View Single Post
Old 07-10-2009, 06:02 PM   #13
pmohr
The Dirty Pearl
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
iTrader: (19)
Posts: 13,346

Quote:
Originally Posted by dannysm213 View Post
Thanks pmohr for that info.

I finally got the chance to check the ABS codes the manual way. It seems like it was throwing two codes at me:

1) Long Short Short
2) Long Long Short Short Short Short Short

Can you help me figure out what those mean? I couldn't find a guide online.

Thanks
Code 12 either means the same as 0505 for the CEL (everything's okay) if it isn't followed by any other codes, otherwise it's just used to signify the start of code reading.

Code 35 is your left rear sensor.

Check the FSM diagnostics, Brake section, starting page 48 (BR-48). That'll guide you through checking it out.

Brake section PDF: http://boredmder.com/FSM/Nissan/Maxima/1998/br.pdf

Before doing that though, I'd just pull the sensor (you're lucky it isn't a front sensor, they rarely like to come out in one piece) and take a look at it. Also check the harness connector, it runs right along the trailing arm IIRC (in that area, anyway).

Note E and F (sensor and harness connector, respectively):
__________________
Quote:
Originally Posted by 2damax View Post
This jerk is right so often I just search threads hoping he gets something wrong so I can catch him
Quote:
Originally Posted by kizzmyazz View Post
ok so what i found out is that because of the FMU, i dont need to get injectors because it will neutralize the oil pressure to prevent detotnation
FSMs | A32 CEL Decoder | Howto Videos
pmohr is offline   Reply With Quote