Quote:
Originally Posted by phatboislim
question regarding this o2 simulator install..does the o2 sensor need to be removed that your are using the simulator for?
also are the wire colors diff from the 5th to 5.5 gen?
|
Well i installed the sim in its according to this write up but and I also installed two heater resistors, one for each sensor and I cut out the sensor. It worked fine for a week but then my sim went out again.
So this set up did not work for me. The reason I cut off the sensors off I because I broke them Both when I was installing the headers and hat is why I went with this set up.
Now I was reading that u can weld the sensors after ur cat but that's a problem for me because I'm running straight pipes all da way.
Ink if the wiring is he same as the 5.5