Code PO300 Random Misfire
#1
Code PO300 Random Misfire
Ok so i get a PO300 random misfire, on my moms 99 max i have checked coil packs all work great, injectors all spray, and has new plugs in it... ANY CLUES ON WHAT ELSE IT COULD BE? also it has a new MAF in it.. Any help would be appreciated.. Thanks in advance
#4
KS wont cause misfire, only loss of power and low MPG. Why was the MAF replaced and did the misfire start after or before MAF swap? How did you check the coils? Working at idle doesn't mean they will work under load, cylinder pressure increases resistance at the plug gap.
#6
KS was replaced when i did the VCG and Intake gaskets,,, MAF was swaped because it didnt work anymore would let the car go above 1500 rpm at idle, the misfire was there before the swap of the MAF and the new plugs i put in it. I checked coils by unpluggin them but not underload,
Now the wierd thing is that it doesnt do it all the time, and when it does it you can barely feel it but its there
Now the wierd thing is that it doesnt do it all the time, and when it does it you can barely feel it but its there
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM