Hey man, thanks for the comment on the ride.
I currently have 275/30/20 on the front and
285/30/20 in the rear with absolutely "NO RUBBING"
what-so-ever. I did shave a very small section off
the inner quarter panels to make sure I obtained
excellent clearance. I know alot of guys here don't
want to DIY on some projects, but this was extremely
easy. Maybe took me 3 to 5 minutes per side and most
of that time was making sure it was precise. If your not
comfortable with 285's then stick 275/20/30 for the rear.
The wheel offset is a huge factor in this situation as well.
Make sure if your going 20x10 in the rear that you don't go
below +38 for comfort/clearance. I have a pic of when I
shaved the rear quarter panel before touching it up.
It came out really clean once it was all complete.
OH! Before I went 285's in the rear I had 275's all around.
This is right after I shaved off some of that thin piece of metal on the quarter-panel.
http://forums.maxima.org/private.php...pm&pmid=940335