Advanced Suspension, Chassis, and BrakingTalk about suspension geometry, advanced handling/chassis setup, custom brakes, etc. NOT your basic brake pads and "best drop" Information.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
i installed them over jic on the 4th gen i was building. never got a chance to drive it though. installation is on the 4/5g suspension design and there are no clearance issues (which can cause problems) like on some other cars.
really hard to beat value wise and, short of the much more expensive airrunner a33 setup, i wouldn't touch anything else.
*edit - i'm a dealer btw so you can take it with a grain of salt, take advantage of the contact, or somewhere in between. lmk if you have any more questions. specific or general.
Last edited by BLACKonBLACK98; 08-04-2009 at 03:07 PM.
seen it before.. have no peronal experience, try em man i'd like to see suttn different also, good luck
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
i installed them over jic on the 4th gen i was building. never got a chance to drive it though. installation is on the 4/5g suspension design and there are no clearance issues (which can cause problems) like on some other cars.
really hard to beat value wise and, short of the much more expensive airrunner a33 setup, i wouldn't touch anything else.
*edit - i'm a dealer btw so you can take it with a grain of salt, take advantage of the contact, or somewhere in between. lmk if you have any more questions. specific or general.
I will do that! thx. I will however be taking a small recovery period since my car is in the shop having a new interior and system put in. and next the headers back emanage ultimate, then the bags.
I will be adding you to my contacts is that OK?
Linear Mode
