|
Q45/J30 Calipers + Torque member
Whats up guys!
I have a set of working J30/Q45 calipers. I ran them for about 2 weeks but i decided that wasnt the route i wanted to go. I decided to go for the Z32/Cobra BBK.
These calipers are good, little dirty, come with the torque member and sliders. The torque members are only good if you have J30/Q45 pads though. The benefit of these over the Z32 is they WILL clear ANY 15 or 16" wheel. I had them on my stock 16's. The stopping power is much better over stock too, when i swapped back to stock the brakes didnt feel as "Grabby" as they were with the Q45 calipers.
Asking 100 and ill throw in some braided stainless steel lines. Perfect upgrade for those needing new calipers. 100% bolt on if you use the A32 torque member..may require a small amount of grinding depends sometimes you wont need to.
__________________
VQ30DE T - Holset HE351, Tial 38MM, HKS SSQ, MEVI, 3" Turbo back, Tein Coilovers, 17" Superleggeras, Full Z32 BBK
"Because boosted is beter.."
|
Linear Mode
