Remote Start

hotrod37 · 10-23-2009, 12:40 PM

I am trying to install a audiovox/prestige 620 remote start in my 2002 maxima and I have some trouble with the lock and unlock wires. While i can find them in the door running the wires from the passenger compartment to the door seems to be a problem. is there a way to wire the open/close function inside the passenger compartment? If not how did you go about getting the wires from t he passenger compartment into the door?

Thanks

Carl.

**Pearl96Max** · 10-25-2009, 12:51 PM

Why are you in the passenger side ? Wires only need to go into the drivers side door. If you dont want the window feature, then there are other routes to take without going into the door, however I would assume that you want to retain that feature.

hotrod37 · 10-25-2009, 02:31 PM

I am not trying to go into the passenger door I am trying to go into the drivers door from the passenger compartment. This is my wife's car and she doesn't even know how to use the window feature, so if there is a way to just lock and unlock the doors without running wires into the door that would be great.

Thanks

Carl

**Pearl96Max** · 10-25-2009, 03:06 PM

I dont recall which wires, but they are available at the SECU, IIRC you need to provide your own pin. What I am curious to know is why you are coming from the passenger side to go to the driver side.

hotrod37 · 10-25-2009, 08:03 PM

Quote:

Originally Posted by Pearl96Max

I dont recall which wires, but they are available at the SECU, IIRC you need to provide your own pin. What I am curious to know is why you are coming from the passenger side to go to the driver side.

I am not coming from the passenger side I am coming from the passenger compartment (the interior of the car) on the drivers side just to the right of the steering wheel and next to the SECU.