Any good DIY SSIM writeups?

krazy6 · 05-22-2009, 12:36 AM

In a little while I am going to do this, a custom y-pipe, and a 3" exhaust. Then I am going to go get the car tuned with the Uprev program.

Anyone know of a good writeup?
I appreciate it!

krazy6 · 05-23-2009, 01:56 AM

C'mon guys help me out here.

*t6378tp* · 05-23-2009, 07:31 AM

it's easy take the manifold off, remove the vias and elbow. take a saw and make 2 straight cuts in the elbow opening, 1 angle cut in the corner and 1 long cut in the vias opening.

get a dremel with a cutoff wheel and sanding drum and finish it off, all done

**Puppetmaster** · 05-23-2009, 10:37 PM

Once you look inside the IM it will be self explanatory, but what he said ^^ essentially covers it. Just go slow at the beginning because the material is actually pretty soft and remember to clean up as well as possible when you're done.

krazy6 · 05-24-2009, 12:46 AM

Thanks for explaining it

I was just wondering if someone had a step by step picture guide or some sh1t lol.

VQpwrdSpeC · 06-05-2009, 09:18 AM

Here ya go, this is pretty much how I did mine...

http://myspecv.com/f/t158294-ported-...fold-pics.html

Augustus Maximus · 08-13-2009, 05:25 AM

Quote:

Originally Posted by VQpwrdSpeC

Here ya go, this is pretty much how I did mine...

http://myspecv.com/f/t158294-ported-...fold-pics.html

deadasslink.

eric02SpecVQ · 08-13-2009, 09:30 AM

Yes, the link is dead. The owner of that site decided he was done keeping the site. So instead of passing off ownership....he just pulled the plug.