ßaller

iTrader: (6)

So should I HP my Diamond Hex S600 @ 50 or 70 hz with 12/24db (These settings are on the amp which is very solid).



- ßaller

1996blackmax

iTrader: (2)

Easiest way to do it is to actually do it, and then listen to what sounds best for your application. My recommendation would be to go with the 70Hz setting.

nismos14

iTrader: (56)

I would go with 70 or 80, though they may be capable of playing lower or may not be capable of playing that low, either way, test it out.

filtor1

iTrader: (7)

Def try each setting, I like my mids and highs to play down to 80-100. But that is a bit high for most peoples taste.

ßaller

iTrader: (6)

Thanks for the tips! I guess my old Xtant had a different SIP module, cus the bass was lower. I actually set the amp to bypass, and turned the headunit xover on, and it sounds pretty good.


- ßaller

djfrestyl

iTrader: (89)

hurts? hertz? I couldn't understand what you were asking from the title lol.

TheBigDu

iTrader: (1)

Yeah, I wasn't sure if he was joking or not...

ßaller

iTrader: (6)

I am considering the 70 and 80, I guess maybe I should set my xover off on everything and get some test tone mp3 and play at those range and see what I like.

I was just saying hurts for fun since it is pronounced that way.



- ßaller