- Hideous phum syndrome
- prep for turbo
- What are the options for fine tuning the AFR?
- Greddy Engine management system???
- 2k Max (Auto) and Turbo
- I'm finally boosted
- oh dear cf hood / SC found a slight problem....
- DOH! I am a retard
- How do I adjust my HKS SSQV??
- (Autometer) Boost Guage Mounting Location
- Ordering ASP pullies...
- Maps / Cfm
- Ordering a new V2 on Monday (BOV or not)
- VG30E, is it possible to turbo?
- V2 In - Stock Y-pipe Sux
- Fuel cut on 4th gear?
- How to swap pulley?
- 6 ribs to 5 ribs....plan to go down to 2.87
- would anyone be interested in...
- Why do turbos make more hp than sc?
- Turbo kit question
- Which Turbo is best for our Maximas?
- Stillen Supercharger Kit-V2
- SE-L Special Mounting bracket?
- Sc + Mevi + Ecu?
- Intercooler or Water Injection kit?
- Will pressure be too high if FMU is here?
- I wanna buy a turbo
- New clutch when installing SC
- Installing Stillen SuperCharger on 1995 Max
- Installing Stillen SuperCharger on 1995 Max
- Blow off valve install question
- What's the optimal AFR?
- Let's talk V1 SC Torque Fellas
- Does anyone have a write-up for the Apexi S-AFC II Install?
- V2 SC install issues
- CAI on a SC
- I've decided [Supercharger Questions]
- BOV inquiry - Blitz Dual Drive
- ok I am boosting an experienced engine.
- Autometer boost gauge
- Engine life with turbocharging?
- What weight oil are you guys using?
- Interesting find on blower...
- Question for the Turbo guys....
- turbo for auto 2k2
- What is boost bleeder valve?
- healp please listen......my SC need advice
- What I did during the Super Bowl
- turbo, supercharger??
- Dyno (finally!)
- Compression test results :)
- So how long did your auto last?
- Just changed spark plugs, now I keep getting the 0115 code...
- There's gotta be a way to boost sooner w/o changing to a smaller pulley...Rods?
- Rebuild Decision Criteria
- Running Max during rebuild
- How can you tell if you were running rich or lean from looking at used spark plugs?
- Why does my BOV sound better facing passenger side than driverside?
- Walbro FP installed, have a few ?'s(long)
- 2000 Maxima Turbo or Supercharger
- Turbo piping
- Need Help converting my boost gague reading.
- Just got my intercooler in-what you think?
- 15psi I could not believe my eyes.
- My car completely died on the highway today
- Progress report and alternator question
- To NOS or not to NOS that is the question!
- Intercooler
- How to adjust alternator belt with the dam Blower in the way?
- Check this out
- ok car is broken...LONG but need HELP !?!?!?!?!?
- 3 options of Motors....help decide
- Completely lost on this fuel pressure stuff....
- Warning: Low Fuel Light started fading in and out, but my fuel is not low?
- Who has a walbro fuel pump on a 5thgen?
- Hobbs switch mod help
- Need part no. on for these two parts of SC
- what is everyones fuel pressure at idle
- Does anything else need to accompany a smaller pulley??
- Fuel pressure equation
- How reliable is a S/C Max?
- What are the chances of blowing my motor with the 3.33"?
- ASP Pulley puller?
- S-AFC Setting after a 5SPD conversion. Will is the be the same as when Auto?
- OK.. I'm lost again..
- turbo kit
- Boosting and OBD II
- belt size for a 3.125 SC pulley
- What is wrong with my SC max?...poor dyno results
- SC setup guage ?
- Final Chapter - Belt replaced, but not aligned
- Adjusting the idle speed
- Turbo Dyno......
- More fuel pressure than expected
- I Need Honest Advice On Pulley Size For V2
- 3.33 Pulley size "6- Rib"?
- Changed the nylon hose and I'm still getting 10Hgmm
- HELP~ the blet is running off the idler pulley~ HELP
- 12:1 FMU disk diameter
- VG30ET v. VQ30DET - compare/contrast
- I just sold my boost to GoldenGlory
- Oil return line hose?
- Sard FPR install
- Hooked up my EGT and FP..
- Boost exhaust question
- A new toy for cars with air induction :)
- MPG or per tank for turbo and supercharger people
- turbo question?
- bigger injectors. What kind of fuel computer/management?
- Is this Flywheel worth it?
- Last minute questions before SC fully reinstalled. please help.
- Does the UDP effect SC
- To all the recently blown maximas
- Boost gauge readings (Poll)
- HELP: Stillen part number question for 95-96 SC'd
- What readings to expect from Fuel Pressure and Boost gauges?
- Walbro FP
- Help...fuel pump question
- I thought that stillen s/c was suppose to make the car run rich
- Is this normal?
- Pics of my ghey gauges...
- SC troubleshooting scenario
- Benefits of Water Spray Kits
- I just changed boost gauges and..
- Auto Gone
- turbo question.
- I am officially SUPERCHARGED!!! But my Setup is VERY odd!! Check it out...
- passing emissions
- SC uninstall AND reinstall - Chapter 2
- Turboing an Automatic 5th Gen Maxima
- Should i get a different y pipe
- When changing boost settings on the turbo Maxs, how does one regulate fuel flow?
- Parts List?
- Where can I get the HKS SSQV inserts?
- Place Racing on s/c!!!
- SC uninstall - Chapter 1
- Supercharged Autos - Hitting the rev limiter?
- Why is my car boosting low?
- What clutch are you using?
- Valve cover filter?
- Any one have BOV for sale
- Info question: Goodyear Gatorback belt sizes?
- my ve turbo
- VI with boost - - always have it open?
- VQ30DET powered maxima will be running again soon!
- Anyone install their own Fuel Pressure gauge?
- does anyone have the HKS SSQV on their SC?
- Crnk Pulley woes
- Any kits to turbo or SC a Ve motor???
- Belts seem to squeek during cold starts..
- Im thinking of supercharging, many questions
- V2 Supercharger kit for sale w/ extra's
- Can a BOV hurt performance?
- Iridium plugs better than copper for boosting?
- Good Idea!!
- '95 SE tweeter + dual autometer gauge pod =
- Jumpin ribs.
- EGT probe location
- First kill.....
- S-AFC Dyno Results needed
- say goodbye to my gates belt
- Is 11 in HG for a 3.33" low?
- Supercharger is weaksauce w/stock pulley?
- Need help w/ supercharger belt size info??
- How significant is a free flow cat-back system to a SC’ed Maxima?
- Gauges in DIN???
- fact or fiction?...
- buying supercharger, have a couple questions
- How long is the vortech warranty?
- 5th gen exhaust w/ boost?
- What kind of T-fitting did you use for the Boost Gauge?
- Can you weld brass to steel?
- Car problems.
- anyone need/want a built engine?
- Should I get the Apexi S-AFC?
- aftermarket knock sensor?
- Quoted: $400-600 and 1 WEEK to install V1 S/C
- SAFC questions with test pipe
- V2 Dyno results (auto)
- Anybody have problems with their radiator hose blowing off?
- Anyone with Turbo & MEVI ?
- Painting Gauge Pod to match Gray interior?
- supercharger problem
- Turbo or Supercharge that the question????
- Optimal exhaust setup for turbo max?
- Are SAFC modules removable?
- Painting the autometer 2 pod pillar
- supercharger thermostat housing install question
- What should I expect to run the 1/4 in after SC?
- Is my belt too tight? See pic
- Hobbs switch
- ****en Check Engine light is on!!
- Good idea to replace all fuel hoses?
- SC pics... a little confused
- I just noticed something odd about my VI!!!!!
- 9 psi with what pulley and at what rpm?
- Successful S/C install, thanks to Jaime
- How does fuel cutoff work in our cars, esp. under boost?
- Who is running the stock FPR with their Supercharger and are you running rich?
- 2002+ Fuel systems, my knowlege and yours
- V2 tensioner assembaly HELP
- Weird squeeky sound coming from S/C..
- Where to get missing parts for autometer gauges??
- How do I depressurize the fuel??
- where are u guys geting your sc
- Who was the person complaining that their car was stalling after installing your BOV?
- Narrowed it down to EGT/Boost/FP via Autometer Phantom.....help an idiot out.
- Need a good source for SSQV flanges??
- Let's talk about EGT gauges and disscuss what means what.
- does hks make a univeral blow off valve?
- HKS has them, but are there any inserts for Greddy BOV's?
- Shopping for Boost and EGT gauges
- Reinstalled the V2 for the second time
- Why not more SC+MEVI people?
- Is there such a thing as an Allen key ratchet?
- What a VQ35 w/ 13lbs of SC boost dyno might look like
- SC CAI install results in blown MAF
- BOV, do I need an aftermarket one or Bosch will do?
- Anyone tries a Turbo XS H BOV?
- Measuring the tightness on the belt
- Opinions on setup
- Follow-up - cold start rattling noise fixed!
- Belt jumping the pulley!
- Sh*T! I still have to grind with a 3.33" Pulley
- A nice SC info write up...
- stronger head gaskets?
- Which way should the pulley on the blower face?
- FMF disk price......I got ripped I think
- Tuning my SC further (long)
- what does a turbo maxima exhaust sound like?
- Supercharger deepens exhaust note?
- S-AFC or something else??
- What does a bad V2 SC sound like?
- Boost gremlins
- can a supercharger exist with turbo?
- Ive decided to go back NA
- Placing a turbo kit on an atuo....
- You won't believe this!
- Boost controller question.
- Finished Install, But Car Won't Start
- Hey Did You See This?
- V2 belt shreds.....
- What pulley do you guys recommend for me? 3.125, 3.33, custom 3.25, ect. Need SC help
- Supercharger CELs.
- oil cooler sandwich adapter fits okay?
- Goodyear Gatorback Belt Part #?
- What RPM does your BOV open?
- is a maxima capable of being a 10 second car?
- Which form of boost would be best for me...