Power tilting mirrors in reverse stopped working
#2
From the 2011 owner's manual:
Is the mirror switch in Neutral?
NOTE:
If the outside mirror control switch is in the
neutral position, neither mirror will turn
downward when the shift selector is moved
to R (Reverse).
Move the shift selector to R (Reverse). Both
mirrors will turn downward.
The mirror surfaces will return to their original
position when any of the following have occurred:
● The shift selector is moved to any position
other than R (Reverse).
● The outside mirror control switch is set to the
neutral or center position.
● The ignition switch is placed in the OFF
position.
If the outside mirror control switch is in the
neutral position, neither mirror will turn
downward when the shift selector is moved
to R (Reverse).
Move the shift selector to R (Reverse). Both
mirrors will turn downward.
The mirror surfaces will return to their original
position when any of the following have occurred:
● The shift selector is moved to any position
other than R (Reverse).
● The outside mirror control switch is set to the
neutral or center position.
● The ignition switch is placed in the OFF
position.
#7
thanks from me as well, just the other day i was thinking "i could have SWORN my mirrors used to tilt when i backed up" but i thought it might have been one of the other cars i test drove, haha.
#8
Thread
Thread Starter
Forum
Replies
Last Post
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
08-27-2015 08:27 PM
BobMax
4th Generation Maxima (1995-1999)
1
08-15-2015 12:35 PM