Dealership and Vendor ExperiencesLet other Maxima owners, or potential Maxima owners, which dealerships and shops you've had good or bad luck with.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
Cant say enough about Marty at Raxles. Upon high recomendations from other Org members I decided to check them out. Verrrry high quality product, packaged well, came on time, and Marty was extremely helpful through the whole process giving me tips on installation. Cant wait to get them on the car, thanks Marty!
Grant
__________________
WSP Y/B pipe, RT Cat, Stillen muffler, Exedy Stage 1 clutch, Progress RSB, Stillen FSTB, Z32 30mm aluminum 4-piston calipers, 300ZX cross-drilled and slotted rotors, SS brake and clutch lines, D2 coilovers, 19x8.5 SSR Competitions wrapped with BFG KDW2s, B&M STS, traction bars, 1st cefiro/projector retrofit, 1st 4th gen w/ Truax stage 3 SFCs, DTM tails, Corbeau CR-1 Seats, coated in Obsidian Metallic Pearl
Marty at raxles is in business to sell quality parts and back them up with superior customer service! The rest is all commentary.
__________________
"You can lead a horticulture, but you can't make her think."
96 I30, Roll bar, Built tranny,11.5 lbs of dynoed SC boost with aftercooler & vortech mustang internals, 75 shot N2O, , built engine 9:1 compression,JWT cams,valve sprgs,vq30 DET pistons,shot peaned rods,ported & polished gasket matched exh and intake manifold, intake is extrude honed.
Many more
I wanted to express my gratitude towards Marty as well. I was in a bind, and needed to try another axle out in my car, and he was nice enough to send me another axle free, which I just finally shipped back to him. I must say service is excellent, and I will not hesitate to shop with him again.
Thanks Marty!
__________________
-----5-speed DE-K with 205 whp and 199 wtq SAE corrected-----
-------Shortened Koni Yellows/Eibachs, Cobra/Q45/Hawk/SS-------
--SFC S.2, LTB S.2, RSB, FSTB, TB's (removed!), all ES bushings--
-------------Enkei RPM2/Michelin Pilot Sport A/S Plus-------------
Raxles are definatly a quality product. I've had mine for about 3 years now and they have held up against alot of abuse. If your looking for axles this is the place to go with.
i just got off the phone with marty because my passenger axle is acting up. I thought that this phone call would have been long and confusing and costing me all sorts of headaches because i'm not sure where my invoice is. But he looked me up in the computer, noted that i had bought both passenger and driver side. Told me to send it back and he'll do whatever it takes to fix it. +1 for marty!!!
To all who had good results... how low are your cars? I've been told many times that the reason I go through axles like pancakes cause of my lowered suspension and aggressive driving. Most of the time the boot rips then without me knowing the bearings are making noise...
__________________
98 Nissan Maxima GXE
Proud member of RenditionS C.T.C. and LBR (Low Budget Racing)!!!!
Linear Mode
