Detailing Discuss how to make your car sparkly clean for car shows, local meets, or any other reason. What products do others use and how do we get them? Get your questions answered in here.

how long should I leave it on?

Thread Tools
 
Search this Thread
 
Old 11-06-2004, 05:36 PM
  #1  
Senior Member
Thread Starter
 
my99maxisnice's Avatar
 
Join Date: Jul 2003
Posts: 1,334
how long should I leave it on?

Tomorrow, hopefully, I'm going to detail the max again. I've done it once before, but wasn't sure if I had the right technique. I use Meguiars Step 1, followed by their yellow #26. I was wondering after applying it on the car, how long I sh ould wait to remove it for each product, or if they're just a wipe on, wipeoff product. Thanks.

Ryan
my99maxisnice is offline  
Old 11-07-2004, 03:47 AM
  #2  
Donating Maxima.org Member
 
SilverBelle04's Avatar
 
Join Date: Apr 2004
Posts: 840
They're not wipe on / wipe off. It'll depand on the weather conditions, hot/cold/ humid, etc.....But let it dry for + or - 15/30 minutes and then remove. It should be ready to buff when you can rub your finger on it and it removes easily without streaking. Apply in very "thin" coats. "Less is more" when it comes to waxing.

Bob
SilverBelle04 is offline  
Old 11-08-2004, 08:21 PM
  #3  
Senior Member
 
white95max's Avatar
 
Join Date: Dec 2002
Location: Stevens Point, WI
Posts: 883
I would think the directions would be on the bottle as to how long to let the product dry. In most cases with wax, you can remove them too early, but not too late. Last year when I was using Meg's NXT, I applied it at like 8:00PM, and removed it when I woke up in the morning. It still came off pretty easily, and it was very slick. You can be sure it had enough time to dry!
If you don't know how long to let it dry, I'd just say to wax the whole car, then wait 20 minutes and remove it.
As far as polishes, you don't need to wait at all. In fact you should only do one section at a time with a polish. Do a door or half of a door and remove right away.
white95max is offline  
Old 11-08-2004, 08:30 PM
  #4  
Wat
iTrader: (4)
 
E55AMG2's Avatar
 
Join Date: Jan 2002
Posts: 5,188
You will want to use Step 2, then #7, THEN #26 for a much better job. Also, dont forget to clay out the rough spots....
E55AMG2 is offline  
Old 11-08-2004, 08:45 PM
  #5  
Senior Member
 
white95max's Avatar
 
Join Date: Dec 2002
Location: Stevens Point, WI
Posts: 883
Yes, #7 produces a beautiful look. #26 is a pure wax so it won't remove any of the #7.
white95max is offline  
Old 11-08-2004, 09:53 PM
  #6  
Senior Member
Thread Starter
 
my99maxisnice's Avatar
 
Join Date: Jul 2003
Posts: 1,334
Yeah this wasn't a full detail, just a quickie in case this was the last warm weekend for a while. i'll post pics when i have time to take them, turned out pretty good.
my99maxisnice is offline  
Old 11-09-2004, 04:13 PM
  #7  
Wat
iTrader: (4)
 
E55AMG2's Avatar
 
Join Date: Jan 2002
Posts: 5,188
waiting.....
E55AMG2 is offline  
Old 11-10-2004, 12:25 PM
  #8  
Senior Member
Thread Starter
 
my99maxisnice's Avatar
 
Join Date: Jul 2003
Posts: 1,334
pics are here

http://www.cardomain.com/memberpage/414591/7

Car domain sucks, they condense all the pics, but they're there nonetheless.
my99maxisnice is offline  
Old 11-10-2004, 03:08 PM
  #9  
Senior Member
 
white95max's Avatar
 
Join Date: Dec 2002
Location: Stevens Point, WI
Posts: 883
[QUOTE=my99maxisnice]...in case this was the last warm weekend for a while.QUOTE]

???
You're in Georgia! What's it gonna be...60 degrees???
white95max is offline  
Old 11-10-2004, 03:15 PM
  #10  
Senior Member
Thread Starter
 
my99maxisnice's Avatar
 
Join Date: Jul 2003
Posts: 1,334
ha, yeah, I was wrong. Oh well.
my99maxisnice is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM
MaxLvr21
5th Generation Maxima (2000-2003)
14
10-17-2015 12:11 PM
BobTX10
8th Generation Maxima (2016-)
14
10-07-2015 08:43 AM



Quick Reply: how long should I leave it on?



All times are GMT -7. The time now is 01:10 PM.