I said, I forgot a MILLION things, so ask if you don't see. If you REALLY need a pic of something, let me know and I can get it up.
Most parts are still on the car, so i may need some time to remove them. Thanks again and happy hunting.
Last edited by 98MaXeDouT; 03-30-2009 at 09:07 AM.
03-10-2009, 06:27 PM
#3
03-10-2009, 07:48 PM
#8
