Looking to obtain the stock matte look on my '04 dash
#1
Looking to obtain the stock matte look on my '04 dash
I made the mistake of using armorall on my '04 max's dash, and now I am trying to get it off and obtain the original matte look. I used cleaner, both lexol leather cleaner and some other crap i bought. It looks better but now its gettign a little spotty, like I can still see the old oils and crap spread out over it.
What can I use to get all the crap out but still keep protectants on it?
thanks.
What can I use to get all the crap out but still keep protectants on it?
thanks.
#2
Amorall used to make a matte finish protectant, but they don't anymore. They do make a cleaner that leaves a matte finish (that's what I use on my 04 max dash). You might try that, it should clean the dash and leave more of a matte finish.
#4
If you ever use a protectant that seems to give you a finish that is too shiny, try buffing it lightly with a microfiber cloth. Sometimes this will help even after it has dried, but usually buffing it a bit just after it is applied helps.
You can also wipe it down a bit with some dish detergent solution. Just make sure you rinse too.
You can also wipe it down a bit with some dish detergent solution. Just make sure you rinse too.
#7
Guest
Posts: n/a
I recommend 1Z Cockpit Premium. It is a MATTE finish. Click Click here for 1Z Cockpit Premium It is made to leave a matte NON shiney finish. It will cut through the Arourall. It might take two times but I am sure you will LOVE it.
Jon
Jon
#8
Get a scouring pad called the "Dobie", they are with the dish sponges.
Use this with your favorite interior cleaner (6:1 water:woolite works well).
That will clean all the old ArmorAll off so you can start over.
Use this with your favorite interior cleaner (6:1 water:woolite works well).
That will clean all the old ArmorAll off so you can start over.
Thread
Thread Starter
Forum
Replies
Last Post