Replace outer tie rod How to
#1
Replace outer tie rod How to
yes yes, I searched and I searched, but no definitive step by step with pictures, I NEED PICTURES, or I am at the mercy of my shop.
My parts store informed it should take only 10 minutes if it isn't seized or warm up my blow torch.
Anyone have have something?
Thanks
My parts store informed it should take only 10 minutes if it isn't seized or warm up my blow torch.
Anyone have have something?
Thanks
#2
very easy jobtake tire off get tie rod seperator 10 buck at adavnce take cotter pin out 19mm nut take off put tie rod seperator on hit it with hammer a few times tak lock nut loose count how many turn it takes to get off install in reverse order then get an alighnment
Last edited by luke95gxe; 05-12-2010 at 02:56 PM.
#4
#7
Parts Source asked what size of tie rod separator tool.
I am having a hell of a time loosening the bolt on the inner tie rod.
From the videos I gather counter-clockwise direction is with wrench going downwards that is facing the whole assembly.
I am having a hell of a time loosening the bolt on the inner tie rod.
From the videos I gather counter-clockwise direction is with wrench going downwards that is facing the whole assembly.
#11
Here dude... I made a write up a few years ago. Its nearly the same http://forums.maxima.org/3rd-generat...t-writeup.html
Thread
Thread Starter
Forum
Replies
Last Post
6spd4dsc
5th Generation Classifieds (2000-2003)
4
03-04-2016 05:19 PM
dvcamp
6th Generation Maxima (2004-2008)
7
09-18-2015 10:17 AM
Maxima30
5th Generation Maxima (2000-2003)
2
09-07-2015 06:13 PM