http://forums.maxima.org Nissan Maxima Enthusiasts Site en Fri, 20 Nov 2009 21:38:18 GMT vBulletin 20 http://forums.maxima.org/images/misc/rss.jpg http://forums.maxima.org http://forums.maxima.org/wheels-tires/603221-5zigen-gravis-20x8-5-9-5-38-45-850-a.html Fri, 20 Nov 2009 21:37:46 GMT Up for sale is a set of 20" 5ZIGEN GRAVIS. I bought these online back in the spring with plans to change my setup for the summer. I got busy and they are still sitting in the garage. New plans now, so they must go!

Size/offset:
20X8.5 (38)
20X9.5 (45)

Bolt pattern:
5X114.3

The wheels are silver with a diamond cut polished face. The rear wheels are brand new and never used. The fronts were used on a 5ZIGEN sponsored show car and were only used to and from events.
The only blemish is one of the fronts has some sort of issue underneath the clearcoat in one spot that is visible in the pics.
Overall a nice quality set of wheels at a great price for 20's!

$850 + shipping.
Add fees if using Paypal.

Location: Decatur, AL
Please PM or reply if interested
Kraazyj@hotmail.com





]]> Wheels/Tires 400DGRZ http://forums.maxima.org/wheels-tires/603221-5zigen-gravis-20x8-5-9-5-38-45-850-a.html http://forums.maxima.org/members-rides/603220-finally-got-new-pics-my-car.html Fri, 20 Nov 2009 21:07:16 GMT i had a few people asking me to put up pics so here we go! Image: http://i20.photobucket.com/albums/b247/occhoppersb418/new%20bmw/DSC01330.jpg ... i had a few people asking me to put up pics so here we go!



]]> Members Rides Drockb418 http://forums.maxima.org/members-rides/603220-finally-got-new-pics-my-car.html http://forums.maxima.org/audio-electronics/603219-1-ohm-sub.html Fri, 20 Nov 2009 21:04:19 GMT I found a 1 ohm sub on crutchfield.com that i am thinking about getting to replace my stock Bose sub. I think it should work but i want to get some... I found a 1 ohm sub on crutchfield.com that i am thinking about getting to replace my stock Bose sub. I think it should work but i want to get some oppinions first. heres the link...

http://outlet.crutchfield.com/p_108K...l?cc=02&tp=111 ]]> Audio and Electronics 6SPD02SE http://forums.maxima.org/audio-electronics/603219-1-ohm-sub.html http://forums.maxima.org/4th-generation-classifieds-1995-1999/603218-fs-2-dek-lower-intake-manifolds.html Fri, 20 Nov 2009 21:01:19 GMT I have to lower intake manifolds with stripped bolt holes in them. Both would need new threads put in at least 2 of the bolt holes. These would be... I have to lower intake manifolds with stripped bolt holes in them. Both would need new threads put in at least 2 of the bolt holes. These would be good for test fitting or even porting out and installing on you VI kit. I've seen people grind their UIM down a little to make the bolt sit lower which would eliminate the need to fix the threads. Im looking to get $30 shipped each. I'll have pictures up soon. ]]> 4th Generation Classifieds (1995-1999) ajcool2 http://forums.maxima.org/4th-generation-classifieds-1995-1999/603218-fs-2-dek-lower-intake-manifolds.html http://forums.maxima.org/4th-generation-classifieds-1995-1999/603217-fs-aftermarket-cat-back.html Fri, 20 Nov 2009 20:59:37 GMT I have a pacetter 2.5inch cat back the muffler has a small hole in it but u can always get a different muffler like a dynamax or somethin. Im looking... I have a pacetter 2.5inch cat back the muffler has a small hole in it but u can always get a different muffler like a dynamax or somethin. Im looking for something like 200 shipped
I am also willing to ship the catback without a muffler for 150 shipped
Pm me




]]> 4th Generation Classifieds (1995-1999) VQphantom http://forums.maxima.org/4th-generation-classifieds-1995-1999/603217-fs-aftermarket-cat-back.html http://forums.maxima.org/4th-generation-maxima-1995-1999/603216-new-vss-but.html Fri, 20 Nov 2009 20:33:25 GMT i had a p0500 code and i replaced the VSS sensor. i have a code reader (scan gauge 2, good stuff, by the way) that also reads some of the stuff... i had a p0500 code and i replaced the VSS sensor.

i have a code reader (scan gauge 2, good stuff, by the way) that also reads some of the stuff the ECU monitors (intake temp, water temp, and so on). after i replaced the VSS sensor, i plugged the reader in, cleared the code and took a short drive. for the first minute, everything works, then i noticed the "mph" is "0", meaning the ECU is not getting data from VSS (my guess).

according to the code reader, my ECU is not getting any "speed" data because the "mph" is showing "0". the odd thing is, my speedometer still works. i don't understand how this is happening. any idea?

the test drive is short, so it didn't trigger the p0500 code, but i'm sure if i drive it long enough, the p0500 code will come on again. anyone has any idea what i'm dealing with here?

thanks. ]]> 4th Generation Maxima (1995-1999) hahaha http://forums.maxima.org/4th-generation-maxima-1995-1999/603216-new-vss-but.html http://forums.maxima.org/general-maxima-discussion/603214-nissan-extends-cvt-warranty-10yr-120k.html Fri, 20 Nov 2009 20:12:32 GMT We received an important piece of mail from Nissan Headquarters with regard to my wife's 2008 SER with CVT and we just got it today, 11-20-09.

They have extended the warranty on CVT transmissions to 10 years, 120,000 miles and will reimburse customers who paid for repairs or replacement of a CVT even if they no longer own the car as long as the warranty extension would have covered their car had it been in force sooner.

Nissan CVT Customer Service Center: 888-388-0318

Deadline for submitting Reimbursement Claim Form: July 31, 2010.

Nissan provided a sticker to be applied onto the warranty booklet.

The warranty extension is effective immediately as well as retroactively.

Nissan says they have taken this action to show their confidence in the CVT technology and to show their commitment to stand behind their products.

My wife's CVT has been faultless and impressive in its operation and we had no complaints or communications with Nissan. They have acted on their own. ]]> General Maxima Discussion FloydMax http://forums.maxima.org/general-maxima-discussion/603214-nissan-extends-cvt-warranty-10yr-120k.html http://forums.maxima.org/4th-generation-maxima-1995-1999/603213-ck-engine-light-vsc.html Fri, 20 Nov 2009 20:01:13 GMT I'll try to be brief, yet give enough info to ask for y'alls help... 1996 Maxi SE 5seed. Check engine light after starter replacement and induction clean/service(checked connections/hoses in drivers firewall area ;). Technician scanned error and said VSC (VSS)error...light on but no other performance issues other than cruise control won't indicate/engage now. He re-set erro light but said it would return after 2nd start...it did,after a short drive! Does the VSS have a wire connection on topside/rearward of my manual tranny with a "plug-in"/spade connection held in w/ one (10MM?) bolt?? If anyone has VSS part ## to share with info, it would be greatly appreciated!!!!!!! :kiss:
Thank you,
Doug Parker ]]> 4th Generation Maxima (1995-1999) packerZ http://forums.maxima.org/4th-generation-maxima-1995-1999/603213-ck-engine-light-vsc.html http://forums.maxima.org/4th-generation-maxima-1995-1999/603212-am-i-being-ripped-off.html Fri, 20 Nov 2009 19:45:42 GMT So I took my car to my mechanic 2 days ago to check out an oil leak. I thought it was the crank seal at first, since it was leaking from the... So I took my car to my mechanic 2 days ago to check out an oil leak. I thought it was the crank seal at first, since it was leaking from the passenger side of the engine but it turns out it wasn't the seal, it was the rear valve cover gasket, and the front one is looking pretty bad as well. He quoted me $250 to replace both valve cover gaskets. I want to know if that's a decent price or not. ]]> 4th Generation Maxima (1995-1999) 96WhiteMaxima http://forums.maxima.org/4th-generation-maxima-1995-1999/603212-am-i-being-ripped-off.html http://forums.maxima.org/5th-generation-maxima-2000-2003/603210-i-am-thinking-buying-2002-se.html Fri, 20 Nov 2009 18:17:15 GMT I found a 2002 SE, cloth seats, lights, cruise,windows, and a/c all work. The tires will need to be replaced within the next 4 months. It has 174k... I found a 2002 SE, cloth seats, lights, cruise,windows, and a/c all work. The tires will need to be replaced within the next 4 months. It has 174k miles. Clean body, interior and engine bay. Paint still glossy with only one visible door ding. It does have the oil gasket leak problem though. The condition of the car is pretty good. Tags are good and the title is clean.

I would like to know what everyone thinks it is worth?
Here is a pic of the vehicle.

http://forums.maxima.org/picture.php...ictureid=12327


thanks........... ]]> 5th Generation Maxima (2000-2003) 02_Maxima_6sd http://forums.maxima.org/5th-generation-maxima-2000-2003/603210-i-am-thinking-buying-2002-se.html http://forums.maxima.org/4th-generation-maxima-1995-1999/603209-my-retro-projectors-pics.html Fri, 20 Nov 2009 18:00:03 GMT I've had these for a long time actually... but I do not think I ever shared with the org.
These pics are a bit old but i havnt changed anything so here they are:




]]> 4th Generation Maxima (1995-1999) udienow http://forums.maxima.org/4th-generation-maxima-1995-1999/603209-my-retro-projectors-pics.html http://forums.maxima.org/4th-generation-maxima-1995-1999/603208-car-hesitating.html Fri, 20 Nov 2009 17:54:08 GMT Folks of the MAX. I am experiencing possible engine trouble. (no codes) First, this has happened to me once before. Poor choice of gas. 93 from... Folks of the MAX. I am experiencing possible engine trouble. (no codes) First, this has happened to me once before. Poor choice of gas. 93 from Walmart. Normally, it's good gas, I guess it just so happened to be not that day. Drove the car around for the day, went home, shut down and did not start back up until the next day, later in the evening. Then the car started to sputter. Thinking this was the exact experience I had with bad gas during the summer, I put in Stabilizer in the tank. Thinking this would have worked, nope. But, the very next day, started the car and it was fine. (still no codes) Well, over a course of 24 hrs, it started again upon starting the engine. (no codes) Ok. This is what I did for the past two weeks until now:
Changed the spark plugs, Ran Sea Form through the break line to the engine, changed out the air filter, fuel filter, oil change - including oil filter change, too, PVC valve, cleaned the TBI, cleaned the MAF sensor and then still no change.
I was suspecting KS or O2 sensor but I am not getting any codes. Check engine light not on.
Could be timing out, don't know enough about the 4th generation engine. So, guys and gals, can you help this old timer out? ]]> 4th Generation Maxima (1995-1999) blkmaxz95 http://forums.maxima.org/4th-generation-maxima-1995-1999/603208-car-hesitating.html http://forums.maxima.org/4th-generation-classifieds-1995-1999/603207-wtb-factory-unlock-lock-remote-alarm.html Fri, 20 Nov 2009 17:35:24 GMT jus like the title says!!!! jus like the title says!!!! ]]> 4th Generation Classifieds (1995-1999) Maximus681 http://forums.maxima.org/4th-generation-classifieds-1995-1999/603207-wtb-factory-unlock-lock-remote-alarm.html http://forums.maxima.org/6th-generation-classifieds-2004-2008/603206-wanted-driver-side-transmission-mount-bracket.html Fri, 20 Nov 2009 17:25:39 GMT for a 2005 auto transmission. Used is fine - if you have one please let me know! Thanks. for a 2005 auto transmission. Used is fine - if you have one please let me know! Thanks. ]]> 6th Generation Classifieds (2004-2008) dummy76 http://forums.maxima.org/6th-generation-classifieds-2004-2008/603206-wanted-driver-side-transmission-mount-bracket.html http://forums.maxima.org/6th-generation-classifieds-2004-2008/603205-f-s-04-max-se-oem-springs.html Fri, 20 Nov 2009 17:19:42 GMT I have my OEM springs off of my 04 Max SE...Perfect shape, no rust or anything like that..Good buy for those who live in new england and wanna put... I have my OEM springs off of my 04 Max SE...Perfect shape, no rust or anything like that..Good buy for those who live in new england and wanna put these on for the winter. Need some extra cash.. Im asking $80 picked up. (In CT)




]]> 6th Generation Classifieds (2004-2008) Nismo_max04 http://forums.maxima.org/6th-generation-classifieds-2004-2008/603205-f-s-04-max-se-oem-springs.html